Minolta DiMAGE A1 vs. Nikon 1 V1
Comparison
change cameras » | |||||
|
vs |
|
|||
Minolta DiMAGE A1 | Nikon 1 V1 | ||||
check price » | check price » |
Megapixels
5.30
10.10
Max. image resolution
2560 x 1920
3872 x 2592
Sensor
Sensor type
CCD
CMOS
Sensor size
2/3" (~ 8.8 x 6.6 mm)
13.2 x 8.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 2 |
(ratio) | ||
Minolta DiMAGE A1 | Nikon 1 V1 |
Surface area:
58.08 mm² | vs | 116.16 mm² |
Difference: 58.08 mm² (100%)
1 V1 sensor is approx. 2x bigger than DiMAGE A1 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Minolta DiMAGE A1 (2003) and Nikon 1 V1 (2011).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.53 µm² (5%)
A pixel on Nikon 1 V1 sensor is approx. 5% bigger than a pixel on Minolta DiMAGE A1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Minolta DiMAGE A1
Nikon 1 V1
Total megapixels
12.00
Effective megapixels
10.10
Optical zoom
7.1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800
100 - 3200, 6400
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
13 cm
Focal length (35mm equiv.)
28 - 200 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f3.5
Metering
Centre weighted, Multi-segment, Spot
Centre weighted, Matrix, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/16000 sec
1/16000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
7
8
Screen size
1.8"
3"
Screen resolution
118,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
SDHC, SDXC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Lithium-Ion EN-EL15 rechargeable battery
Weight
560 g
294 g
Dimensions
117 x 85 x 113.5 mm
113 x 76 x 43.5 mm
Year
2003
2011
Choose cameras to compare
Popular comparisons:
- Minolta DiMAGE A1 vs. Konica-Minolta DiMAGE A2
- Minolta DiMAGE A1 vs. Minolta DiMAGE 7Hi
- Minolta DiMAGE A1 vs. Minolta DiMAGE 7
- Minolta DiMAGE A1 vs. Konica-Minolta DiMAGE A200
- Minolta DiMAGE A1 vs. Nikon 1 V1
- Minolta DiMAGE A1 vs. Nikon D3000
- Minolta DiMAGE A1 vs. Fujifilm X-S1
- Minolta DiMAGE A1 vs. Nikon D60
- Minolta DiMAGE A1 vs. Canon EOS Rebel T3
- Minolta DiMAGE A1 vs. Olympus OM-D E-M5
- Minolta DiMAGE A1 vs. Minolta DiMAGE 7i
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Minolta DiMAGE A1 diagonal
The diagonal of DiMAGE A1 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Nikon 1 V1 diagonal
w = 13.20 mm
h = 8.80 mm
h = 8.80 mm
Diagonal = √ | 13.20² + 8.80² | = 15.86 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE A1 sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
1 V1 sensor area
Width = 13.20 mm
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
DiMAGE A1 pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 2655 pixels
Sensor resolution width = 2655 pixels
Pixel pitch = | 8.80 | × 1000 | = 3.31 µm |
2655 |
1 V1 pixel pitch
Sensor width = 13.20 mm
Sensor resolution width = 3893 pixels
Sensor resolution width = 3893 pixels
Pixel pitch = | 13.20 | × 1000 | = 3.39 µm |
3893 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
DiMAGE A1 pixel area
Pixel pitch = 3.31 µm
Pixel area = 3.31² = 10.96 µm²
Pixel area = 3.31² = 10.96 µm²
1 V1 pixel area
Pixel pitch = 3.39 µm
Pixel area = 3.39² = 11.49 µm²
Pixel area = 3.39² = 11.49 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
DiMAGE A1 pixel density
Sensor resolution width = 2655 pixels
Sensor width = 0.88 cm
Pixel density = (2655 / 0.88)² / 1000000 = 9.1 MP/cm²
Sensor width = 0.88 cm
Pixel density = (2655 / 0.88)² / 1000000 = 9.1 MP/cm²
1 V1 pixel density
Sensor resolution width = 3893 pixels
Sensor width = 1.32 cm
Pixel density = (3893 / 1.32)² / 1000000 = 8.7 MP/cm²
Sensor width = 1.32 cm
Pixel density = (3893 / 1.32)² / 1000000 = 8.7 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE A1 sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 5.30
Resolution horizontal: X × r = 1996 × 1.33 = 2655
Resolution vertical: X = 1996
Sensor resolution = 2655 x 1996
Sensor height = 6.60 mm
Effective megapixels = 5.30
r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1996
Sensor resolution = 2655 x 1996
1 V1 sensor resolution
Sensor width = 13.20 mm
Sensor height = 8.80 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2595 × 1.5 = 3893
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Sensor height = 8.80 mm
Effective megapixels = 10.10
r = 13.20/8.80 = 1.5 |
|
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
DiMAGE A1 crop factor
Sensor diagonal in mm = 11.00 mm
Crop factor = | 43.27 | = 3.93 |
11.00 |
1 V1 crop factor
Sensor diagonal in mm = 15.86 mm
Crop factor = | 43.27 | = 2.73 |
15.86 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE A1 equivalent aperture
Crop factor = 3.93
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 3.93 = f11 - f13.8
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 3.93 = f11 - f13.8
1 V1 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Nikon 1 V1, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Nikon 1 V1 is 2.73
Crop factor for Nikon 1 V1 is 2.73
More comparisons of Minolta DiMAGE A1:
- Minolta DiMAGE A1 vs. Panasonic Lumix DMC-FZ50
- Minolta DiMAGE A1 vs. Canon EOS 70D
- Minolta DiMAGE A1 vs. Sony Cyber-shot DSC-HX9V
- Minolta DiMAGE A1 vs. Konica-Minolta Dynax 5D
- Minolta DiMAGE A1 vs. Nikon Coolpix P7700
- Minolta DiMAGE A1 vs. Fujifilm X30
- Minolta DiMAGE A1 vs. Canon PowerShot S5 IS
- Minolta DiMAGE A1 vs. Olympus E-1
- Minolta DiMAGE A1 vs. Fujifilm FinePix S6500fd
- Minolta DiMAGE A1 vs. Fujifilm FinePix S8000fd
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.