Panasonic Lumix DMC-TS3 vs. Sony Cyber-shot DSC-TX30
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DMC-TS3 | Sony Cyber-shot DSC-TX30 | ||||
check price » | check price » |
Megapixels
12.10
18.20
Max. image resolution
4000 x 3000
4896 x 3672
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.33" (~ 6.08 x 4.56 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.03 |
(ratio) | ||
Panasonic Lumix DMC-TS3 | Sony Cyber-shot DSC-TX30 |
Surface area:
27.72 mm² | vs | 28.46 mm² |
Difference: 0.74 mm² (3%)
TX30 sensor is slightly bigger than TS3 sensor (only 3% difference).
Note: You are comparing cameras of different generations.
There is a 2 year gap between Panasonic TS3 (2011) and Sony TX30 (2013).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.75 µm² (48%)
A pixel on Panasonic TS3 sensor is approx. 48% bigger than a pixel on Sony TX30.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic TS3
Sony TX30
Total megapixels
12.50
Effective megapixels
12.10
18.20
Optical zoom
4.6x
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400, 800, 1600 - 6400
Auto, 80 - 12800
RAW
Manual focus
Normal focus range
30 cm
Macro focus range
5 cm
3 cm
Focal length (35mm equiv.)
28 - 128 mm
26-130 mm
Aperture priority
No
No
Max. aperture
f3.3 - f5.9
f3.5 - f4.8
Metering
Intelligent Multiple
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
60 sec
4 sec
Max. shutter speed
1/1300 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
7
Screen size
2.7"
3.3"
Screen resolution
230,000 dots
1,229,760 dots
Video capture
Max. video resolution
Storage types
SDHC, SDXC, Secure Digital
SD/SDHC/SDXC, Memory Stick Duo/Pro Duo/Pro-HG Duo/XC-HG Duo
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable battery
Rechargeable Battery Pack (NP-BN)
Weight
197 g
140 g
Dimensions
104 x 64 x 27 mm
96.4 x 59.3 x 15.4 mm
Year
2011
2013
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-TS4
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-TS30
- Panasonic Lumix DMC-TS3 vs. Nikon Coolpix AW100
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-TS25
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-TS2
- Panasonic Lumix DMC-TS3 vs. Olympus Tough TG-4
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-TS5
- Panasonic Lumix DMC-TS3 vs. Olympus Tough TG-2 iHS
- Panasonic Lumix DMC-TS3 vs. Sony Cyber-shot DSC-TX30
- Panasonic Lumix DMC-TS3 vs. Nikon Coolpix AW110
- Panasonic Lumix DMC-TS3 vs. Panasonic Lumix DMC-ZS3
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic TS3 diagonal
The diagonal of TS3 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Sony TX30 diagonal
The diagonal of TX30 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
TS3 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
TX30 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
TS3 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4011 pixels
Sensor resolution width = 4011 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.52 µm |
4011 |
TX30 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4920 pixels
Sensor resolution width = 4920 pixels
Pixel pitch = | 6.16 | × 1000 | = 1.25 µm |
4920 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
TS3 pixel area
Pixel pitch = 1.52 µm
Pixel area = 1.52² = 2.31 µm²
Pixel area = 1.52² = 2.31 µm²
TX30 pixel area
Pixel pitch = 1.25 µm
Pixel area = 1.25² = 1.56 µm²
Pixel area = 1.25² = 1.56 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
TS3 pixel density
Sensor resolution width = 4011 pixels
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4011 / 0.608)² / 1000000 = 43.52 MP/cm²
TX30 pixel density
Sensor resolution width = 4920 pixels
Sensor width = 0.616 cm
Pixel density = (4920 / 0.616)² / 1000000 = 63.79 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4920 / 0.616)² / 1000000 = 63.79 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
TS3 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 12.10
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
Sensor height = 4.56 mm
Effective megapixels = 12.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3016
Sensor resolution = 4011 x 3016
TX30 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 18.20
Resolution horizontal: X × r = 3699 × 1.33 = 4920
Resolution vertical: X = 3699
Sensor resolution = 4920 x 3699
Sensor height = 4.62 mm
Effective megapixels = 18.20
r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3699
Sensor resolution = 4920 x 3699
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
TS3 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
TX30 crop factor
Sensor diagonal in mm = 7.70 mm
Crop factor = | 43.27 | = 5.62 |
7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
TS3 equivalent aperture
Crop factor = 5.69
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 5.69 = f18.8 - f33.6
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 5.69 = f18.8 - f33.6
TX30 equivalent aperture
Crop factor = 5.62
Aperture = f3.5 - f4.8
35-mm equivalent aperture = (f3.5 - f4.8) × 5.62 = f19.7 - f27
Aperture = f3.5 - f4.8
35-mm equivalent aperture = (f3.5 - f4.8) × 5.62 = f19.7 - f27
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.