Ricoh Caplio RR530 vs. Ricoh Caplio RR630
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Ricoh Caplio RR530 | Ricoh Caplio RR630 | ||||
| check price » | check price » | ||||
Megapixels
4.90
6.00
Max. image resolution
2560 x 1920
2848 x 2136
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.53 |
| (ratio) | ||
| Ricoh Caplio RR530 | Ricoh Caplio RR630 | |
Surface area:
| 24.84 mm² | vs | 37.90 mm² |
Difference: 13.06 mm² (53%)
RR630 sensor is approx. 1.53x bigger than RR530 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.29 µm² (25%)
A pixel on Ricoh RR630 sensor is approx. 25% bigger than a pixel on Ricoh RR530.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Ricoh RR530
Ricoh RR630
Total megapixels
5.20
6.20
Effective megapixels
4.90
6.00
Optical zoom
3x
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 50, 100, 200
Auto, 64, 100, 200
RAW
Manual focus
Normal focus range
50 cm
50 cm
Macro focus range
6 cm
6 cm
Focal length (35mm equiv.)
32 - 96 mm
36 - 108 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.8
f2.8 - f4.8
Metering
Centre weighted
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1 sec
2 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical (tunnel)
Optical (tunnel)
White balance presets
6
5
Screen size
1.8"
2"
Screen resolution
130,000 dots
130,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
Secure Digital
USB
USB 1.0
USB 1.0
HDMI
Wireless
GPS
Battery
AA (2) batteries (NiMH recommended)
AA (2) batteries (NiMH recommended)
Weight
130 g
150 g
Dimensions
91 x 27 x 61 mm
91 x 27 x 61 mm
Year
2005
2006
Choose cameras to compare
Popular comparisons:
- Ricoh Caplio RR530 vs. Ricoh Caplio RR630
- Ricoh Caplio RR530 vs. Panasonic Lumix DMC-LX3
- Ricoh Caplio RR530 vs. Ricoh Caplio R1V
- Ricoh Caplio RR530 vs. Canon PowerShot A470
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Ricoh RR530 diagonal
The diagonal of RR530 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Ricoh RR630 diagonal
The diagonal of RR630 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
RR530 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
RR630 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
RR530 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2552 pixels
Sensor resolution width = 2552 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.25 µm |
| 2552 |
RR630 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2825 pixels
Sensor resolution width = 2825 pixels
| Pixel pitch = | 7.11 | × 1000 | = 2.52 µm |
| 2825 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
RR530 pixel area
Pixel pitch = 2.25 µm
Pixel area = 2.25² = 5.06 µm²
Pixel area = 2.25² = 5.06 µm²
RR630 pixel area
Pixel pitch = 2.52 µm
Pixel area = 2.52² = 6.35 µm²
Pixel area = 2.52² = 6.35 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
RR530 pixel density
Sensor resolution width = 2552 pixels
Sensor width = 0.575 cm
Pixel density = (2552 / 0.575)² / 1000000 = 19.7 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2552 / 0.575)² / 1000000 = 19.7 MP/cm²
RR630 pixel density
Sensor resolution width = 2825 pixels
Sensor width = 0.711 cm
Pixel density = (2825 / 0.711)² / 1000000 = 15.79 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2825 / 0.711)² / 1000000 = 15.79 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
RR530 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.90
Resolution horizontal: X × r = 1919 × 1.33 = 2552
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
Sensor height = 4.32 mm
Effective megapixels = 4.90
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1919
Sensor resolution = 2552 x 1919
RR630 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 6.00
Resolution horizontal: X × r = 2124 × 1.33 = 2825
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Sensor height = 5.33 mm
Effective megapixels = 6.00
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2124
Sensor resolution = 2825 x 2124
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
RR530 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
RR630 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
RR530 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
RR630 equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.