Ricoh Caplio R30 vs. Olympus VR-370
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Ricoh Caplio R30 | Olympus VR-370 | ||||
| check price » | check price » | ||||
Megapixels
4.90
16.00
Max. image resolution
2560 x 1920
4608 x 3456
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.15 |
| (ratio) | ||
| Ricoh Caplio R30 | Olympus VR-370 | |
Surface area:
| 24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
VR-370 sensor is approx. 1.15x bigger than R30 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 7 years between Ricoh R30 (2006) and Olympus VR-370 (2013).
Seven years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3.26 µm² (181%)
A pixel on Ricoh R30 sensor is approx. 181% bigger than a pixel on Olympus VR-370.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Ricoh R30
Olympus VR-370
Total megapixels
5.20
16.50
Effective megapixels
4.90
16.00
Optical zoom
5.7x
12.5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800
Auto, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
30 cm
20 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
28 - 160 mm
24 - 300 mm
Aperture priority
No
No
Max. aperture
f3.3 - f4.8
f3 - f5.9
Metering
256-segment Matrix, Centre weighted, Spot
ESP light metering
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
4 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
6
4
Screen size
2.5"
3"
Screen resolution
114,000 dots
460,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
SD/SDHC/SDXC
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion rechargeable
LI-50B Lithium-Ion battery
Weight
135 g
172 g
Dimensions
95 x 26 x 53 mm
104.3 x 60.2 x 28.3 mm
Year
2006
2013
Choose cameras to compare
Popular comparisons:
- Ricoh Caplio R30 vs. Ricoh Caplio GX100
- Ricoh Caplio R30 vs. Ricoh Caplio R3
- Ricoh Caplio R30 vs. Ricoh CX3
- Ricoh Caplio R30 vs. Ricoh Caplio R5
- Ricoh Caplio R30 vs. Nikon D90
- Ricoh Caplio R30 vs. Ricoh Caplio R6
- Ricoh Caplio R30 vs. Ricoh Caplio R4
- Ricoh Caplio R30 vs. Ricoh Caplio GX200
- Ricoh Caplio R30 vs. Ricoh GXR P10 28-300mm F3.5-5.6 VC
- Ricoh Caplio R30 vs. Ricoh Caplio R8
- Ricoh Caplio R30 vs. Olympus VR-370
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Ricoh R30 diagonal
The diagonal of R30 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Olympus VR-370 diagonal
The diagonal of VR-370 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
R30 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
VR-370 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
R30 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2552 pixels
Sensor resolution width = 2552 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.25 µm |
| 2552 |
VR-370 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4612 pixels
Sensor resolution width = 4612 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.34 µm |
| 4612 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
R30 pixel area
Pixel pitch = 2.25 µm
Pixel area = 2.25² = 5.06 µm²
Pixel area = 2.25² = 5.06 µm²
VR-370 pixel area
Pixel pitch = 1.34 µm
Pixel area = 1.34² = 1.8 µm²
Pixel area = 1.34² = 1.8 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
R30 pixel density
Sensor resolution width = 2552 pixels
Sensor width = 0.575 cm
Pixel density = (2552 / 0.575)² / 1000000 = 19.7 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2552 / 0.575)² / 1000000 = 19.7 MP/cm²
VR-370 pixel density
Sensor resolution width = 4612 pixels
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4612 / 0.616)² / 1000000 = 56.06 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
R30 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.90
Resolution horizontal: X × r = 1919 × 1.33 = 2552
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Sensor height = 4.32 mm
Effective megapixels = 4.90
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
VR-370 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 16.00
Resolution horizontal: X × r = 3468 × 1.33 = 4612
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Sensor height = 4.62 mm
Effective megapixels = 16.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3468
Sensor resolution = 4612 x 3468
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
R30 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
VR-370 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
R30 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f4.8
35-mm equivalent aperture = (f3.3 - f4.8) × 6.02 = f19.9 - f28.9
Aperture = f3.3 - f4.8
35-mm equivalent aperture = (f3.3 - f4.8) × 6.02 = f19.9 - f28.9
VR-370 equivalent aperture
Crop factor = 5.62
Aperture = f3 - f5.9
35-mm equivalent aperture = (f3 - f5.9) × 5.62 = f16.9 - f33.2
Aperture = f3 - f5.9
35-mm equivalent aperture = (f3 - f5.9) × 5.62 = f16.9 - f33.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.