Olympus D-200L vs. Samsung Digimax 101
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Olympus D-200L | Samsung Digimax 101 | ||||
| check price » | check price » | ||||
Megapixels
0.30
1.30
Max. image resolution
640 x 480
1280 x 960
Sensor
Sensor type
CCD
CMOS
Sensor size
2/3" (~ 8.8 x 6.6 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.89 | : | 1 |
| (ratio) | ||
| Olympus D-200L | Samsung Digimax 101 | |
Surface area:
| 58.08 mm² | vs | 30.72 mm² |
Difference: 27.36 mm² (89%)
D-200L sensor is approx. 1.89x bigger than 101 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 6 years between Olympus D-200L (1996) and Samsung 101 (2002).
Six years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 170.05 µm² (717%)
A pixel on Olympus D-200L sensor is approx. 717% bigger than a pixel on Samsung 101.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus D-200L
Samsung 101
Total megapixels
0.30
Effective megapixels
0.30
Optical zoom
1x
No
Digital zoom
No
Yes
ISO sensitivity
130
Auto
RAW
Manual focus
Normal focus range
75 cm
100 cm
Macro focus range
20 cm
Focal length (35mm equiv.)
36 mm
35 mm
Aperture priority
No
No
Max. aperture
f2.8 - f11.0
f3
Metering
Multi, Center-weighted, Spot
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
1/15 sec
Max. shutter speed
1/10000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical
White balance presets
6
6
Screen size
1.8"
1.6"
Screen resolution
114,000 dots
Video capture
Max. video resolution
Storage types
Internal
MultiMedia, Secure Digital
USB
USB 1.0
USB 1.1
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
1x CR-V3, 2x AA
Weight
320 g
125 g
Dimensions
145 x 71 x 45 mm
108 x 56 x 37 mm
Year
1996
2002
Choose cameras to compare
Popular comparisons:
- Olympus D-200L vs. Olympus D-300L
- Olympus D-200L vs. Ricoh Caplio RR1
- Olympus D-200L vs. Ricoh RDC-4300
- Olympus D-200L vs. Samsung PL50
- Olympus D-200L vs. Ricoh RDC-7
- Olympus D-200L vs. Ricoh Caplio R4
- Olympus D-200L vs. Samsung Digimax A7
- Olympus D-200L vs. Samsung Digimax 101
- Olympus D-200L vs. Pentax EI-200
- Olympus D-200L vs. Samsung NV24HD
- Olympus D-200L vs. Olympus Stylus Verve
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Olympus D-200L diagonal
The diagonal of D-200L sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of
that value - 11 mm. If you want to know why, see
sensor sizes.
w = 8.80 mm
h = 6.60 mm
w = 8.80 mm
h = 6.60 mm
| Diagonal = √ | 8.80² + 6.60² | = 11.00 mm |
Samsung 101 diagonal
The diagonal of 101 sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
D-200L sensor area
Width = 8.80 mm
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
Height = 6.60 mm
Surface area = 8.80 × 6.60 = 58.08 mm²
101 sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
D-200L pixel pitch
Sensor width = 8.80 mm
Sensor resolution width = 632 pixels
Sensor resolution width = 632 pixels
| Pixel pitch = | 8.80 | × 1000 | = 13.92 µm |
| 632 |
101 pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1315 pixels
Sensor resolution width = 1315 pixels
| Pixel pitch = | 6.40 | × 1000 | = 4.87 µm |
| 1315 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
D-200L pixel area
Pixel pitch = 13.92 µm
Pixel area = 13.92² = 193.77 µm²
Pixel area = 13.92² = 193.77 µm²
101 pixel area
Pixel pitch = 4.87 µm
Pixel area = 4.87² = 23.72 µm²
Pixel area = 4.87² = 23.72 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
D-200L pixel density
Sensor resolution width = 632 pixels
Sensor width = 0.88 cm
Pixel density = (632 / 0.88)² / 1000000 = 0.52 MP/cm²
Sensor width = 0.88 cm
Pixel density = (632 / 0.88)² / 1000000 = 0.52 MP/cm²
101 pixel density
Sensor resolution width = 1315 pixels
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1315 / 0.64)² / 1000000 = 4.22 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
D-200L sensor resolution
Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 0.30
Resolution horizontal: X × r = 475 × 1.33 = 632
Resolution vertical: X = 475
Sensor resolution = 632 x 475
Sensor height = 6.60 mm
Effective megapixels = 0.30
| r = 8.80/6.60 = 1.33 |
|
Resolution vertical: X = 475
Sensor resolution = 632 x 475
101 sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.30
Resolution horizontal: X × r = 989 × 1.33 = 1315
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Sensor height = 4.80 mm
Effective megapixels = 1.30
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 989
Sensor resolution = 1315 x 989
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
D-200L crop factor
Sensor diagonal in mm = 11.00 mm
| Crop factor = | 43.27 | = 3.93 |
| 11.00 |
101 crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
D-200L equivalent aperture
Crop factor = 3.93
Aperture = f2.8 - f11.0
35-mm equivalent aperture = (f2.8 - f11.0) × 3.93 = f11 - f43.2
Aperture = f2.8 - f11.0
35-mm equivalent aperture = (f2.8 - f11.0) × 3.93 = f11 - f43.2
101 equivalent aperture
Crop factor = 5.41
Aperture = f3
35-mm equivalent aperture = (f3) × 5.41 = f16.2
Aperture = f3
35-mm equivalent aperture = (f3) × 5.41 = f16.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.