Olympus C-120 vs. Sony Cyber-shot DSC-P30
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Olympus C-120 | Sony Cyber-shot DSC-P30 | ||||
| check price » | check price » | ||||
Megapixels
2.11
1.30
Max. image resolution
1600 x 1200
1280 x 960
Sensor
Sensor type
CCD
CCD
Sensor size
1/3.2" (~ 4.5 x 3.37 mm)
1/2.7" (~ 5.33 x 4 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.41 |
| (ratio) | ||
| Olympus C-120 | Sony Cyber-shot DSC-P30 | |
Surface area:
| 15.17 mm² | vs | 21.32 mm² |
Difference: 6.15 mm² (41%)
P30 sensor is approx. 1.41x bigger than C-120 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 9.22 µm² (128%)
A pixel on Sony P30 sensor is approx. 128% bigger than a pixel on Olympus C-120.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus C-120
Sony P30
Total megapixels
Effective megapixels
Optical zoom
No
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, (100-400)
100, 200, 400
RAW
Manual focus
Normal focus range
60 cm
50 cm
Macro focus range
25 cm
3 cm
Focal length (35mm equiv.)
35 mm
41 - 123 mm
Aperture priority
No
No
Max. aperture
f4
f3.8
Metering
ESP Digital, Spot
Centre weighted, Spot
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
8 sec
Max. shutter speed
1/1000 sec
1/725 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
6
4
Screen size
1.6"
1.5"
Screen resolution
61,000 dots
123,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
Memory Stick
USB
USB 1.1
USB 1.0
HDMI
Wireless
GPS
Battery
2x CR-V3, 4x AA
AA (2) batteries (NiMH recommended)
Weight
302 g
250 g
Dimensions
123 x 65 x 45 mm
143 x 103 x 79 mm
Year
2002
2001
Choose cameras to compare
Popular comparisons:
- Olympus C-120 vs. Sony a7C
- Olympus C-120 vs. Olympus PEN E-PL5
- Olympus C-120 vs. Olympus C-1400L
- Olympus C-120 vs. Sony Cyber-shot DSC-W690
- Olympus C-120 vs. Canon PowerShot SX150 IS
- Olympus C-120 vs. Kodak EasyShare CX6200
- Olympus C-120 vs. Sony Cyber-shot DSC-P30
- Olympus C-120 vs. Rollei dr 5100
- Olympus C-120 vs. Olympus C-220 Zoom
- Olympus C-120 vs. Olympus C-5050 Zoom
- Canon EOS 200D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Olympus C-120 diagonal
The diagonal of C-120 sensor is not 1/3.2 or 0.31" (7.9 mm) as you might expect, but approximately two thirds of
that value - 5.62 mm. If you want to know why, see
sensor sizes.
w = 4.50 mm
h = 3.37 mm
w = 4.50 mm
h = 3.37 mm
| Diagonal = √ | 4.50² + 3.37² | = 5.62 mm |
Sony P30 diagonal
The diagonal of P30 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of
that value - 6.66 mm. If you want to know why, see
sensor sizes.
w = 5.33 mm
h = 4.00 mm
w = 5.33 mm
h = 4.00 mm
| Diagonal = √ | 5.33² + 4.00² | = 6.66 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
C-120 sensor area
Width = 4.50 mm
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
P30 sensor area
Width = 5.33 mm
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Height = 4.00 mm
Surface area = 5.33 × 4.00 = 21.32 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
C-120 pixel pitch
Sensor width = 4.50 mm
Sensor resolution width = 1682 pixels
Sensor resolution width = 1682 pixels
| Pixel pitch = | 4.50 | × 1000 | = 2.68 µm |
| 1682 |
P30 pixel pitch
Sensor width = 5.33 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
| Pixel pitch = | 5.33 | × 1000 | = 4.05 µm |
| 1315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
C-120 pixel area
Pixel pitch = 2.68 µm
Pixel area = 2.68² = 7.18 µm²
Pixel area = 2.68² = 7.18 µm²
P30 pixel area
Pixel pitch = 4.05 µm
Pixel area = 4.05² = 16.4 µm²
Pixel area = 4.05² = 16.4 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
C-120 pixel density
Sensor resolution width = 1682 pixels
Sensor width = 0.45 cm
Pixel density = (1682 / 0.45)² / 1000000 = 13.97 MP/cm²
Sensor width = 0.45 cm
Pixel density = (1682 / 0.45)² / 1000000 = 13.97 MP/cm²
P30 pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.533 cm
Pixel density = (1315 / 0.533)² / 1000000 = 6.09 MP/cm²
Sensor width = 0.533 cm
Pixel density = (1315 / 0.533)² / 1000000 = 6.09 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
C-120 sensor resolution
Sensor width = 4.50 mm
Sensor height = 3.37 mm
Effective megapixels = 2.11
Resolution horizontal: X × r = 1255 × 1.34 = 1682
Resolution vertical: X = 1255
Sensor resolution = 1682 x 1255
Sensor height = 3.37 mm
Effective megapixels = 2.11
| r = 4.50/3.37 = 1.34 |
|
Resolution vertical: X = 1255
Sensor resolution = 1682 x 1255
P30 sensor resolution
Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.00 mm
Effective megapixels = 1.30
| r = 5.33/4.00 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
C-120 crop factor
Sensor diagonal in mm = 5.62 mm
| Crop factor = | 43.27 | = 7.7 |
| 5.62 |
P30 crop factor
Sensor diagonal in mm = 6.66 mm
| Crop factor = | 43.27 | = 6.5 |
| 6.66 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
C-120 equivalent aperture
Crop factor = 7.7
Aperture = f4
35-mm equivalent aperture = (f4) × 7.7 = f30.8
Aperture = f4
35-mm equivalent aperture = (f4) × 7.7 = f30.8
P30 equivalent aperture
Crop factor = 6.5
Aperture = f3.8
35-mm equivalent aperture = (f3.8) × 6.5 = f24.7
Aperture = f3.8
35-mm equivalent aperture = (f3.8) × 6.5 = f24.7
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.