Leica M10 (Typ 3656) vs. Fujifilm X-T2
Comparison
change cameras » | |||||
|
vs |
|
|||
Leica M10 (Typ 3656) | Fujifilm X-T2 | ||||
check price » | check price » |
Megapixels
24.00
24.30
Max. image resolution
5952 x 3968
6000 x 4000
Sensor
Sensor type
CMOS
CMOS
Sensor size
36 x 24 mm
23.6 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
2.35 | : | 1 |
(ratio) | ||
Leica M10 (Typ 3656) | Fujifilm X-T2 |
Surface area:
864.00 mm² | vs | 368.16 mm² |
Difference: 495.84 mm² (135%)
M10 (Typ 3656) sensor is approx. 2.35x bigger than X-T2 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 20.79 µm² (137%)
A pixel on Leica M10 (Typ 3656) sensor is approx. 137% bigger than a pixel on Fujifilm X-T2.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Leica M10 (Typ 3656)
Fujifilm X-T2
Total megapixels
Effective megapixels
24.00
24.30
Optical zoom
Digital zoom
No
No
ISO sensitivity
Auto, 100-50000
Auto, 200 -12800 (expands to 100-51200)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
125 sec
30 sec
Max. shutter speed
1/4000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Optical (rangefinder)
Electronic
White balance presets
8
7
Screen size
3"
3"
Screen resolution
1,036,800 dots
1,040,000 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC (UHS II)
USB
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
Lithium-ion rechargeable battery
NP-W126S lithium-ion battery
Weight
660 g
507 g
Dimensions
139 x 38.5 x 80 mm
132.5 x 91.8 x 49.2 mm
Year
2017
2016
Choose cameras to compare
Popular comparisons:
- Leica M10 (Typ 3656) vs. Leica Q (Typ 116)
- Leica M10 (Typ 3656) vs. Fujifilm X100F
- Leica M10 (Typ 3656) vs. Leica M Monochrom (Typ 246)
- Leica M10 (Typ 3656) vs. Leica M Typ 240
- Leica M10 (Typ 3656) vs. Fujifilm X-Pro2
- Leica M10 (Typ 3656) vs. Leica M9
- Leica M10 (Typ 3656) vs. Leica M (Typ 262)
- Leica M10 (Typ 3656) vs. Leica SL (Typ 601)
- Leica M10 (Typ 3656) vs. Nikon D810
- Leica M10 (Typ 3656) vs. Sony Alpha 7S II
- Leica M10 (Typ 3656) vs. Fujifilm X-T2
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Leica M10 (Typ 3656) diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Fujifilm X-T2 diagonal
w = 23.60 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √ | 23.60² + 15.60² | = 28.29 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
M10 (Typ 3656) sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
X-T2 sensor area
Width = 23.60 mm
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
M10 (Typ 3656) pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 6000 pixels
Sensor resolution width = 6000 pixels
Pixel pitch = | 36.00 | × 1000 | = 6 µm |
6000 |
X-T2 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 6058 pixels
Sensor resolution width = 6058 pixels
Pixel pitch = | 23.60 | × 1000 | = 3.9 µm |
6058 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
M10 (Typ 3656) pixel area
Pixel pitch = 6 µm
Pixel area = 6² = 36 µm²
Pixel area = 6² = 36 µm²
X-T2 pixel area
Pixel pitch = 3.9 µm
Pixel area = 3.9² = 15.21 µm²
Pixel area = 3.9² = 15.21 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
M10 (Typ 3656) pixel density
Sensor resolution width = 6000 pixels
Sensor width = 3.6 cm
Pixel density = (6000 / 3.6)² / 1000000 = 2.78 MP/cm²
Sensor width = 3.6 cm
Pixel density = (6000 / 3.6)² / 1000000 = 2.78 MP/cm²
X-T2 pixel density
Sensor resolution width = 6058 pixels
Sensor width = 2.36 cm
Pixel density = (6058 / 2.36)² / 1000000 = 6.59 MP/cm²
Sensor width = 2.36 cm
Pixel density = (6058 / 2.36)² / 1000000 = 6.59 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
M10 (Typ 3656) sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 24.00
Resolution horizontal: X × r = 4000 × 1.5 = 6000
Resolution vertical: X = 4000
Sensor resolution = 6000 x 4000
Sensor height = 24.00 mm
Effective megapixels = 24.00
r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 4000
Sensor resolution = 6000 x 4000
X-T2 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.60 mm
Effective megapixels = 24.30
Resolution horizontal: X × r = 4012 × 1.51 = 6058
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Sensor height = 15.60 mm
Effective megapixels = 24.30
r = 23.60/15.60 = 1.51 |
|
Resolution vertical: X = 4012
Sensor resolution = 6058 x 4012
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
M10 (Typ 3656) crop factor
Sensor diagonal in mm = 43.27 mm
Crop factor = | 43.27 | = 1 |
43.27 |
X-T2 crop factor
Sensor diagonal in mm = 28.29 mm
Crop factor = | 43.27 | = 1.53 |
28.29 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
M10 (Typ 3656) equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Leica M10 (Typ 3656), take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Leica M10 (Typ 3656) is 1, the equivalent aperture is aperture.
Since crop factor for Leica M10 (Typ 3656) is 1, the equivalent aperture is aperture.
X-T2 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Fujifilm X-T2, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Fujifilm X-T2 is 1.53
Crop factor for Fujifilm X-T2 is 1.53
More comparisons of Leica M10 (Typ 3656):
- Leica M10 (Typ 3656) vs. Nikon D750
- Leica M10 (Typ 3656) vs. Nikon Df
- Leica M10 (Typ 3656) vs. Sigma DP2 Merrill
- Leica M10 (Typ 3656) vs. Olympus PEN-F
- Leica M10 (Typ 3656) vs. Canon EOS-1D X Mark II
- Leica M10 (Typ 3656) vs. Canon EOS 6D
- Leica M10 (Typ 3656) vs. Nikon D850
- Leica M10 (Typ 3656) vs. Canon EOS 5DS R
- Leica M10 (Typ 3656) vs. Sony Alpha a6000
- Leica M10 (Typ 3656) vs. Olympus OM-D E-M1 Mark II
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.