Olympus C-1000L vs. Canon EOS R6
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Olympus C-1000L | Canon EOS R6 | ||||
| check price » | check price » | ||||
Megapixels
0.85
20.10
Max. image resolution
1024 x 768
5472 x 3648
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2" (~ 6.4 x 4.8 mm)
35.9 x 23.9 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 27.93 |
| (ratio) | ||
| Olympus C-1000L | Canon EOS R6 | |
Surface area:
| 30.72 mm² | vs | 858.01 mm² |
Difference: 827.29 mm² (2693%)
R6 sensor is approx. 27.93x bigger than C-1000L sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 22 years between Olympus C-1000L (1998) and
Canon R6 (2020).
22 years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 6.53 µm² (18%)
A pixel on Canon R6 sensor is approx. 18% bigger than a pixel on Olympus C-1000L.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus C-1000L
Canon R6
Total megapixels
21.40
Effective megapixels
20.10
Optical zoom
Yes
Digital zoom
Yes
ISO sensitivity
180
Auto, 100-102400 (extends to 50-204800)
RAW
Manual focus
Normal focus range
60 cm
Macro focus range
30 cm
Focal length (35mm equiv.)
50 - 150 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f3.9
Metering
Centre weighted, Spot
Multi, Center-weighted, Spot, Partial
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/4 sec
30 sec
Max. shutter speed
1/10000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Optical
Electronic
White balance presets
5
8
Screen size
1.8"
3"
Screen resolution
61,000 dots
1,620,000 dots
Video capture
Max. video resolution
3840x2160 (60p/30p/23.98p)
Storage types
SmartMedia
SD/SDHC/SDXC/UHS-II
USB
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
4x AA
LP-E6NH lithium-ion battery
Weight
560 g
680 g
Dimensions
115 x 77 x 130 mm
138.4 x 97.5 x 88.4 mm
Year
1998
2020
Choose cameras to compare
Popular comparisons:
- Olympus C-1000L vs. Olympus C-100
- Olympus C-1000L vs. Olympus D-500L
- Olympus C-1000L vs. Canon EOS 7D
- Olympus C-1000L vs. Sony Alpha a5000
- Olympus C-1000L vs. Sony Cyber-shot DSC-RX100
- Olympus C-1000L vs. Canon EOS R6
- Olympus C-1000L vs. Minolta DiMAGE 7i
- Olympus C-1000L vs. Olympus C-1400L
- Olympus C-1000L vs. Olympus C-765 UZ
- Olympus C-1000L vs. Panasonic Lumix DMC-LX3
- Olympus C-1000L vs. Olympus SP-565UZ
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Olympus C-1000L diagonal
The diagonal of C-1000L sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Canon R6 diagonal
w = 35.90 mm
h = 23.90 mm
h = 23.90 mm
| Diagonal = √ | 35.90² + 23.90² | = 43.13 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
C-1000L sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
R6 sensor area
Width = 35.90 mm
Height = 23.90 mm
Surface area = 35.90 × 23.90 = 858.01 mm²
Height = 23.90 mm
Surface area = 35.90 × 23.90 = 858.01 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
C-1000L pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1063 pixels
Sensor resolution width = 1063 pixels
| Pixel pitch = | 6.40 | × 1000 | = 6.02 µm |
| 1063 |
R6 pixel pitch
Sensor width = 35.90 mm
Sensor resolution width = 5492 pixels
Sensor resolution width = 5492 pixels
| Pixel pitch = | 35.90 | × 1000 | = 6.54 µm |
| 5492 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
C-1000L pixel area
Pixel pitch = 6.02 µm
Pixel area = 6.02² = 36.24 µm²
Pixel area = 6.02² = 36.24 µm²
R6 pixel area
Pixel pitch = 6.54 µm
Pixel area = 6.54² = 42.77 µm²
Pixel area = 6.54² = 42.77 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
C-1000L pixel density
Sensor resolution width = 1063 pixels
Sensor width = 0.64 cm
Pixel density = (1063 / 0.64)² / 1000000 = 2.76 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1063 / 0.64)² / 1000000 = 2.76 MP/cm²
R6 pixel density
Sensor resolution width = 5492 pixels
Sensor width = 3.59 cm
Pixel density = (5492 / 3.59)² / 1000000 = 2.34 MP/cm²
Sensor width = 3.59 cm
Pixel density = (5492 / 3.59)² / 1000000 = 2.34 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
C-1000L sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 0.85
Resolution horizontal: X × r = 799 × 1.33 = 1063
Resolution vertical: X = 799
Sensor resolution = 1063 x 799
Sensor height = 4.80 mm
Effective megapixels = 0.85
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 799
Sensor resolution = 1063 x 799
R6 sensor resolution
Sensor width = 35.90 mm
Sensor height = 23.90 mm
Effective megapixels = 20.10
Resolution horizontal: X × r = 3661 × 1.5 = 5492
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Sensor height = 23.90 mm
Effective megapixels = 20.10
| r = 35.90/23.90 = 1.5 |
|
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
C-1000L crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
R6 crop factor
Sensor diagonal in mm = 43.13 mm
| Crop factor = | 43.27 | = 1 |
| 43.13 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
C-1000L equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f3.9
35-mm equivalent aperture = (f2.8 - f3.9) × 5.41 = f15.1 - f21.1
Aperture = f2.8 - f3.9
35-mm equivalent aperture = (f2.8 - f3.9) × 5.41 = f15.1 - f21.1
R6 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon R6, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Canon R6 is 1, the equivalent aperture is aperture.
Since crop factor for Canon R6 is 1, the equivalent aperture is aperture.
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.