Ricoh GR II vs. Ricoh GR III
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Ricoh GR II | Ricoh GR III | ||||
| check price » | check price » | ||||
Megapixels
16.20
24.24
Max. image resolution
4928 x 3264
6000 x 4000
Sensor
Sensor type
CMOS
CMOS
Sensor size
23.6 x 15.7 mm
23.5 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.01 | : | 1 |
| (ratio) | ||
| Ricoh GR II | Ricoh GR III | |
Surface area:
| 370.52 mm² | vs | 366.60 mm² |
Difference: 3.92 mm² (1%)
GR II sensor is slightly bigger than GR III sensor (only 1% difference).
Note: You are comparing cameras of different generations.
There is a 4 year gap between Ricoh GR II (2015) and Ricoh GR III (2019).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 7.89 µm² (52%)
A pixel on Ricoh GR II sensor is approx. 52% bigger than a pixel on Ricoh GR III.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Ricoh GR II
Ricoh GR III
Total megapixels
16.90
Effective megapixels
16.20
24.24
Optical zoom
1x
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100-25600
Auto, 100-102400
RAW
Manual focus
Normal focus range
30 cm
10 cm
Macro focus range
10 cm
6 cm
Focal length (35mm equiv.)
28 mm
28 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f16
f2.8
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Highlight-weighted, Spot
Exposure compensation
±4 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
300 sec
30 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (optional)
Optical (optional)
White balance presets
10
8
Screen size
3"
3"
Screen resolution
1,230,000 dots
1,036,800 dots
Video capture
Max. video resolution
1920x1080 (30p/25p/24p)
1920x1080 (60p/30p/24p)
Storage types
SD/SDHC/SDXC
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
Rechargeable Li-Ion battery DB-65
DB-110 lithium-ion battery
Weight
251 g
257 g
Dimensions
117 x 63 x 35 mm
109.4 x 61.9 x 33.2 mm
Year
2015
2019
Choose cameras to compare
Popular comparisons:
- Ricoh GR II vs. Panasonic Lumix DMC-LX100
- Ricoh GR II vs. Fujifilm X100T
- Ricoh GR II vs. Sony Cyber-shot DSC-RX100 III
- Ricoh GR II vs. Sony Cyber-shot DSC-RX100 V
- Ricoh GR II vs. Ricoh GR
- Ricoh GR II vs. Sony Cyber-shot DSC-RX100 IV
- Ricoh GR II vs. Fujifilm XF10
- Ricoh GR II vs. Ricoh GR III
- Ricoh GR II vs. Sony Alpha a6000
- Ricoh GR II vs. Nikon Coolpix A
- Ricoh GR II vs. Fujifilm X100F
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Ricoh GR II diagonal
w = 23.60 mm
h = 15.70 mm
h = 15.70 mm
| Diagonal = √ | 23.60² + 15.70² | = 28.35 mm |
Ricoh GR III diagonal
w = 23.50 mm
h = 15.60 mm
h = 15.60 mm
| Diagonal = √ | 23.50² + 15.60² | = 28.21 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
GR II sensor area
Width = 23.60 mm
Height = 15.70 mm
Surface area = 23.60 × 15.70 = 370.52 mm²
Height = 15.70 mm
Surface area = 23.60 × 15.70 = 370.52 mm²
GR III sensor area
Width = 23.50 mm
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
GR II pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 4929 pixels
Sensor resolution width = 4929 pixels
| Pixel pitch = | 23.60 | × 1000 | = 4.79 µm |
| 4929 |
GR III pixel pitch
Sensor width = 23.50 mm
Sensor resolution width = 6051 pixels
Sensor resolution width = 6051 pixels
| Pixel pitch = | 23.50 | × 1000 | = 3.88 µm |
| 6051 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
GR II pixel area
Pixel pitch = 4.79 µm
Pixel area = 4.79² = 22.94 µm²
Pixel area = 4.79² = 22.94 µm²
GR III pixel area
Pixel pitch = 3.88 µm
Pixel area = 3.88² = 15.05 µm²
Pixel area = 3.88² = 15.05 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
GR II pixel density
Sensor resolution width = 4929 pixels
Sensor width = 2.36 cm
Pixel density = (4929 / 2.36)² / 1000000 = 4.36 MP/cm²
Sensor width = 2.36 cm
Pixel density = (4929 / 2.36)² / 1000000 = 4.36 MP/cm²
GR III pixel density
Sensor resolution width = 6051 pixels
Sensor width = 2.35 cm
Pixel density = (6051 / 2.35)² / 1000000 = 6.63 MP/cm²
Sensor width = 2.35 cm
Pixel density = (6051 / 2.35)² / 1000000 = 6.63 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
GR II sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.70 mm
Effective megapixels = 16.20
Resolution horizontal: X × r = 3286 × 1.5 = 4929
Resolution vertical: X = 3286
Sensor resolution = 4929 x 3286
Sensor height = 15.70 mm
Effective megapixels = 16.20
| r = 23.60/15.70 = 1.5 |
|
Resolution vertical: X = 3286
Sensor resolution = 4929 x 3286
GR III sensor resolution
Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 24.24
Resolution horizontal: X × r = 4007 × 1.51 = 6051
Resolution vertical: X = 4007
Sensor resolution = 6051 x 4007
Sensor height = 15.60 mm
Effective megapixels = 24.24
| r = 23.50/15.60 = 1.51 |
|
Resolution vertical: X = 4007
Sensor resolution = 6051 x 4007
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
GR II crop factor
Sensor diagonal in mm = 28.35 mm
| Crop factor = | 43.27 | = 1.53 |
| 28.35 |
GR III crop factor
Sensor diagonal in mm = 28.21 mm
| Crop factor = | 43.27 | = 1.53 |
| 28.21 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
GR II equivalent aperture
Crop factor = 1.53
Aperture = f2.8 - f16
35-mm equivalent aperture = (f2.8 - f16) × 1.53 = f4.3 - f24.5
Aperture = f2.8 - f16
35-mm equivalent aperture = (f2.8 - f16) × 1.53 = f4.3 - f24.5
GR III equivalent aperture
Crop factor = 1.53
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.53 = f4.3
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.53 = f4.3
More comparisons of Ricoh GR II:
- Ricoh GR II vs. Leica D-Lux (Typ 109)
- Ricoh GR II vs. Fujifilm X70
- Ricoh GR II vs. Pentax MX-1
- Ricoh GR II vs. Olympus OM-D E-M10 II
- Ricoh GR II vs. Nikon D5500
- Ricoh GR II vs. Pentax K-5
- Ricoh GR II vs. Fujifilm X30
- Ricoh GR II vs. Canon EOS M3
- Ricoh GR II vs. Sony Cyber-shot DSC-RX1R
- Ricoh GR II vs. Sony Alpha a5000
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.