Praktica Luxmedia 7203 vs. Canon PowerShot A60

Comparison

change cameras »

Praktica Luxmedia 7203

Canon PowerShot A60

check price »

Megapixels

7.38

1.90

Max. image resolution

3264 x 2448

1600 x 1200

Sensor

Sensor type

CCD

Sensor size

1/2.5" (~ 5.75 x 4.32 mm)

1/2.7" (~ 5.33 x 4 mm)

Sensor resolution

3133 x 2356

1589 x 1195

Diagonal

7.19 mm

6.66 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1.17	:	1
(ratio)

Praktica Luxmedia 7203		Canon PowerShot A60

Surface area:

24.84 mm²

21.32 mm²

Difference: 3.52 mm² (17%)

Luxmedia 7203 sensor is approx. 1.17x bigger than A60 sensor.

Note: You are comparing cameras of different generations. There is a 3 year gap between Praktica Luxmedia 7203 (2006) and Canon A60 (2003). All things being equal, newer sensor generations generally outperform the older.

Pixel pitch

1.84 µm

3.35 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 1.51 µm (82%)

Pixel pitch of A60 is approx. 82% higher than pixel pitch of Luxmedia 7203.

Pixel area

3.39 µm²

11.22 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 7.83 µm² (231%)

A pixel on Canon A60 sensor is approx. 231% bigger than a pixel on Praktica Luxmedia 7203.

Pixel density

29.69 MP/cm²

8.89 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 20.8 µm (234%)

Praktica Luxmedia 7203 has approx. 234% higher pixel density than Canon A60.

To learn about the accuracy of these numbers, click here.

Specs

Praktica Luxmedia 7203

Canon A60

Crop factor

6.02

6.5

Total megapixels

2.10

Effective megapixels

1.90

Optical zoom

Yes

Digital zoom

Yes

ISO sensitivity

Auto, 100, 200, 400

Auto, 50, 100, 200, 400

RAW

Manual focus

Normal focus range

40 cm

46 cm

Macro focus range

10 cm

5 cm

Focal length (35mm equiv.)

38 - 114 mm

35 - 105 mm

Aperture priority

Yes

Max. aperture

f2.8 - f4.9

f2.8 - f4.8

Max. aperture (35mm equiv.)

f16.9 - f29.5

f18.2 - f31.2

Metering

Centre weighted, Spot

Centre weighted, Evaluative, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

8 sec

15 sec

Max. shutter speed

1/1500 sec

1/2000 sec

Built-in flash

External flash

Viewfinder

None

Optical (tunnel)

White balance presets

Screen size

1.5"

Screen resolution

230,000 dots

118,000 dots

Video capture

Max. video resolution

Storage types

Secure Digital

CompactFlash type I

USB

USB 2.0 (480 Mbit/sec)

USB 1.0

HDMI

Wireless

GPS

Battery

Li-Ion

AA (4) batteries (NiMH recommended)

Weight

140 g

315 g

Dimensions

92 x 56 x 20.5 mm

101 x 64 x 32 mm

Year

2006

2003

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Praktica Luxmedia 7203 diagonal

The diagonal of Luxmedia 7203 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Canon A60 diagonal

The diagonal of A60 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm

Diagonal = √

5.33² + 4.00²

= 6.66 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

Luxmedia 7203 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

A60 sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

Luxmedia 7203 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 3133 pixels

Pixel pitch =	5.75	× 1000	= 1.84 µm
	3133

A60 pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 1589 pixels

Pixel pitch =	5.33	× 1000	= 3.35 µm
	1589

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

Luxmedia 7203 pixel area

Pixel pitch = 1.84 µm

Pixel area = 1.84² = 3.39 µm²

A60 pixel area

Pixel pitch = 3.35 µm

Pixel area = 3.35² = 11.22 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

Luxmedia 7203 pixel density

Sensor resolution width = 3133 pixels
Sensor width = 0.575 cm

Pixel density = (3133 / 0.575)² / 1000000 = 29.69 MP/cm²

A60 pixel density

Sensor resolution width = 1589 pixels
Sensor width = 0.533 cm

Pixel density = (1589 / 0.533)² / 1000000 = 8.89 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

Luxmedia 7203 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.38

r = 5.75/4.32 = 1.33

X = √	7.38 × 1000000	= 2356
	1.33

Resolution horizontal: X × r = 2356 × 1.33 = 3133
Resolution vertical: X = 2356

Sensor resolution = 3133 x 2356

A60 sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 1.90

r = 5.33/4.00 = 1.33

X = √	1.90 × 1000000	= 1195
	1.33

Resolution horizontal: X × r = 1195 × 1.33 = 1589
Resolution vertical: X = 1195

Sensor resolution = 1589 x 1195

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

Luxmedia 7203 crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

A60 crop factor

Sensor diagonal in mm = 6.66 mm

Crop factor =	43.27	= 6.5
	6.66

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

Luxmedia 7203 equivalent aperture

Crop factor = 6.02
Aperture = f2.8 - f4.9

35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5

A60 equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f4.8

35-mm equivalent aperture = (f2.8 - f4.8) × 6.5 = f18.2 - f31.2

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.