Ricoh R8 vs. Ricoh GR IIIx
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Ricoh R8 | Ricoh GR IIIx | ||||
| check price » | check price » | ||||
Megapixels
10.30
24.24
Max. image resolution
3648 x 2736
6000 x 4000
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
23.5 x 15.6 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 12.88 |
| (ratio) | ||
| Ricoh R8 | Ricoh GR IIIx | |
Surface area:
| 28.46 mm² | vs | 366.60 mm² |
Difference: 338.14 mm² (1188%)
GR IIIx sensor is approx. 12.88x bigger than R8 sensor.
Note: You are comparing sensors of vastly different generations.
There is a gap of 13 years between Ricoh R8 (2008) and
Ricoh GR IIIx (2021).
Thirteen years is a huge amount of time,
technology wise, resulting in newer sensor being much more
efficient than the older one.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 12.29 µm² (445%)
A pixel on Ricoh GR IIIx sensor is approx. 445% bigger than a pixel on Ricoh R8.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Ricoh R8
Ricoh GR IIIx
Total megapixels
Effective megapixels
24.24
Optical zoom
Yes
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800, 1600
Auto, 100-102400
RAW
Manual focus
Normal focus range
30 cm
20 cm
Macro focus range
1 cm
12 cm
Focal length (35mm equiv.)
28 - 200 mm
40 mm
Aperture priority
No
Yes
Max. aperture
f3.3 - f5.2
f2.8
Metering
256-segment Matrix, Centre weighted, Spot
Multi, Center-weighted, Highlight-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
No
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Electronic and Optical (optional)
White balance presets
6
8
Screen size
2.7"
3"
Screen resolution
460,000 dots
1,036,800 dots
Video capture
Max. video resolution
1920x1080 (60p/30p/24p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
DB-110 lithium-ion battery
Weight
168 g
262 g
Dimensions
102 x 58.3 x 26.1 mm
109.4 x 61.9 x 35.2 mm
Year
2008
2021
Choose cameras to compare
Popular comparisons:
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Ricoh R8 diagonal
The diagonal of R8 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Ricoh GR IIIx diagonal
w = 23.50 mm
h = 15.60 mm
h = 15.60 mm
| Diagonal = √ | 23.50² + 15.60² | = 28.21 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
R8 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
GR IIIx sensor area
Width = 23.50 mm
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Height = 15.60 mm
Surface area = 23.50 × 15.60 = 366.60 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
R8 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3701 pixels
Sensor resolution width = 3701 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.66 µm |
| 3701 |
GR IIIx pixel pitch
Sensor width = 23.50 mm
Sensor resolution width = 6051 pixels
Sensor resolution width = 6051 pixels
| Pixel pitch = | 23.50 | × 1000 | = 3.88 µm |
| 6051 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
R8 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
GR IIIx pixel area
Pixel pitch = 3.88 µm
Pixel area = 3.88² = 15.05 µm²
Pixel area = 3.88² = 15.05 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
R8 pixel density
Sensor resolution width = 3701 pixels
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
GR IIIx pixel density
Sensor resolution width = 6051 pixels
Sensor width = 2.35 cm
Pixel density = (6051 / 2.35)² / 1000000 = 6.63 MP/cm²
Sensor width = 2.35 cm
Pixel density = (6051 / 2.35)² / 1000000 = 6.63 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
R8 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.30
Resolution horizontal: X × r = 2783 × 1.33 = 3701
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
Sensor height = 4.62 mm
Effective megapixels = 10.30
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
GR IIIx sensor resolution
Sensor width = 23.50 mm
Sensor height = 15.60 mm
Effective megapixels = 24.24
Resolution horizontal: X × r = 4007 × 1.51 = 6051
Resolution vertical: X = 4007
Sensor resolution = 6051 x 4007
Sensor height = 15.60 mm
Effective megapixels = 24.24
| r = 23.50/15.60 = 1.51 |
|
Resolution vertical: X = 4007
Sensor resolution = 6051 x 4007
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
R8 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
GR IIIx crop factor
Sensor diagonal in mm = 28.21 mm
| Crop factor = | 43.27 | = 1.53 |
| 28.21 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
R8 equivalent aperture
Crop factor = 5.62
Aperture = f3.3 - f5.2
35-mm equivalent aperture = (f3.3 - f5.2) × 5.62 = f18.5 - f29.2
Aperture = f3.3 - f5.2
35-mm equivalent aperture = (f3.3 - f5.2) × 5.62 = f18.5 - f29.2
GR IIIx equivalent aperture
Crop factor = 1.53
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.53 = f4.3
Aperture = f2.8
35-mm equivalent aperture = (f2.8) × 1.53 = f4.3
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.