Olympus C-990 Zoom vs. Nikon Coolpix 880

Comparison

change cameras »
C-990 Zoom image
vs
Coolpix 880 image
Olympus C-990 Zoom Nikon Coolpix 880
check price » check price »
Megapixels
2.10
3.10
Max. image resolution
1600 x 1200
2048 x 1536

Sensor

Sensor type
CCD
CCD
Sensor size
1/2.7" (~ 5.33 x 4 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor resolution
1672 x 1257
2031 x 1527
Diagonal
6.66 mm
8.89 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1.78
(ratio)
Olympus C-990 Zoom Nikon Coolpix 880
Surface area:
21.32 mm² vs 37.90 mm²
Difference: 16.58 mm² (78%)
880 sensor is approx. 1.78x bigger than C-990 Zoom sensor.
Pixel pitch
3.19 µm
3.5 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.31 µm (10%)
Pixel pitch of 880 is approx. 10% higher than pixel pitch of C-990 Zoom.
Pixel area
10.18 µm²
12.25 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.07 µm² (20%)
A pixel on Nikon 880 sensor is approx. 20% bigger than a pixel on Olympus C-990 Zoom.
Pixel density
9.84 MP/cm²
8.16 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 1.68 µm (21%)
Olympus C-990 Zoom has approx. 21% higher pixel density than Nikon 880.
To learn about the accuracy of these numbers, click here.



Specs

Olympus C-990 Zoom
Nikon 880
Crop factor
6.5
4.87
Total megapixels
3.30
Effective megapixels
3.10
Optical zoom
Yes
2.5x
Digital zoom
Yes
Yes
ISO sensitivity
100, 200, 400
Auto, 100, 200, 400
RAW
Manual focus
Normal focus range
80 cm
40 cm
Macro focus range
20 cm
4 cm
Focal length (35mm equiv.)
35 - 105 mm
38 - 95 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.4
f2.8 - f4.2
Max. aperture (35mm equiv.)
f18.2 - f28.6
f13.6 - f20.5
Metering
Centre weighted
256-segment Matrix, Centre weighted, Spot, Spot-AF
Exposure compensation
±2 EV (in 1/2 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
60 sec
Max. shutter speed
1/1000 sec
1/1000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
5
6
Screen size
1.8"
1.8"
Screen resolution
61,000 dots
110,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
CompactFlash type I
USB
USB 1.0
HDMI
Wireless
GPS
Battery
2x CR-V3, 4x AA
1 x 2CR5 battery (or optional Nikon rechargeable)
Weight
380 g
325 g
Dimensions
127 x 67 x 53 mm
100 x 75 x 53 mm
Year
2000
2000




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Olympus C-990 Zoom diagonal

The diagonal of C-990 Zoom sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm
Diagonal =  5.33² + 4.00²   = 6.66 mm

Nikon 880 diagonal

The diagonal of 880 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

C-990 Zoom sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

880 sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

C-990 Zoom pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 1672 pixels
Pixel pitch =   5.33  × 1000  = 3.19 µm
1672

880 pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 2031 pixels
Pixel pitch =   7.11  × 1000  = 3.5 µm
2031


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

C-990 Zoom pixel area

Pixel pitch = 3.19 µm

Pixel area = 3.19² = 10.18 µm²

880 pixel area

Pixel pitch = 3.5 µm

Pixel area = 3.5² = 12.25 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

C-990 Zoom pixel density

Sensor resolution width = 1672 pixels
Sensor width = 0.533 cm

Pixel density = (1672 / 0.533)² / 1000000 = 9.84 MP/cm²

880 pixel density

Sensor resolution width = 2031 pixels
Sensor width = 0.711 cm

Pixel density = (2031 / 0.711)² / 1000000 = 8.16 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

C-990 Zoom sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 2.10
r = 5.33/4.00 = 1.33
X =  2.10 × 1000000  = 1257
1.33
Resolution horizontal: X × r = 1257 × 1.33 = 1672
Resolution vertical: X = 1257

Sensor resolution = 1672 x 1257

880 sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.10
r = 7.11/5.33 = 1.33
X =  3.10 × 1000000  = 1527
1.33
Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527

Sensor resolution = 2031 x 1527


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


C-990 Zoom crop factor

Sensor diagonal in mm = 6.66 mm
Crop factor =   43.27  = 6.5
6.66

880 crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

C-990 Zoom equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f4.4

35-mm equivalent aperture = (f2.8 - f4.4) × 6.5 = f18.2 - f28.6

880 equivalent aperture

Crop factor = 4.87
Aperture = f2.8 - f4.2

35-mm equivalent aperture = (f2.8 - f4.2) × 4.87 = f13.6 - f20.5

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.