Nikon Coolpix S610 vs. Fujifilm X-E1
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Nikon Coolpix S610 | Fujifilm X-E1 | ||||
| check price » | check price » | ||||
Megapixels
10.00
16.30
Max. image resolution
3648 x 2736
4896 x 3264
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
23.6 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 13.28 |
| (ratio) | ||
| Nikon Coolpix S610 | Fujifilm X-E1 | |
Surface area:
| 27.72 mm² | vs | 368.16 mm² |
Difference: 340.44 mm² (1228%)
X-E1 sensor is approx. 13.28x bigger than S610 sensor.
Note: You are comparing cameras of different generations.
There is a 4 year gap between Nikon S610 (2008) and Fujifilm X-E1 (2012).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 19.87 µm² (712%)
A pixel on Fujifilm X-E1 sensor is approx. 712% bigger than a pixel on Nikon S610.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Nikon S610
Fujifilm X-E1
Total megapixels
10.30
Effective megapixels
10.00
16.30
Optical zoom
4x
Digital zoom
Yes
No
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200
200, 250, 320, 400, 500, 640, 800, 1000, 1250, 1600, 2000, 2500, 3200, 4000, 5000, 6400 (100, 12800, 25600 with boost)
RAW
Manual focus
Normal focus range
50 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
28 - 112 mm
Aperture priority
No
Yes
Max. aperture
f2.7 - f5.8
Metering
256-segment Matrix, Centre weighted, Spot
Multi, Average, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
4 sec
30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
7
7
Screen size
3"
2.8"
Screen resolution
230,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion (EN-EL10)
Lithium-Ion NP-W126 rechargeable battery
Weight
177 g
350 g
Dimensions
94 x 57 x 23 mm
129 x 75 x 38 mm
Year
2008
2012
Choose cameras to compare
Popular comparisons:
- Nikon Coolpix S610 vs. Canon PowerShot ELPH 110 HS
- Nikon Coolpix S610 vs. Nikon Coolpix S70
- Nikon Coolpix S610 vs. Canon PowerShot SX60 HS
- Nikon Coolpix S610 vs. Nikon Coolpix S6500
- Nikon Coolpix S610 vs. Canon EOS M
- Nikon Coolpix S610 vs. Canon PowerShot SX200 IS
- Nikon Coolpix S610 vs. Nikon D90
- Nikon Coolpix S610 vs. Sony Cyber-shot DSC-HX300
- Nikon Coolpix S610 vs. Nikon Coolpix S700
- Nikon Coolpix S610 vs. Nikon Coolpix P900
- Nikon Coolpix S610 vs. Fujifilm X-E1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Nikon S610 diagonal
The diagonal of S610 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Fujifilm X-E1 diagonal
w = 23.60 mm
h = 15.60 mm
h = 15.60 mm
| Diagonal = √ | 23.60² + 15.60² | = 28.29 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
S610 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
X-E1 sensor area
Width = 23.60 mm
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Height = 15.60 mm
Surface area = 23.60 × 15.60 = 368.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
S610 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3647 pixels
Sensor resolution width = 3647 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.67 µm |
| 3647 |
X-E1 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 4962 pixels
Sensor resolution width = 4962 pixels
| Pixel pitch = | 23.60 | × 1000 | = 4.76 µm |
| 4962 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
S610 pixel area
Pixel pitch = 1.67 µm
Pixel area = 1.67² = 2.79 µm²
Pixel area = 1.67² = 2.79 µm²
X-E1 pixel area
Pixel pitch = 4.76 µm
Pixel area = 4.76² = 22.66 µm²
Pixel area = 4.76² = 22.66 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
S610 pixel density
Sensor resolution width = 3647 pixels
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3647 / 0.608)² / 1000000 = 35.98 MP/cm²
X-E1 pixel density
Sensor resolution width = 4962 pixels
Sensor width = 2.36 cm
Pixel density = (4962 / 2.36)² / 1000000 = 4.42 MP/cm²
Sensor width = 2.36 cm
Pixel density = (4962 / 2.36)² / 1000000 = 4.42 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
S610 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.00
Resolution horizontal: X × r = 2742 × 1.33 = 3647
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
Sensor height = 4.56 mm
Effective megapixels = 10.00
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2742
Sensor resolution = 3647 x 2742
X-E1 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.60 mm
Effective megapixels = 16.30
Resolution horizontal: X × r = 3286 × 1.51 = 4962
Resolution vertical: X = 3286
Sensor resolution = 4962 x 3286
Sensor height = 15.60 mm
Effective megapixels = 16.30
| r = 23.60/15.60 = 1.51 |
|
Resolution vertical: X = 3286
Sensor resolution = 4962 x 3286
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
S610 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
X-E1 crop factor
Sensor diagonal in mm = 28.29 mm
| Crop factor = | 43.27 | = 1.53 |
| 28.29 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
S610 equivalent aperture
Crop factor = 5.69
Aperture = f2.7 - f5.8
35-mm equivalent aperture = (f2.7 - f5.8) × 5.69 = f15.4 - f33
Aperture = f2.7 - f5.8
35-mm equivalent aperture = (f2.7 - f5.8) × 5.69 = f15.4 - f33
X-E1 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Fujifilm X-E1, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Fujifilm X-E1 is 1.53
Crop factor for Fujifilm X-E1 is 1.53
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.