Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-TZ5
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DMC-LX1 | Panasonic Lumix DMC-TZ5 | ||||
check price » | check price » |
Megapixels
8.30
9.10
Max. image resolution
3840 x 2160
3456 x 2592
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.65" (~ 7.76 x 5.81 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.63 | : | 1 |
(ratio) | ||
Panasonic Lumix DMC-LX1 | Panasonic Lumix DMC-TZ5 |
Surface area:
45.09 mm² | vs | 27.72 mm² |
Difference: 17.37 mm² (63%)
LX1 sensor is approx. 1.63x bigger than TZ5 sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Panasonic LX1 (2005) and Panasonic TZ5 (2008).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.37 µm² (77%)
A pixel on Panasonic LX1 sensor is approx. 77% bigger than a pixel on Panasonic TZ5.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic LX1
Panasonic TZ5
Total megapixels
8.60
10.70
Effective megapixels
8.30
9.10
Optical zoom
4x
10x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400
Auto, 100, 200, 400, 800, 1600, 6400
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
5 cm
5 cm
Focal length (35mm equiv.)
28 - 112 mm
28 - 280 mm
Aperture priority
Yes
No
Max. aperture
f2.8 - f4.9
f3.3 - f4.9
Metering
Centre weighted, Multi-segment, Spot
Centre weighted, Intelligent Multiple, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
60 sec
60 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
6
Screen size
2.5"
3"
Screen resolution
207,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SDHC, Secure Digital
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
Lithium-Ion rechargeable
Weight
185 g
214 g
Dimensions
106 x 56 x 26 mm
103.3 x 59.3 x 36.5 mm
Year
2005
2008
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-LX3
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-LX2
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-LX7
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-LX100
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-LX5
- Panasonic Lumix DMC-LX1 vs. Nokia Lumia 1020
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-TZ5
- Panasonic Lumix DMC-LX1 vs. Leica D-LUX 2
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-FX100
- Panasonic Lumix DMC-LX1 vs. Sony Cyber-shot DSC-RX100 III
- Panasonic Lumix DMC-LX1 vs. Sony Cyber-shot DSC-RX100
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic LX1 diagonal
The diagonal of LX1 sensor is not 1/1.65 or 0.61" (15.4 mm) as you might expect, but approximately two thirds of
that value - 9.69 mm. If you want to know why, see
sensor sizes.
w = 7.76 mm
h = 5.81 mm
w = 7.76 mm
h = 5.81 mm
Diagonal = √ | 7.76² + 5.81² | = 9.69 mm |
Panasonic TZ5 diagonal
The diagonal of TZ5 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
LX1 sensor area
Width = 7.76 mm
Height = 5.81 mm
Surface area = 7.76 × 5.81 = 45.09 mm²
Height = 5.81 mm
Surface area = 7.76 × 5.81 = 45.09 mm²
TZ5 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
LX1 pixel pitch
Sensor width = 7.76 mm
Sensor resolution width = 3335 pixels
Sensor resolution width = 3335 pixels
Pixel pitch = | 7.76 | × 1000 | = 2.33 µm |
3335 |
TZ5 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 3479 pixels
Sensor resolution width = 3479 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.75 µm |
3479 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
LX1 pixel area
Pixel pitch = 2.33 µm
Pixel area = 2.33² = 5.43 µm²
Pixel area = 2.33² = 5.43 µm²
TZ5 pixel area
Pixel pitch = 1.75 µm
Pixel area = 1.75² = 3.06 µm²
Pixel area = 1.75² = 3.06 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
LX1 pixel density
Sensor resolution width = 3335 pixels
Sensor width = 0.776 cm
Pixel density = (3335 / 0.776)² / 1000000 = 18.47 MP/cm²
Sensor width = 0.776 cm
Pixel density = (3335 / 0.776)² / 1000000 = 18.47 MP/cm²
TZ5 pixel density
Sensor resolution width = 3479 pixels
Sensor width = 0.608 cm
Pixel density = (3479 / 0.608)² / 1000000 = 32.74 MP/cm²
Sensor width = 0.608 cm
Pixel density = (3479 / 0.608)² / 1000000 = 32.74 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
LX1 sensor resolution
Sensor width = 7.76 mm
Sensor height = 5.81 mm
Effective megapixels = 8.30
Resolution horizontal: X × r = 2489 × 1.34 = 3335
Resolution vertical: X = 2489
Sensor resolution = 3335 x 2489
Sensor height = 5.81 mm
Effective megapixels = 8.30
r = 7.76/5.81 = 1.34 |
|
Resolution vertical: X = 2489
Sensor resolution = 3335 x 2489
TZ5 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 9.10
Resolution horizontal: X × r = 2616 × 1.33 = 3479
Resolution vertical: X = 2616
Sensor resolution = 3479 x 2616
Sensor height = 4.56 mm
Effective megapixels = 9.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 2616
Sensor resolution = 3479 x 2616
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
LX1 crop factor
Sensor diagonal in mm = 9.69 mm
Crop factor = | 43.27 | = 4.47 |
9.69 |
TZ5 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
LX1 equivalent aperture
Crop factor = 4.47
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.47 = f12.5 - f21.9
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 4.47 = f12.5 - f21.9
TZ5 equivalent aperture
Crop factor = 5.69
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 5.69 = f18.8 - f27.9
More comparisons of Panasonic LX1:
- Panasonic Lumix DMC-LX1 vs. Olympus XZ-1
- Panasonic Lumix DMC-LX1 vs. Nikon 1 J2
- Panasonic Lumix DMC-LX1 vs. Nikon Coolpix P300
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-FZ200
- Panasonic Lumix DMC-LX1 vs. Canon PowerShot G6
- Panasonic Lumix DMC-LX1 vs. Olympus C-7070 Wide Zoom
- Panasonic Lumix DMC-LX1 vs. Fujifilm FinePix F47fd
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-L1
- Panasonic Lumix DMC-LX1 vs. Nikon D90
- Panasonic Lumix DMC-LX1 vs. Panasonic Lumix DMC-FS40
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.