Nikon Coolpix 5400 vs. Olympus XZ-1

Comparison

change cameras »
Coolpix 5400 image
vs
XZ-1 image
Nikon Coolpix 5400 Olympus XZ-1
check price » check price »
Megapixels
5.00
10.00
Max. image resolution
2592 x 1944
3648 x 2736

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.63" (~ 7.85 x 5.89 mm)
Sensor resolution
2579 x 1939
3647 x 2742
Diagonal
8.89 mm
9.81 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1.22
(ratio)
Nikon Coolpix 5400 Olympus XZ-1
Surface area:
37.90 mm² vs 46.24 mm²
Difference: 8.34 mm² (22%)
XZ-1 sensor is approx. 1.22x bigger than 5400 sensor.
Note: You are comparing sensors of very different generations. There is a gap of 8 years between Nikon 5400 (2003) and Olympus XZ-1 (2011). Eight years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.
Pixel pitch
2.76 µm
2.15 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.61 µm (28%)
Pixel pitch of 5400 is approx. 28% higher than pixel pitch of XZ-1.
Pixel area
7.62 µm²
4.62 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3 µm² (65%)
A pixel on Nikon 5400 sensor is approx. 65% bigger than a pixel on Olympus XZ-1.
Pixel density
13.16 MP/cm²
21.58 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 8.42 µm (64%)
Olympus XZ-1 has approx. 64% higher pixel density than Nikon 5400.
To learn about the accuracy of these numbers, click here.



Specs

Nikon 5400
Olympus XZ-1
Crop factor
4.87
4.41
Total megapixels
5.20
Effective megapixels
5.00
10.00
Optical zoom
4.1x
4x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 100 - 6400
RAW
Manual focus
Normal focus range
50 cm
60 cm
Macro focus range
10 cm
1 cm
Focal length (35mm equiv.)
28 - 116 mm
28 - 112 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.6
f1.8 - f2.5
Max. aperture (35mm equiv.)
f13.6 - f22.4
f7.9 - f11
Metering
256-segment Matrix, Centre weighted, Spot, Spot-AF
Centre weighted, ESP Digital, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
Bulb+10 sec
Bulb+16min sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic (optional)
White balance presets
7
7
Screen size
1.5"
3"
Screen resolution
134,000 dots
610,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
SDHC, SDXC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Nikon EN-EL1 Lithium-Ion included
Lithium-Ion Li-50B rechargeable battery
Weight
330 g
275 g
Dimensions
108 x 73 x 69 mm
110.6 x 64.8 x 42.3 mm
Year
2003
2011




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Nikon 5400 diagonal

The diagonal of 5400 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm

Olympus XZ-1 diagonal

The diagonal of XZ-1 sensor is not 1/1.63 or 0.61" (15.6 mm) as you might expect, but approximately two thirds of that value - 9.81 mm. If you want to know why, see sensor sizes.

w = 7.85 mm
h = 5.89 mm
Diagonal =  7.85² + 5.89²   = 9.81 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

5400 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

XZ-1 sensor area

Width = 7.85 mm
Height = 5.89 mm

Surface area = 7.85 × 5.89 = 46.24 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

5400 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 2579 pixels
Pixel pitch =   7.11  × 1000  = 2.76 µm
2579

XZ-1 pixel pitch

Sensor width = 7.85 mm
Sensor resolution width = 3647 pixels
Pixel pitch =   7.85  × 1000  = 2.15 µm
3647


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

5400 pixel area

Pixel pitch = 2.76 µm

Pixel area = 2.76² = 7.62 µm²

XZ-1 pixel area

Pixel pitch = 2.15 µm

Pixel area = 2.15² = 4.62 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

5400 pixel density

Sensor resolution width = 2579 pixels
Sensor width = 0.711 cm

Pixel density = (2579 / 0.711)² / 1000000 = 13.16 MP/cm²

XZ-1 pixel density

Sensor resolution width = 3647 pixels
Sensor width = 0.785 cm

Pixel density = (3647 / 0.785)² / 1000000 = 21.58 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

5400 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.00
r = 7.11/5.33 = 1.33
X =  5.00 × 1000000  = 1939
1.33
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939

Sensor resolution = 2579 x 1939

XZ-1 sensor resolution

Sensor width = 7.85 mm
Sensor height = 5.89 mm
Effective megapixels = 10.00
r = 7.85/5.89 = 1.33
X =  10.00 × 1000000  = 2742
1.33
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742

Sensor resolution = 3647 x 2742


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


5400 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

XZ-1 crop factor

Sensor diagonal in mm = 9.81 mm
Crop factor =   43.27  = 4.41
9.81

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

5400 equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f4.6

35-mm equivalent aperture = (f2.8 - f4.6) × 4.87 = f13.6 - f22.4

XZ-1 equivalent aperture

Crop factor = 4.41
Aperture = f1.8 - f2.5

35-mm equivalent aperture = (f1.8 - f2.5) × 4.41 = f7.9 - f11

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.