Nikon Coolpix 950 vs. Nikon Coolpix P1000
Comparison
change cameras » | |||||
|
vs |
|
|||
Nikon Coolpix 950 | Nikon Coolpix P1000 | ||||
check price » | check price » |
Megapixels
1.90
16.00
Max. image resolution
1600 x 1200
4608 x 3456
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.08 | : | 1 |
(ratio) | ||
Nikon Coolpix 950 | Nikon Coolpix P1000 |
Surface area:
30.72 mm² | vs | 28.46 mm² |
Difference: 2.26 mm² (8%)
950 sensor is approx. 1.08x bigger than P1000 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 19 years between Nikon 950 (1999) and
Nikon P1000 (2018).
Nineteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 14.44 µm² (802%)
A pixel on Nikon 950 sensor is approx. 802% bigger than a pixel on Nikon P1000.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Nikon 950
Nikon P1000
Total megapixels
2.10
16.79
Effective megapixels
1.90
16.00
Optical zoom
3x
125x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400
Auto, 100-6400
RAW
Manual focus
Normal focus range
10 cm
30 cm
Macro focus range
2 cm
1 cm
Focal length (35mm equiv.)
38 - 115 mm
24 - 3000 mm
Aperture priority
Yes
Yes
Max. aperture
f2.6 - f4
f2.8 - f8
Metering
Centre weighted, Matrix, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/750 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Electronic
White balance presets
6
5
Screen size
2"
3.2"
Screen resolution
130,000 dots
921,600 dots
Video capture
Max. video resolution
3840x2160 (30p/25p)
Storage types
CompactFlash type I
SD/SDHC/SDXC
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
EN-EL20a lithium-ion battery
Weight
350 g
1415 g
Dimensions
143 x 77 x 37 mm
146.3 x 118.8 x 181.3 mm
Year
1999
2018
Choose cameras to compare
Popular comparisons:
- Nikon Coolpix 950 vs. Nikon Coolpix 990
- Nikon Coolpix 950 vs. Nikon Coolpix 900
- Nikon Coolpix 950 vs. Nikon Coolpix 995
- Nikon Coolpix 950 vs. Nikon Coolpix P1000
- Nikon Coolpix 950 vs. Canon PowerShot G12
- Nikon Coolpix 950 vs. Nikon Coolpix P90
- Nikon Coolpix 950 vs. Nikon D7000
- Nikon Coolpix 950 vs. Nikon D80
- Nikon Coolpix 950 vs. Fujifilm FinePix AX245w
- Nikon Coolpix 950 vs. Canon PowerShot G15
- Nikon Coolpix 950 vs. Sony Cyber-shot DSC-HX50
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Nikon 950 diagonal
The diagonal of 950 sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Nikon P1000 diagonal
The diagonal of P1000 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
950 sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
P1000 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
950 pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1589 pixels
Sensor resolution width = 1589 pixels
Pixel pitch = | 6.40 | × 1000 | = 4.03 µm |
1589 |
P1000 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.34 µm |
4612 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
950 pixel area
Pixel pitch = 4.03 µm
Pixel area = 4.03² = 16.24 µm²
Pixel area = 4.03² = 16.24 µm²
P1000 pixel area
Pixel pitch = 1.34 µm
Pixel area = 1.34² = 1.8 µm²
Pixel area = 1.34² = 1.8 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
950 pixel density
Sensor resolution width = 1589 pixels
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
P1000 pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
950 sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.90
Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
Sensor height = 4.80 mm
Effective megapixels = 1.90
r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
P1000 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.62 mm
Effective megapixels = 16.00
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
950 crop factor
Sensor diagonal in mm = 8.00 mm
Crop factor = | 43.27 | = 5.41 |
8.00 |
P1000 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
950 equivalent aperture
Crop factor = 5.41
Aperture = f2.6 - f4
35-mm equivalent aperture = (f2.6 - f4) × 5.41 = f14.1 - f21.6
Aperture = f2.6 - f4
35-mm equivalent aperture = (f2.6 - f4) × 5.41 = f14.1 - f21.6
P1000 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f8
35-mm equivalent aperture = (f2.8 - f8) × 5.62 = f15.7 - f45
Aperture = f2.8 - f8
35-mm equivalent aperture = (f2.8 - f8) × 5.62 = f15.7 - f45
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.