Olympus D-340L vs. Kodak EasyShare V610

Comparison

change cameras »
D-340L image
vs
EasyShare V610 image
Olympus D-340L Kodak EasyShare V610
check price » check price »
Megapixels
1.20
6.00
Max. image resolution
1280 x 960
2832 x 2128

Sensor

Sensor type
CCD
CCD
Sensor size
2/3" (~ 8.8 x 6.6 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor resolution
1264 x 950
2825 x 2124
Diagonal
11.00 mm
7.19 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
2.34 : 1
(ratio)
Olympus D-340L Kodak EasyShare V610
Surface area:
58.08 mm² vs 24.84 mm²
Difference: 33.24 mm² (134%)
D-340L sensor is approx. 2.34x bigger than V610 sensor.
Note: You are comparing sensors of very different generations. There is a gap of 8 years between Olympus D-340L (1998) and Kodak V610 (2006). Eight years is a lot of time in terms of technology, meaning newer sensors are overall much more efficient than the older ones.
Pixel pitch
6.96 µm
2.04 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 4.92 µm (241%)
Pixel pitch of D-340L is approx. 241% higher than pixel pitch of V610.
Pixel area
48.44 µm²
4.16 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 44.28 µm² (1064%)
A pixel on Olympus D-340L sensor is approx. 1064% bigger than a pixel on Kodak V610.
Pixel density
2.06 MP/cm²
24.14 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 22.08 µm (1072%)
Kodak V610 has approx. 1072% higher pixel density than Olympus D-340L.
To learn about the accuracy of these numbers, click here.



Specs

Olympus D-340L
Kodak V610
Crop factor
3.93
6.02
Total megapixels
1.30
6.30
Effective megapixels
1.20
6.00
Optical zoom
1x
10x
Digital zoom
Yes
Yes
ISO sensitivity
60, 120
Auto, 64, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
70 cm
60 cm
Macro focus range
10 cm
5 cm
Focal length (35mm equiv.)
36 mm
38 - 380 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.6
f3.9 - f4.8
Max. aperture (35mm equiv.)
f11 - f22
f23.5 - f28.9
Metering
Multi, Center-weighted, Spot
Centre weighted, Multi-pattern, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
8 sec
Max. shutter speed
1/500 sec
1/1200 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
None
White balance presets
6
5
Screen size
2"
2.8"
Screen resolution
114,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SmartMedia
Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (4) batteries (NiMH recommended)
Kodak Lithium-Ion, dock
Weight
320 g
160 g
Dimensions
128 x 65 x 45 mm
111 x 55.5 x 23.2 mm
Year
1998
2006




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Olympus D-340L diagonal

The diagonal of D-340L sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of that value - 11 mm. If you want to know why, see sensor sizes.

w = 8.80 mm
h = 6.60 mm
Diagonal =  8.80² + 6.60²   = 11.00 mm

Kodak V610 diagonal

The diagonal of V610 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm
Diagonal =  5.75² + 4.32²   = 7.19 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

D-340L sensor area

Width = 8.80 mm
Height = 6.60 mm

Surface area = 8.80 × 6.60 = 58.08 mm²

V610 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

D-340L pixel pitch

Sensor width = 8.80 mm
Sensor resolution width = 1264 pixels
Pixel pitch =   8.80  × 1000  = 6.96 µm
1264

V610 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 2825 pixels
Pixel pitch =   5.75  × 1000  = 2.04 µm
2825


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

D-340L pixel area

Pixel pitch = 6.96 µm

Pixel area = 6.96² = 48.44 µm²

V610 pixel area

Pixel pitch = 2.04 µm

Pixel area = 2.04² = 4.16 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

D-340L pixel density

Sensor resolution width = 1264 pixels
Sensor width = 0.88 cm

Pixel density = (1264 / 0.88)² / 1000000 = 2.06 MP/cm²

V610 pixel density

Sensor resolution width = 2825 pixels
Sensor width = 0.575 cm

Pixel density = (2825 / 0.575)² / 1000000 = 24.14 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

D-340L sensor resolution

Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 1.20
r = 8.80/6.60 = 1.33
X =  1.20 × 1000000  = 950
1.33
Resolution horizontal: X × r = 950 × 1.33 = 1264
Resolution vertical: X = 950

Sensor resolution = 1264 x 950

V610 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 6.00
r = 5.75/4.32 = 1.33
X =  6.00 × 1000000  = 2124
1.33
Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124

Sensor resolution = 2825 x 2124


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


D-340L crop factor

Sensor diagonal in mm = 11.00 mm
Crop factor =   43.27  = 3.93
11.00

V610 crop factor

Sensor diagonal in mm = 7.19 mm
Crop factor =   43.27  = 6.02
7.19

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

D-340L equivalent aperture

Crop factor = 3.93
Aperture = f2.8 - f5.6

35-mm equivalent aperture = (f2.8 - f5.6) × 3.93 = f11 - f22

V610 equivalent aperture

Crop factor = 6.02
Aperture = f3.9 - f4.8

35-mm equivalent aperture = (f3.9 - f4.8) × 6.02 = f23.5 - f28.9

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.