Ricoh Caplio RR750 vs. Fujifilm FinePix AV110
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Ricoh Caplio RR750 | Fujifilm FinePix AV110 | ||||
| check price » | check price » | ||||
Megapixels
7.21
12.20
Max. image resolution
3072 x 2304
4000 x 3000
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2.3" (~ 6.16 x 4.62 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.15 |
| (ratio) | ||
| Ricoh Caplio RR750 | Fujifilm FinePix AV110 | |
Surface area:
| 24.84 mm² | vs | 28.46 mm² |
Difference: 3.62 mm² (15%)
AV110 sensor is approx. 1.15x bigger than RR750 sensor.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Ricoh RR750 (2007) and Fujifilm AV110 (2010).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 1.12 µm² (48%)
A pixel on Ricoh RR750 sensor is approx. 48% bigger than a pixel on Fujifilm AV110.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Ricoh RR750
Fujifilm AV110
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto
Auto, 100, 200, 400, 800, 1600, 3200
RAW
Manual focus
Normal focus range
35 cm
60 cm
Macro focus range
6 cm
10 cm
Focal length (35mm equiv.)
35 - 105 mm
32 - 96 mm
Aperture priority
No
No
Max. aperture
f2.8 - f4.8
f2.9 - f5.2
Metering
Centre weighted
TTL 256-zones metering
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
1/4 sec
8 sec
Max. shutter speed
1/1000 sec
1/1400 sec
Built-in flash
External flash
Viewfinder
None
None
White balance presets
5
Screen size
2.5"
2.7"
Screen resolution
153,600 dots
230,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
2x AA
2x AA
Weight
128 g
119 g
Dimensions
89.5 x 60.0 x 26.0 mm
93.0 x 60.2 x 27.8 mm
Year
2007
2010
Choose cameras to compare
Popular comparisons:
- Ricoh Caplio RR750 vs. Ricoh CX1
- Ricoh Caplio RR750 vs. Ricoh Caplio R2
- Ricoh Caplio RR750 vs. Ricoh Caplio RR530
- Ricoh Caplio RR750 vs. Fujifilm FinePix AV110
- Ricoh Caplio RR750 vs. Ricoh Caplio R4
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Ricoh RR750 diagonal
The diagonal of RR750 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Fujifilm AV110 diagonal
The diagonal of AV110 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
RR750 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
AV110 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
RR750 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3096 pixels
Sensor resolution width = 3096 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.86 µm |
| 3096 |
AV110 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 4029 pixels
Sensor resolution width = 4029 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.53 µm |
| 4029 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
RR750 pixel area
Pixel pitch = 1.86 µm
Pixel area = 1.86² = 3.46 µm²
Pixel area = 1.86² = 3.46 µm²
AV110 pixel area
Pixel pitch = 1.53 µm
Pixel area = 1.53² = 2.34 µm²
Pixel area = 1.53² = 2.34 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
RR750 pixel density
Sensor resolution width = 3096 pixels
Sensor width = 0.575 cm
Pixel density = (3096 / 0.575)² / 1000000 = 28.99 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3096 / 0.575)² / 1000000 = 28.99 MP/cm²
AV110 pixel density
Sensor resolution width = 4029 pixels
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
Sensor width = 0.616 cm
Pixel density = (4029 / 0.616)² / 1000000 = 42.78 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
RR750 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 7.21
Resolution horizontal: X × r = 2328 × 1.33 = 3096
Resolution vertical: X = 2328
Sensor resolution = 3096 x 2328
Sensor height = 4.32 mm
Effective megapixels = 7.21
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2328
Sensor resolution = 3096 x 2328
AV110 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.20
Resolution horizontal: X × r = 3029 × 1.33 = 4029
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
Sensor height = 4.62 mm
Effective megapixels = 12.20
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3029
Sensor resolution = 4029 x 3029
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
RR750 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
AV110 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
RR750 equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 6.02 = f16.9 - f28.9
AV110 equivalent aperture
Crop factor = 5.62
Aperture = f2.9 - f5.2
35-mm equivalent aperture = (f2.9 - f5.2) × 5.62 = f16.3 - f29.2
Aperture = f2.9 - f5.2
35-mm equivalent aperture = (f2.9 - f5.2) × 5.62 = f16.3 - f29.2
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.