Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-SZ7
Comparison
change cameras » | |||||
|
vs |
|
|||
Panasonic Lumix DMC-ZS1 | Panasonic Lumix DMC-SZ7 | ||||
check price » | check price » |
Megapixels
10.10
14.10
Max. image resolution
3648 x 2736
4320 x 3240
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.33" (~ 6.08 x 4.56 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1.12 |
(ratio) | ||
Panasonic Lumix DMC-ZS1 | Panasonic Lumix DMC-SZ7 |
Surface area:
24.84 mm² | vs | 27.72 mm² |
Difference: 2.88 mm² (12%)
SZ7 sensor is approx. 1.12x bigger than ZS1 sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Panasonic ZS1 (2009) and Panasonic SZ7 (2012).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.5 µm² (26%)
A pixel on Panasonic ZS1 sensor is approx. 26% bigger than a pixel on Panasonic SZ7.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Panasonic ZS1
Panasonic SZ7
Total megapixels
10.30
15.30
Effective megapixels
10.10
14.10
Optical zoom
12x
10x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600 - 6400
Auto, 100 - 3200
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
3 cm
5 cm
Focal length (35mm equiv.)
25 - 300 mm
25 - 250 mm
Aperture priority
No
No
Max. aperture
f3.3 - f4.9
f3.1 - f5.9
Metering
Intelligent Multiple
Matrix, Multi-segment
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
60 sec
8 sec
Max. shutter speed
1/2000 sec
1/1600 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
7
Screen size
2.7"
3"
Screen resolution
230,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, SDHC, Secure Digital
SDHC, SDXC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
Lithium-Ion rechargeable battery
Weight
229 g
133 g
Dimensions
103.3 x 59.6 x 32.8 mm
99 x 59 x 21 mm
Year
2009
2012
Choose cameras to compare
Popular comparisons:
- Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-TZ5
- Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-ZS3
- Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-SZ7
- Panasonic Lumix DMC-ZS1 vs. Sony Cyber-shot DSC-WX50
- Panasonic Lumix DMC-ZS1 vs. Canon PowerShot ELPH 110 HS
- Panasonic Lumix DMC-ZS1 vs. Canon PowerShot SX200 IS
- Panasonic Lumix DMC-ZS1 vs. Sony Cyber-shot DSC-H70
- Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-ZS25
- Panasonic Lumix DMC-ZS1 vs. Nikon Coolpix S3500
- Panasonic Lumix DMC-ZS1 vs. Casio Exilim EX-Z350
- Panasonic Lumix DMC-ZS1 vs. Panasonic Lumix DMC-ZS8
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Panasonic ZS1 diagonal
The diagonal of ZS1 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Panasonic SZ7 diagonal
The diagonal of SZ7 sensor is not 1/2.33 or 0.43" (10.9 mm) as you might expect, but approximately two thirds of
that value - 7.6 mm. If you want to know why, see
sensor sizes.
w = 6.08 mm
h = 4.56 mm
w = 6.08 mm
h = 4.56 mm
Diagonal = √ | 6.08² + 4.56² | = 7.60 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
ZS1 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
SZ7 sensor area
Width = 6.08 mm
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Height = 4.56 mm
Surface area = 6.08 × 4.56 = 27.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
ZS1 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3665 pixels
Sensor resolution width = 3665 pixels
Pixel pitch = | 5.75 | × 1000 | = 1.57 µm |
3665 |
SZ7 pixel pitch
Sensor width = 6.08 mm
Sensor resolution width = 4330 pixels
Sensor resolution width = 4330 pixels
Pixel pitch = | 6.08 | × 1000 | = 1.4 µm |
4330 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
ZS1 pixel area
Pixel pitch = 1.57 µm
Pixel area = 1.57² = 2.46 µm²
Pixel area = 1.57² = 2.46 µm²
SZ7 pixel area
Pixel pitch = 1.4 µm
Pixel area = 1.4² = 1.96 µm²
Pixel area = 1.4² = 1.96 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
ZS1 pixel density
Sensor resolution width = 3665 pixels
Sensor width = 0.575 cm
Pixel density = (3665 / 0.575)² / 1000000 = 40.63 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3665 / 0.575)² / 1000000 = 40.63 MP/cm²
SZ7 pixel density
Sensor resolution width = 4330 pixels
Sensor width = 0.608 cm
Pixel density = (4330 / 0.608)² / 1000000 = 50.72 MP/cm²
Sensor width = 0.608 cm
Pixel density = (4330 / 0.608)² / 1000000 = 50.72 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
ZS1 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2756 × 1.33 = 3665
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
Sensor height = 4.32 mm
Effective megapixels = 10.10
r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2756
Sensor resolution = 3665 x 2756
SZ7 sensor resolution
Sensor width = 6.08 mm
Sensor height = 4.56 mm
Effective megapixels = 14.10
Resolution horizontal: X × r = 3256 × 1.33 = 4330
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
Sensor height = 4.56 mm
Effective megapixels = 14.10
r = 6.08/4.56 = 1.33 |
|
Resolution vertical: X = 3256
Sensor resolution = 4330 x 3256
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
ZS1 crop factor
Sensor diagonal in mm = 7.19 mm
Crop factor = | 43.27 | = 6.02 |
7.19 |
SZ7 crop factor
Sensor diagonal in mm = 7.60 mm
Crop factor = | 43.27 | = 5.69 |
7.60 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
ZS1 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 6.02 = f19.9 - f29.5
Aperture = f3.3 - f4.9
35-mm equivalent aperture = (f3.3 - f4.9) × 6.02 = f19.9 - f29.5
SZ7 equivalent aperture
Crop factor = 5.69
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.69 = f17.6 - f33.6
Aperture = f3.1 - f5.9
35-mm equivalent aperture = (f3.1 - f5.9) × 5.69 = f17.6 - f33.6
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.