Olympus C-2100 UZ vs. Panasonic Lumix DMC-FX37
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Olympus C-2100 UZ | Panasonic Lumix DMC-FX37 | ||||
| check price » | check price » | ||||
Megapixels
1.90
10.10
Max. image resolution
1600 x 1200
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.11 | : | 1 |
| (ratio) | ||
| Olympus C-2100 UZ | Panasonic Lumix DMC-FX37 | |
Surface area:
| 30.72 mm² | vs | 27.72 mm² |
Difference: 3 mm² (11%)
C-2100 UZ sensor is approx. 1.11x bigger than FX37 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 8 years between Olympus C-2100 UZ (2000) and Panasonic FX37 (2008).
Eight years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 13.48 µm² (488%)
A pixel on Olympus C-2100 UZ sensor is approx. 488% bigger than a pixel on Panasonic FX37.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus C-2100 UZ
Panasonic FX37
Total megapixels
2.10
10.70
Effective megapixels
1.90
10.10
Optical zoom
10x
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
Auto, 100, 200, 400, 800, 1600 - 6400
RAW
Manual focus
Normal focus range
60 cm
50 cm
Macro focus range
10 cm
5 cm
Focal length (35mm equiv.)
38 - 380 mm
25 - 125 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f3.5
f2.8 - f5.9
Metering
Centre weighted, Spot
Intelligent Multiple
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
16 sec
60 sec
Max. shutter speed
1/800 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
None
White balance presets
5
6
Screen size
1.8"
2.5"
Screen resolution
114,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
MultiMedia, SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Lithium-Ion rechargeable
Weight
635 g
125 g
Dimensions
113 x 78 x 141 mm
94.7 x 51.9 x 22.0 mm
Year
2000
2008
Choose cameras to compare
Popular comparisons:
- Olympus C-2100 UZ vs. Olympus OM-D E-M5
- Olympus C-2100 UZ vs. Olympus C-3020 Zoom
- Olympus C-2100 UZ vs. Olympus E-10
- Olympus C-2100 UZ vs. Panasonic Lumix DMC-FX37
- Olympus C-2100 UZ vs. Olympus SP 800 UZ
- Olympus C-2100 UZ vs. Canon EOS 5DS R
- Olympus C-2100 UZ vs. Olympus C-8080 Wide Zoom
- Olympus C-2100 UZ vs. Panasonic Lumix DMC-LX7
- Olympus C-2100 UZ vs. Fujifilm X20
- Olympus C-2100 UZ vs. Olympus SP 600 UZ
- Olympus C-2100 UZ vs. Olympus SP 810 UZ
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Olympus C-2100 UZ diagonal
The diagonal of C-2100 UZ sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Panasonic FX37 diagonal
The diagonal of FX37 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
| Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
C-2100 UZ sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
FX37 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
C-2100 UZ pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1589 pixels
Sensor resolution width = 1589 pixels
| Pixel pitch = | 6.40 | × 1000 | = 4.03 µm |
| 1589 |
FX37 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3665 pixels
Sensor resolution width = 3665 pixels
| Pixel pitch = | 6.08 | × 1000 | = 1.66 µm |
| 3665 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
C-2100 UZ pixel area
Pixel pitch = 4.03 µm
Pixel area = 4.03² = 16.24 µm²
Pixel area = 4.03² = 16.24 µm²
FX37 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
C-2100 UZ pixel density
Sensor resolution width = 1589 pixels
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1589 / 0.64)² / 1000000 = 6.16 MP/cm²
FX37 pixel density
Sensor resolution width = 3665 pixels
Sensor width = 0.608 cm
Pixel density = (3665 / 0.608)² / 1000000 = 36.34 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3665 / 0.608)² / 1000000 = 36.34 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
C-2100 UZ sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.90
Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
Sensor height = 4.80 mm
Effective megapixels = 1.90
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1195
Sensor resolution = 1589 x 1195
FX37 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2756 × 1.33 = 3665
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
Sensor height = 4.56 mm
Effective megapixels = 10.10
| r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
C-2100 UZ crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
FX37 crop factor
Sensor diagonal in mm = 7.60 mm
| Crop factor = | 43.27 | = 5.69 |
| 7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
C-2100 UZ equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 5.41 = f15.1 - f18.9
Aperture = f2.8 - f3.5
35-mm equivalent aperture = (f2.8 - f3.5) × 5.41 = f15.1 - f18.9
FX37 equivalent aperture
Crop factor = 5.69
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.69 = f15.9 - f33.6
Aperture = f2.8 - f5.9
35-mm equivalent aperture = (f2.8 - f5.9) × 5.69 = f15.9 - f33.6
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.