Olympus FE-230 vs. Praktica Dpix 1000z
Comparison
change cameras » | |||||
|
vs |
|
|||
Olympus FE-230 | Praktica Dpix 1000z | ||||
check price » | check price » |
Megapixels
7.10
10.20
Max. image resolution
3072 x 2304
3648 x 2736
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.15 |
(ratio) | ||
Olympus FE-230 | Praktica Dpix 1000z |
Surface area:
24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
Dpix 1000z sensor is approx. 1.15x bigger than FE-230 sensor.
Note: You are comparing cameras of different generations.
There is a 2 year gap between Olympus FE-230 (2007) and Praktica Dpix 1000z (2009).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.71 µm² (25%)
A pixel on Olympus FE-230 sensor is approx. 25% bigger than a pixel on Praktica Dpix 1000z.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Olympus FE-230
Praktica Dpix 1000z
Total megapixels
7.40
Effective megapixels
7.10
Optical zoom
3x
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50 - 1250
Auto, 80, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
60 cm
60 cm
Macro focus range
5 cm
10 cm
Focal length (35mm equiv.)
38 - 114 mm
35 - 104 mm
Aperture priority
No
No
Max. aperture
f3.1 - f5.9
Metering
ESP Digital
Centre weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/2 sec
2 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
5
Screen size
2.5"
2.7"
Screen resolution
115,000 dots
Video capture
Max. video resolution
Storage types
xD Picture card
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
2x AA
Weight
105 g
110 g
Dimensions
90.5 x 55 x 16.5 mm
94 x 61 x 24 mm
Year
2007
2009
Choose cameras to compare
Popular comparisons:
- Olympus FE-230 vs. Nikon Coolpix S2700
- Olympus FE-230 vs. Olympus Stylus 5010
- Olympus FE-230 vs. Canon PowerShot A610
- Olympus FE-230 vs. Sony Cyber-shot DSC-W610
- Olympus FE-230 vs. Canon PowerShot G16
- Olympus FE-230 vs. Nikon Coolpix S3300
- Olympus FE-230 vs. Canon PowerShot SX740 HS
- Olympus FE-230 vs. Olympus FE-360
- Olympus FE-230 vs. HP Photosmart 850
- Olympus FE-230 vs. Olympus SP 320
- Olympus FE-230 vs. Olympus FE-4000
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Olympus FE-230 diagonal
The diagonal of FE-230 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Praktica Dpix 1000z diagonal
The diagonal of Dpix 1000z sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
FE-230 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Dpix 1000z sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
FE-230 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3072 pixels
Sensor resolution width = 3072 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.87 µm |
3072 |
Dpix 1000z pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3683 pixels
Sensor resolution width = 3683 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.67 µm |
3683 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
FE-230 pixel area
Pixel pitch = 1.87 µm
Pixel area = 1.87² = 3.5 µm²
Pixel area = 1.87² = 3.5 µm²
Dpix 1000z pixel area
Pixel pitch = 1.67 µm
Pixel area = 1.67² = 2.79 µm²
Pixel area = 1.67² = 2.79 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
FE-230 pixel density
Sensor resolution width = 3072 pixels
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3072 / 0.575)² / 1000000 = 28.54 MP/cm²
Dpix 1000z pixel density
Sensor resolution width = 3683 pixels
Sensor width = 0.616 cm
Pixel density = (3683 / 0.616)² / 1000000 = 35.75 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3683 / 0.616)² / 1000000 = 35.75 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
FE-230 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.10
Resolution horizontal: X × r = 2310 × 1.33 = 3072
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Sensor height = 4.32 mm
Effective megapixels = 7.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2310
Sensor resolution = 3072 x 2310
Dpix 1000z sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.20
Resolution horizontal: X × r = 2769 × 1.33 = 3683
Resolution vertical: X = 2769
Sensor resolution = 3683 x 2769
Sensor height = 4.62 mm
Effective megapixels = 10.20
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2769
Sensor resolution = 3683 x 2769
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
FE-230 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
Dpix 1000z crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
FE-230 equivalent aperture
Crop factor = 6.02
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 6.02 = f18.7 - f35.5
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 6.02 = f18.7 - f35.5
Dpix 1000z equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Praktica Dpix 1000z, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Praktica Dpix 1000z is 5.62
Crop factor for Praktica Dpix 1000z is 5.62
More comparisons of Olympus FE-230:
- Olympus FE-230 vs. Sony Cyber-shot DSC-W40
- Olympus FE-230 vs. Sony Cyber-shot DSC-S730
- Olympus FE-230 vs. Olympus Stylus 600
- Olympus FE-230 vs. Olympus FE-220
- Olympus FE-230 vs. Sony Cyber-shot DSC-W17
- Olympus FE-230 vs. Olympus FE-4030
- Olympus FE-230 vs. Olympus FE-5050
- Olympus FE-230 vs. Olympus FE-5020
- Olympus FE-230 vs. Olympus FE-290
- Olympus FE-230 vs. Fujifilm FinePix F470 Zoom
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.