Nikon E2n vs. Canon EOS 5D
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Nikon E2n | Canon EOS 5D | ||||
| check price » | check price » | ||||
Megapixels
1.40
12.70
Max. image resolution
1280 x 1000
4368 x 2912
Sensor
Sensor type
CCD
CMOS
Sensor size
2/3" (~ 8.8 x 6.6 mm)
35.8 x 23.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 14.67 |
| (ratio) | ||
| Nikon E2n | Canon EOS 5D | |
Surface area:
| 58.08 mm² | vs | 852.04 mm² |
Difference: 793.96 mm² (1367%)
5D sensor is approx. 14.67x bigger than E2n sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Nikon E2n (1997) and Canon 5D (2005).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 25.64 µm² (62%)
A pixel on Canon 5D sensor is approx. 62% bigger than a pixel on Nikon E2n.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Nikon E2n
Canon 5D
Total megapixels
13.30
Effective megapixels
12.70
Optical zoom
Digital zoom
No
No
ISO sensitivity
Auto, 800, 1600
Auto, 50 - 3200
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Centre weighted, Matrix, Spot
Centre weighted, Matrix, Multi-segment, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
1/2 sec
30 sec
Max. shutter speed
1/2000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (pentaprism)
White balance presets
7
6
Screen size
2.5"
Screen resolution
230,000 dots
Video capture
Max. video resolution
Storage types
CompactFlash type I, CompactFlash type II, Microdrive
USB
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
NiMH accu
Lithium-Ion BP-511A rechargeable battery
Weight
895 g
Dimensions
164 x 140 x 120 mm
152 x 113 x 75 mm
Year
1997
2005
Choose cameras to compare
Popular comparisons:
- Nikon E2n vs. Nikon D3100
- Nikon E2n vs. Canon EOS 5D
- Nikon E2n vs. Nikon D50
- Nikon E2n vs. Nikon D700
- Nikon E2n vs. Nikon Coolpix L330
- Nikon E2n vs. Canon EOS 60D
- Nikon E2n vs. Canon EOS Rebel SL1
- Nikon E2n vs. Samsung WB150F
- Nikon E2n vs. Samsung NX mini
- Nikon E2n vs. Nikon D5200
- Nikon E2n vs. Canon EOS-1D X
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Nikon E2n diagonal
The diagonal of E2n sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
| Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Canon 5D diagonal
w = 35.80 mm
h = 23.80 mm
h = 23.80 mm
| Diagonal = √ | 35.80² + 23.80² | = 42.99 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
E2n sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
5D sensor area
Width = 35.80 mm
Height = 23.80 mm
Surface area = 35.80 × 23.80 = 852.04 mm²
Height = 23.80 mm
Surface area = 35.80 × 23.80 = 852.04 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
E2n pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 1365 pixels
Sensor resolution width = 1365 pixels
| Pixel pitch = | 8.80 | × 1000 | = 6.45 µm |
| 1365 |
5D pixel pitch
Sensor width = 35.80 mm
Sensor resolution width = 4365 pixels
Sensor resolution width = 4365 pixels
| Pixel pitch = | 35.80 | × 1000 | = 8.2 µm |
| 4365 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
E2n pixel area
Pixel pitch = 6.45 µm
Pixel area = 6.45² = 41.6 µm²
Pixel area = 6.45² = 41.6 µm²
5D pixel area
Pixel pitch = 8.2 µm
Pixel area = 8.2² = 67.24 µm²
Pixel area = 8.2² = 67.24 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
E2n pixel density
Sensor resolution width = 1365 pixels
Sensor width = 0.88 cm
Pixel density = (1365 / 0.88)² / 1000000 = 2.41 MP/cm²
Sensor width = 0.88 cm
Pixel density = (1365 / 0.88)² / 1000000 = 2.41 MP/cm²
5D pixel density
Sensor resolution width = 4365 pixels
Sensor width = 3.58 cm
Pixel density = (4365 / 3.58)² / 1000000 = 1.49 MP/cm²
Sensor width = 3.58 cm
Pixel density = (4365 / 3.58)² / 1000000 = 1.49 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
E2n sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 1.40
Resolution horizontal: X × r = 1026 × 1.33 = 1365
Resolution vertical: X = 1026
Sensor resolution = 1365 x 1026
Sensor height = 6.60 mm
Effective megapixels = 1.40
| r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 1026
Sensor resolution = 1365 x 1026
5D sensor resolution
Sensor width = 35.80 mm
Sensor height = 23.80 mm
Effective megapixels = 12.70
Resolution horizontal: X × r = 2910 × 1.5 = 4365
Resolution vertical: X = 2910
Sensor resolution = 4365 x 2910
Sensor height = 23.80 mm
Effective megapixels = 12.70
| r = 35.80/23.80 = 1.5 |
|
Resolution vertical: X = 2910
Sensor resolution = 4365 x 2910
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
E2n crop factor
Sensor diagonal in mm = 11.00 mm
| Crop factor = | 43.27 | = 3.93 |
| 11.00 |
5D crop factor
Sensor diagonal in mm = 42.99 mm
| Crop factor = | 43.27 | = 1.01 |
| 42.99 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
E2n equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Nikon E2n, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Nikon E2n is 3.93
Crop factor for Nikon E2n is 3.93
5D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 5D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 5D is 1.01
Crop factor for Canon 5D is 1.01
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.