Panasonic Lumix DMC-FZ1 vs. Olympus OM-D E-M10
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DMC-FZ1 | Olympus OM-D E-M10 | ||||
check price » | check price » |
Megapixels
2.00
16.10
Max. image resolution
1600 x 1200
4608 x 3456
Sensor
Sensor type
CCD
CMOS
Sensor size
1/3.2" (~ 4.5 x 3.37 mm)
Four Thirds (17.3 x 13 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 14.83 |
(ratio) | ||
Panasonic Lumix DMC-FZ1 | Olympus OM-D E-M10 |
Surface area:
15.17 mm² | vs | 224.90 mm² |
Difference: 209.73 mm² (1383%)
OM-D E-M10 sensor is approx. 14.83x bigger than FZ1 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 12 years between Panasonic FZ1 (2002) and
Olympus OM-D E-M10 (2014).
Twelve years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 6.43 µm² (85%)
A pixel on Olympus OM-D E-M10 sensor is approx. 85% bigger than a pixel on Panasonic FZ1.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic FZ1
Olympus OM-D E-M10
Total megapixels
2.10
17.20
Effective megapixels
2.00
16.10
Optical zoom
12x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200, 400
Auto, 200 - 25600
RAW
Manual focus
Normal focus range
30 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
35 - 420 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f2.8
Metering
Matrix, Multi-segment
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
Shutter priority
No
Yes
Min. shutter speed
8 sec
60 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
7
7
Screen size
1.5"
3"
Screen resolution
114,000 dots
1,037,000 dots
Video capture
Max. video resolution
1920x1080 (30p)
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
BLS-5 Li-ion battery
Weight
414 g
396 g
Dimensions
125 x 70 x 83 mm
119.1 x 82.3 x 45.9 mm
Year
2002
2014
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ2
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ3
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ20
- Panasonic Lumix DMC-FZ1 vs. Sony Cyber-shot DSC-H1
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ200
- Panasonic Lumix DMC-FZ1 vs. Olympus OM-D E-M10
- Panasonic Lumix DMC-FZ1 vs. Sony Cyber-shot DSC-HX100V
- Panasonic Lumix DMC-FZ1 vs. Nikon D5200
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ10
- Panasonic Lumix DMC-FZ1 vs. Fujifilm FinePix J28
- Panasonic Lumix DMC-FZ1 vs. Olympus XZ-2 iHS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic FZ1 diagonal
The diagonal of FZ1 sensor is not 1/3.2 or 0.31" (7.9 mm) as you might expect, but approximately two thirds of
that value - 5.62 mm. If you want to know why, see
sensor sizes.
w = 4.50 mm
h = 3.37 mm
w = 4.50 mm
h = 3.37 mm
Diagonal = √ | 4.50² + 3.37² | = 5.62 mm |
Olympus OM-D E-M10 diagonal
w = 17.30 mm
h = 13.00 mm
h = 13.00 mm
Diagonal = √ | 17.30² + 13.00² | = 21.64 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
FZ1 sensor area
Width = 4.50 mm
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
Height = 3.37 mm
Surface area = 4.50 × 3.37 = 15.17 mm²
OM-D E-M10 sensor area
Width = 17.30 mm
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Height = 13.00 mm
Surface area = 17.30 × 13.00 = 224.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
FZ1 pixel pitch
Sensor width = 4.50 mm
Sensor resolution width = 1637 pixels
Sensor resolution width = 1637 pixels
Pixel pitch = | 4.50 | × 1000 | = 2.75 µm |
1637 |
OM-D E-M10 pixel pitch
Sensor width = 17.30 mm
Sensor resolution width = 4627 pixels
Sensor resolution width = 4627 pixels
Pixel pitch = | 17.30 | × 1000 | = 3.74 µm |
4627 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
FZ1 pixel area
Pixel pitch = 2.75 µm
Pixel area = 2.75² = 7.56 µm²
Pixel area = 2.75² = 7.56 µm²
OM-D E-M10 pixel area
Pixel pitch = 3.74 µm
Pixel area = 3.74² = 13.99 µm²
Pixel area = 3.74² = 13.99 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
FZ1 pixel density
Sensor resolution width = 1637 pixels
Sensor width = 0.45 cm
Pixel density = (1637 / 0.45)² / 1000000 = 13.23 MP/cm²
Sensor width = 0.45 cm
Pixel density = (1637 / 0.45)² / 1000000 = 13.23 MP/cm²
OM-D E-M10 pixel density
Sensor resolution width = 4627 pixels
Sensor width = 1.73 cm
Pixel density = (4627 / 1.73)² / 1000000 = 7.15 MP/cm²
Sensor width = 1.73 cm
Pixel density = (4627 / 1.73)² / 1000000 = 7.15 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
FZ1 sensor resolution
Sensor width = 4.50 mm
Sensor height = 3.37 mm
Effective megapixels = 2.00
Resolution horizontal: X × r = 1222 × 1.34 = 1637
Resolution vertical: X = 1222
Sensor resolution = 1637 x 1222
Sensor height = 3.37 mm
Effective megapixels = 2.00
r = 4.50/3.37 = 1.34 |
|
Resolution vertical: X = 1222
Sensor resolution = 1637 x 1222
OM-D E-M10 sensor resolution
Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 16.10
Resolution horizontal: X × r = 3479 × 1.33 = 4627
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Sensor height = 13.00 mm
Effective megapixels = 16.10
r = 17.30/13.00 = 1.33 |
|
Resolution vertical: X = 3479
Sensor resolution = 4627 x 3479
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
FZ1 crop factor
Sensor diagonal in mm = 5.62 mm
Crop factor = | 43.27 | = 7.7 |
5.62 |
OM-D E-M10 crop factor
Sensor diagonal in mm = 21.64 mm
Crop factor = | 43.27 | = 2 |
21.64 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
FZ1 equivalent aperture
Crop factor = 7.7
Aperture = f2.8 - f2.8
35-mm equivalent aperture = (f2.8 - f2.8) × 7.7 = f21.6 - f21.6
Aperture = f2.8 - f2.8
35-mm equivalent aperture = (f2.8 - f2.8) × 7.7 = f21.6 - f21.6
OM-D E-M10 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Olympus OM-D E-M10, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Olympus OM-D E-M10 is 2
Crop factor for Olympus OM-D E-M10 is 2
More comparisons of Panasonic FZ1:
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ5
- Panasonic Lumix DMC-FZ1 vs. Fujifilm X20
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ7
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-GF1
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ1000
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ35
- Panasonic Lumix DMC-FZ1 vs. Sony Alpha NEX-3N
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ30
- Panasonic Lumix DMC-FZ1 vs. Panasonic Lumix DMC-FZ300
- Panasonic Lumix DMC-FZ1 vs. Canon EOS D60
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.