Leica Digilux 2 vs. Fujifilm X20
Comparison
change cameras » | |||||
|
vs |
|
|||
Leica Digilux 2 | Fujifilm X20 | ||||
check price » | check price » |
Megapixels
4.90
12.00
Max. image resolution
2560 x 1920
4000 x 3000
Sensor
Sensor type
CCD
CMOS
Sensor size
2/3" (~ 8.8 x 6.6 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Leica Digilux 2 | Fujifilm X20 |
Surface area:
58.08 mm² | vs | 58.08 mm² |
Difference: 0 mm² (0%)
Digilux 2 and X20 sensors are the same size.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Leica Digilux 2 (2003) and Fujifilm X20 (2013).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 7.06 µm² (146%)
A pixel on Leica Digilux 2 sensor is approx. 146% bigger than a pixel on Fujifilm X20.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica Digilux 2
Fujifilm X20
Total megapixels
5.20
Effective megapixels
4.90
12.00
Optical zoom
3.2x
4x
Digital zoom
Yes
Yes
ISO sensitivity
100, 200, 400
Auto, 100, 200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400, 12800
RAW
Manual focus
Normal focus range
30 cm
50 cm
Macro focus range
30 cm
1 cm
Focal length (35mm equiv.)
28 - 90 mm
28 - 112 mm
Aperture priority
Yes
Yes
Max. aperture
f2.0 - f2.4
f2.0 - f2.8
Metering
Centre weighted, Multi-segment, Spot
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Optical (tunnel)
White balance presets
7
7
Screen size
2.5"
2.8"
Screen resolution
211,000 dots
460,000 dots
Video capture
Max. video resolution
1920x1080 (60p)
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion 1400 mAh supplied
Lithium-Ion NP-50 rechargeable battery
Weight
630 g
353 g
Dimensions
135 x 82 x 103 mm
117 x 69.6 x 56.8 mm
Year
2003
2013
Choose cameras to compare
Popular comparisons:
- Leica Digilux 2 vs. Panasonic Lumix DMC-LC1
- Leica Digilux 2 vs. Leica Digilux 3
- Leica Digilux 2 vs. Leica M8
- Leica Digilux 2 vs. Leica X1
- Leica Digilux 2 vs. Fujifilm X100S
- Leica Digilux 2 vs. Leica M9
- Leica Digilux 2 vs. Fujifilm X20
- Leica Digilux 2 vs. Leica Q (Typ 116)
- Leica Digilux 2 vs. Nikon D300s
- Leica Digilux 2 vs. Nikon 1 V1
- Leica Digilux 2 vs. Leica V-LUX 2
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Leica Digilux 2 diagonal
The diagonal of Digilux 2 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Fujifilm X20 diagonal
The diagonal of X20 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Digilux 2 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
X20 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Digilux 2 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 2552 pixels
Sensor resolution width = 2552 pixels
Pixel pitch = | 8.80 | × 1000 | = 3.45 µm |
2552 |
X20 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 3995 pixels
Sensor resolution width = 3995 pixels
Pixel pitch = | 8.80 | × 1000 | = 2.2 µm |
3995 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Digilux 2 pixel area
Pixel pitch = 3.45 µm
Pixel area = 3.45² = 11.9 µm²
Pixel area = 3.45² = 11.9 µm²
X20 pixel area
Pixel pitch = 2.2 µm
Pixel area = 2.2² = 4.84 µm²
Pixel area = 2.2² = 4.84 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Digilux 2 pixel density
Sensor resolution width = 2552 pixels
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
Sensor width = 0.88 cm
Pixel density = (2552 / 0.88)² / 1000000 = 8.41 MP/cm²
X20 pixel density
Sensor resolution width = 3995 pixels
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor width = 0.88 cm
Pixel density = (3995 / 0.88)² / 1000000 = 20.61 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Digilux 2 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 4.90
Resolution horizontal: X × r = 1919 × 1.33 = 2552
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Sensor height = 6.60 mm
Effective megapixels = 4.90
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
X20 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 12.00
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Sensor height = 6.60 mm
Effective megapixels = 12.00
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Digilux 2 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
X20 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Digilux 2 equivalent aperture
Crop factor = 3.93
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 3.93 = f7.9 - f9.4
X20 equivalent aperture
Crop factor = 3.93
Aperture = f2.0 - f2.8
35-mm equivalent aperture = (f2.0 - f2.8) × 3.93 = f7.9 - f11
Aperture = f2.0 - f2.8
35-mm equivalent aperture = (f2.0 - f2.8) × 3.93 = f7.9 - f11
More comparisons of Leica Digilux 2:
- Leica Digilux 2 vs. Leica D-Lux 6
- Leica Digilux 2 vs. Panasonic Lumix DMC-FX07
- Leica Digilux 2 vs. Canon EOS D60
- Leica Digilux 2 vs. Olympus OM-D E-M1
- Leica Digilux 2 vs. Sony Cyber-shot DSC-RX100
- Leica Digilux 2 vs. Sigma DP2 Merrill
- Leica Digilux 2 vs. Nikon D40
- Leica Digilux 2 vs. Canon EOS 5D Mark III
- Leica Digilux 2 vs. Panasonic Lumix DMC-LX7
- Leica Digilux 2 vs. Leica D-LUX 4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.