Minolta DiMAGE F200 vs. Minolta DiMAGE F100
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Minolta DiMAGE F200 | Minolta DiMAGE F100 | ||||
| check price » | check price » | ||||
Megapixels
4.10
4.10
Max. image resolution
2272 x 1704
2272 x 1704
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1 |
| (ratio) | ||
| Minolta DiMAGE F200 | Minolta DiMAGE F100 | |
Surface area:
| 37.90 mm² | vs | 37.90 mm² |
Difference: 0 mm² (0%)
DiMAGE F200 and DiMAGE F100 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
Minolta DiMAGE F200 and Minolta DiMAGE F100 have the same pixel area.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Minolta DiMAGE F200
Minolta DiMAGE F100
Total megapixels
Effective megapixels
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800
Auto, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
50 cm
55 cm
Macro focus range
20 cm
15 cm
Focal length (35mm equiv.)
38 - 114 mm
38 - 114 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.7
f2.8 - f4.7
Metering
Centre weighted, Multi-segment, Spot
256-segment Matrix, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
15 sec
1 sec
Max. shutter speed
1/1000 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
7
7
Screen size
1.5"
1.5"
Screen resolution
110,000 dots
110,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
MultiMedia, Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
245 g
245 g
Dimensions
111 x 52 x 32 mm
111 x 52 x 32 mm
Year
2003
2002
Choose cameras to compare
Popular comparisons:
- Minolta DiMAGE F200 vs. Minolta DiMAGE F300
- Minolta DiMAGE F200 vs. Minolta DiMAGE F100
- Minolta DiMAGE F200 vs. Canon PowerShot A590 IS
- Minolta DiMAGE F200 vs. Canon PowerShot S95
- Minolta DiMAGE F200 vs. Kodak EasyShare M550
- Minolta DiMAGE F200 vs. Casio Exilim EX-Z270
- Minolta DiMAGE F200 vs. Kodak EasyShare C360
- Minolta DiMAGE F200 vs. Konica-Minolta DiMAGE Z6
- Minolta DiMAGE F200 vs. Nikon Coolpix S9600
- Minolta DiMAGE F200 vs. Minolta DiMAGE X20
- Minolta DiMAGE F200 vs. Minolta DiMAGE G400
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Minolta DiMAGE F200 diagonal
The diagonal of DiMAGE F200 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Minolta DiMAGE F100 diagonal
The diagonal of DiMAGE F100 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
DiMAGE F200 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
DiMAGE F100 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
DiMAGE F200 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2335 pixels
Sensor resolution width = 2335 pixels
| Pixel pitch = | 7.11 | × 1000 | = 3.04 µm |
| 2335 |
DiMAGE F100 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2335 pixels
Sensor resolution width = 2335 pixels
| Pixel pitch = | 7.11 | × 1000 | = 3.04 µm |
| 2335 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
DiMAGE F200 pixel area
Pixel pitch = 3.04 µm
Pixel area = 3.04² = 9.24 µm²
Pixel area = 3.04² = 9.24 µm²
DiMAGE F100 pixel area
Pixel pitch = 3.04 µm
Pixel area = 3.04² = 9.24 µm²
Pixel area = 3.04² = 9.24 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
DiMAGE F200 pixel density
Sensor resolution width = 2335 pixels
Sensor width = 0.711 cm
Pixel density = (2335 / 0.711)² / 1000000 = 10.79 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2335 / 0.711)² / 1000000 = 10.79 MP/cm²
DiMAGE F100 pixel density
Sensor resolution width = 2335 pixels
Sensor width = 0.711 cm
Pixel density = (2335 / 0.711)² / 1000000 = 10.79 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2335 / 0.711)² / 1000000 = 10.79 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
DiMAGE F200 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 4.10
Resolution horizontal: X × r = 1756 × 1.33 = 2335
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
Sensor height = 5.33 mm
Effective megapixels = 4.10
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
DiMAGE F100 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 4.10
Resolution horizontal: X × r = 1756 × 1.33 = 2335
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
Sensor height = 5.33 mm
Effective megapixels = 4.10
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1756
Sensor resolution = 2335 x 1756
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
DiMAGE F200 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
DiMAGE F100 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
DiMAGE F200 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 4.87 = f13.6 - f22.9
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 4.87 = f13.6 - f22.9
DiMAGE F100 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 4.87 = f13.6 - f22.9
Aperture = f2.8 - f4.7
35-mm equivalent aperture = (f2.8 - f4.7) × 4.87 = f13.6 - f22.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.