Praktica Dpix 910z vs. Panasonic Lumix DMC-LZ8
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Praktica Dpix 910z | Panasonic Lumix DMC-LZ8 | ||||
| check price » | check price » | ||||
Megapixels
9.00
8.10
Max. image resolution
4032 x 3024
3264 x 2448
Sensor
Sensor type
CCD
CCD
Sensor size
1/2" (~ 6.4 x 4.8 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.24 | : | 1 |
| (ratio) | ||
| Praktica Dpix 910z | Panasonic Lumix DMC-LZ8 | |
Surface area:
| 30.72 mm² | vs | 24.84 mm² |
Difference: 5.88 mm² (24%)
Dpix 910z sensor is approx. 1.24x bigger than LZ8 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.36 µm² (12%)
A pixel on Praktica Dpix 910z sensor is approx. 12% bigger than a pixel on Panasonic LZ8.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Praktica Dpix 910z
Panasonic LZ8
Total megapixels
8.30
Effective megapixels
8.10
Optical zoom
Yes
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800
Auto, Hi Auto, (1600-6400), 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
60 cm
50 cm
Macro focus range
5 cm
5 cm
Focal length (35mm equiv.)
36 - 108 mm
32 - 160 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f4.6
f3.3 - f5.9
Metering
Matrix, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
1/2 sec
60 sec
Max. shutter speed
1/4000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
4
Screen size
2.4"
2.5"
Screen resolution
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SD/MMC/SDHC card, Internal
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
AA (2) NiMH batteries
Weight
120 g
191 g
Dimensions
88 x 62 x 30 mm
98 x 62 x 33 mm
Year
2009
2008
Choose cameras to compare
Popular comparisons:
- Praktica Dpix 910z vs. Praktica Dpix 1000z
- Praktica Dpix 910z vs. Fujifilm FinePix A900
- Praktica Dpix 910z vs. Panasonic Lumix DMC-LZ8
- Praktica Dpix 910z vs. Fujifilm FinePix AV100
- Praktica Dpix 910z vs. Pentax Optio M20
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Praktica Dpix 910z diagonal
The diagonal of Dpix 910z sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Panasonic LZ8 diagonal
The diagonal of LZ8 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Dpix 910z sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
LZ8 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Dpix 910z pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 3459 pixels
Sensor resolution width = 3459 pixels
| Pixel pitch = | 6.40 | × 1000 | = 1.85 µm |
| 3459 |
LZ8 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3282 pixels
Sensor resolution width = 3282 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.75 µm |
| 3282 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Dpix 910z pixel area
Pixel pitch = 1.85 µm
Pixel area = 1.85² = 3.42 µm²
Pixel area = 1.85² = 3.42 µm²
LZ8 pixel area
Pixel pitch = 1.75 µm
Pixel area = 1.75² = 3.06 µm²
Pixel area = 1.75² = 3.06 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Dpix 910z pixel density
Sensor resolution width = 3459 pixels
Sensor width = 0.64 cm
Pixel density = (3459 / 0.64)² / 1000000 = 29.21 MP/cm²
Sensor width = 0.64 cm
Pixel density = (3459 / 0.64)² / 1000000 = 29.21 MP/cm²
LZ8 pixel density
Sensor resolution width = 3282 pixels
Sensor width = 0.575 cm
Pixel density = (3282 / 0.575)² / 1000000 = 32.58 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3282 / 0.575)² / 1000000 = 32.58 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Dpix 910z sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 9.00
Resolution horizontal: X × r = 2601 × 1.33 = 3459
Resolution vertical: X = 2601
Sensor resolution = 3459 x 2601
Sensor height = 4.80 mm
Effective megapixels = 9.00
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 2601
Sensor resolution = 3459 x 2601
LZ8 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 8.10
Resolution horizontal: X × r = 2468 × 1.33 = 3282
Resolution vertical: X = 2468
Sensor resolution = 3282 x 2468
Sensor height = 4.32 mm
Effective megapixels = 8.10
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2468
Sensor resolution = 3282 x 2468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Dpix 910z crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
LZ8 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Dpix 910z equivalent aperture
Crop factor = 5.41
Aperture = f2.8 - f4.6
35-mm equivalent aperture = (f2.8 - f4.6) × 5.41 = f15.1 - f24.9
Aperture = f2.8 - f4.6
35-mm equivalent aperture = (f2.8 - f4.6) × 5.41 = f15.1 - f24.9
LZ8 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 6.02 = f19.9 - f35.5
Aperture = f3.3 - f5.9
35-mm equivalent aperture = (f3.3 - f5.9) × 6.02 = f19.9 - f35.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.