Konica Revio KD-310Z vs. Konica Revio KD-510Z
Comparison
change cameras » | |||||
|
vs |
|
|||
Konica Revio KD-310Z | Konica Revio KD-510Z | ||||
check price » | check price » |
Megapixels
3.20
5.36
Max. image resolution
2048 x 1536
2592 x 1944
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Konica Revio KD-310Z | Konica Revio KD-510Z |
Surface area:
37.90 mm² | vs | 37.90 mm² |
Difference: 0 mm² (0%)
KD-310Z and KD-510Z sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.82 µm² (68%)
A pixel on Konica KD-310Z sensor is approx. 68% bigger than a pixel on Konica KD-510Z.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Konica KD-310Z
Konica KD-510Z
Total megapixels
Effective megapixels
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
50, 100, 200, 400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
10 cm
6 cm
Focal length (35mm equiv.)
39 - 117 mm
39 - 117 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.9
f2.8 - f4.9
Metering
Centre weighted, Spot
Centre weighted, Spot
Exposure compensation
±1.5 EV (in 1/3 EV steps)
±1.5 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1 sec
15 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
6
6
Screen size
1.5"
1.5"
Screen resolution
110,000 dots
118,000 dots
Video capture
Max. video resolution
Storage types
Memory Stick, MultiMedia, Secure Digital
Memory Stick, MultiMedia, Secure Digital
USB
USB 1.1
USB 1.0
HDMI
Wireless
GPS
Battery
Li-Ion
Lithium-Ion rechargeable
Weight
198 g
200 g
Dimensions
94 x 56 x 30 mm
94 x 56 x 30 mm
Year
2002
2003
Choose cameras to compare
Popular comparisons:
- Konica Revio KD-310Z vs. Konica Revio KD-300Z
- Konica Revio KD-310Z vs. Konica Revio KD-510Z
- Konica Revio KD-310Z vs. Konica Revio KD-3300Z
- Konica Revio KD-310Z vs. Konica-Minolta DiMAGE G530
- Konica Revio KD-310Z vs. Canon PowerShot G7 X Mark II
- Konica Revio KD-310Z vs. Canon DIGITAL IXUS 55
- Konica Revio KD-310Z vs. Minolta DiMAGE G500
- Konica Revio KD-310Z vs. Minolta DiMAGE E323
- Konica Revio KD-310Z vs. Samsung PL20
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Konica KD-310Z diagonal
The diagonal of KD-310Z sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Konica KD-510Z diagonal
The diagonal of KD-510Z sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
KD-310Z sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
KD-510Z sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
KD-310Z pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2063 pixels
Sensor resolution width = 2063 pixels
Pixel pitch = | 7.11 | × 1000 | = 3.45 µm |
2063 |
KD-510Z pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2671 pixels
Sensor resolution width = 2671 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.66 µm |
2671 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
KD-310Z pixel area
Pixel pitch = 3.45 µm
Pixel area = 3.45² = 11.9 µm²
Pixel area = 3.45² = 11.9 µm²
KD-510Z pixel area
Pixel pitch = 2.66 µm
Pixel area = 2.66² = 7.08 µm²
Pixel area = 2.66² = 7.08 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
KD-310Z pixel density
Sensor resolution width = 2063 pixels
Sensor width = 0.711 cm
Pixel density = (2063 / 0.711)² / 1000000 = 8.42 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2063 / 0.711)² / 1000000 = 8.42 MP/cm²
KD-510Z pixel density
Sensor resolution width = 2671 pixels
Sensor width = 0.711 cm
Pixel density = (2671 / 0.711)² / 1000000 = 14.11 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2671 / 0.711)² / 1000000 = 14.11 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
KD-310Z sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.20
Resolution horizontal: X × r = 1551 × 1.33 = 2063
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
Sensor height = 5.33 mm
Effective megapixels = 3.20
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1551
Sensor resolution = 2063 x 1551
KD-510Z sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.36
Resolution horizontal: X × r = 2008 × 1.33 = 2671
Resolution vertical: X = 2008
Sensor resolution = 2671 x 2008
Sensor height = 5.33 mm
Effective megapixels = 5.36
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2008
Sensor resolution = 2671 x 2008
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
KD-310Z crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
KD-510Z crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
KD-310Z equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
KD-510Z equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.87 = f13.6 - f23.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.