Nikon Coolpix L110 vs. Nikon Coolpix L320
Comparison
change cameras » | |||||
|
vs |
|
|||
Nikon Coolpix L110 | Nikon Coolpix L320 | ||||
check price » | check price » |
Megapixels
12.20
16.10
Max. image resolution
4000 x 3000
4608 x 3456
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Nikon Coolpix L110 | Nikon Coolpix L320 |
Surface area:
28.46 mm² | vs | 28.46 mm² |
Difference: 0 mm² (0%)
L110 and L320 sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Nikon L110 (2010) and Nikon L320 (2013).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.57 µm² (32%)
A pixel on Nikon L110 sensor is approx. 32% bigger than a pixel on Nikon L320.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Nikon L110
Nikon L320
Total megapixels
12.40
16.44
Effective megapixels
12.20
16.10
Optical zoom
15x
26x
Digital zoom
Yes
Yes
ISO sensitivity
Auto
Auto, 80 - 1600
RAW
Manual focus
Normal focus range
60 cm
50 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
28 - 420 mm
22.5 - 585 mm
Aperture priority
No
No
Max. aperture
f3.5 - f5.4
f3.1 - f5.9
Metering
Multi, Center-weighted, Spot
Matrix, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
4 sec
Max. shutter speed
1/2000 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
Screen size
3"
3"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
1280x720 (30p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
4 x AA batteries (Alkaline, NiMH, or Lithium)
4 x AA batteries
Weight
406 g
430 g
Dimensions
109 x 74 x 78 mm
111.1 x 76.3 x 83.1 mm
Year
2010
2013
Choose cameras to compare
Popular comparisons:
- Nikon Coolpix L110 vs. Nikon Coolpix L310
- Nikon Coolpix L110 vs. Nikon Coolpix L330
- Nikon Coolpix L110 vs. Nikon Coolpix L810
- Nikon Coolpix L110 vs. Nikon Coolpix L320
- Nikon Coolpix L110 vs. Nikon Coolpix L820
- Nikon Coolpix L110 vs. Fujifilm FinePix S2980
- Nikon Coolpix L110 vs. Nikon Coolpix L120
- Nikon Coolpix L110 vs. Nikon Coolpix P510
- Nikon Coolpix L110 vs. Nikon Coolpix P520
- Nikon Coolpix L110 vs. Fujifilm FinePix S4000
- Nikon Coolpix L110 vs. Nikon Coolpix 5700
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Nikon L110 diagonal
The diagonal of L110 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Nikon L320 diagonal
The diagonal of L320 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
L110 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
L320 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
L110 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4029 pixels
Sensor resolution width = 4029 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.53 µm |
4029 |
L320 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4627 pixels
Sensor resolution width = 4627 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.33 µm |
4627 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
L110 pixel area
Pixel pitch = 1.53 µm
Pixel area = 1.53² = 2.34 µm²
Pixel area = 1.53² = 2.34 µm²
L320 pixel area
Pixel pitch = 1.33 µm
Pixel area = 1.33² = 1.77 µm²
Pixel area = 1.33² = 1.77 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
L110 pixel density
Sensor resolution width = 4029 pixels
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
L320 pixel density
Sensor resolution width = 4627 pixels
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4627 / 0.616)² / 1000000 = 56.42 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
L110 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.20
Resolution horizontal: X × r = 3029 × 1.33 = 4029
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
Sensor height = 4.62 mm
Effective megapixels = 12.20
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
L320 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.10
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Sensor height = 4.62 mm
Effective megapixels = 16.10
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
L110 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
L320 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
L110 equivalent aperture
Crop factor = 5.62
Aperture = f3.5 - f5.4
35-mm equivalent aperture = (f3.5 - f5.4) × 5.62 = f19.7 - f30.3
Aperture = f3.5 - f5.4
35-mm equivalent aperture = (f3.5 - f5.4) × 5.62 = f19.7 - f30.3
L320 equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.62 = f17.4 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.