Rollei Compactline 200 vs. Leica M Edition 60
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Rollei Compactline 200 | Leica M Edition 60 | ||||
| check price » | check price » | ||||
Megapixels
12.00
24.00
Max. image resolution
4000 x 3000
5952 x 3976
Sensor
Sensor type
CCD
CMOS
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
36 x 24 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 30.36 |
| (ratio) | ||
| Rollei Compactline 200 | Leica M Edition 60 | |
Surface area:
| 28.46 mm² | vs | 864.00 mm² |
Difference: 835.54 mm² (2936%)
M Edition 60 sensor is approx. 30.36x bigger than Compactline 200 sensor.
Note: You are comparing cameras of different generations.
There is a 5 year gap between Rollei Compactline 200 (2009) and Leica M Edition 60 (2014).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 33.63 µm² (1419%)
A pixel on Leica M Edition 60 sensor is approx. 1419% bigger than a pixel on Rollei Compactline 200.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Rollei Compactline 200
Leica M Edition 60
Total megapixels
Effective megapixels
24.00
Optical zoom
Yes
Digital zoom
Yes
No
ISO sensitivity
Auto
Auto, Pull 100, 200-6400
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
35 - 106 mm
Aperture priority
No
Yes
Max. aperture
f3.1 - f5.6
Metering
Centre weighted
Center-weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
±3 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
4 sec
60 sec
Max. shutter speed
1/2000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
None
Optical (rangefinder)
White balance presets
6
6
Screen size
3"
3"
Screen resolution
230,000 dots
920,000 dots
Video capture
Max. video resolution
1920x1080 (25p)
Storage types
SDHC, Secure Digital
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
Lithium-Ion rechargeable battery
Weight
130 g
720 g
Dimensions
95.5 x 56.7 x 17.6 mm
138.6 x 42 x 80 mm
Year
2009
2014
Choose cameras to compare
Popular comparisons:
- Rollei Compactline 200 vs. Leica M Edition 60
- Rollei Compactline 200 vs. Nikon Coolpix S3100
- Rollei Compactline 200 vs. Canon PowerShot A3200 IS
- Rollei Compactline 200 vs. Sony Cyber-shot DSC-W570
- Rollei Compactline 200 vs. Panasonic Lumix DMC-FS62
- Rollei Compactline 200 vs. Fujifilm FinePix JZ500
- Rollei Compactline 200 vs. Sony Cyber-shot DSC-W830
- Rollei Compactline 200 vs. Sony ZV-1 Mark II
- Rollei Compactline 200 vs. Rollei Compactline 302
- Rollei Compactline 200 vs. Nikon Coolpix S60
- Rollei Compactline 200 vs. Nikon Coolpix A1000
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Rollei Compactline 200 diagonal
The diagonal of Compactline 200 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Leica M Edition 60 diagonal
w = 36.00 mm
h = 24.00 mm
h = 24.00 mm
| Diagonal = √ | 36.00² + 24.00² | = 43.27 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Compactline 200 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
M Edition 60 sensor area
Width = 36.00 mm
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Height = 24.00 mm
Surface area = 36.00 × 24.00 = 864.00 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
Compactline 200 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3995 pixels
Sensor resolution width = 3995 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.54 µm |
| 3995 |
M Edition 60 pixel pitch
Sensor width = 36.00 mm
Sensor resolution width = 6000 pixels
Sensor resolution width = 6000 pixels
| Pixel pitch = | 36.00 | × 1000 | = 6 µm |
| 6000 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
Compactline 200 pixel area
Pixel pitch = 1.54 µm
Pixel area = 1.54² = 2.37 µm²
Pixel area = 1.54² = 2.37 µm²
M Edition 60 pixel area
Pixel pitch = 6 µm
Pixel area = 6² = 36 µm²
Pixel area = 6² = 36 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
Compactline 200 pixel density
Sensor resolution width = 3995 pixels
Sensor width = 0.616 cm
Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3995 / 0.616)² / 1000000 = 42.06 MP/cm²
M Edition 60 pixel density
Sensor resolution width = 6000 pixels
Sensor width = 3.6 cm
Pixel density = (6000 / 3.6)² / 1000000 = 2.78 MP/cm²
Sensor width = 3.6 cm
Pixel density = (6000 / 3.6)² / 1000000 = 2.78 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Compactline 200 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.00
Resolution horizontal: X × r = 3004 × 1.33 = 3995
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
Sensor height = 4.62 mm
Effective megapixels = 12.00
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 3004
Sensor resolution = 3995 x 3004
M Edition 60 sensor resolution
Sensor width = 36.00 mm
Sensor height = 24.00 mm
Effective megapixels = 24.00
Resolution horizontal: X × r = 4000 × 1.5 = 6000
Resolution vertical: X = 4000
Sensor resolution = 6000 x 4000
Sensor height = 24.00 mm
Effective megapixels = 24.00
| r = 36.00/24.00 = 1.5 |
|
Resolution vertical: X = 4000
Sensor resolution = 6000 x 4000
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
Compactline 200 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
M Edition 60 crop factor
Sensor diagonal in mm = 43.27 mm
| Crop factor = | 43.27 | = 1 |
| 43.27 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Compactline 200 equivalent aperture
Crop factor = 5.62
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
Aperture = f3.1 - f5.6
35-mm equivalent aperture = (f3.1 - f5.6) × 5.62 = f17.4 - f31.5
M Edition 60 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Leica M Edition 60, take the aperture of the lens
you're using and multiply it with crop factor.
Since crop factor for Leica M Edition 60 is 1, the equivalent aperture is aperture.
Since crop factor for Leica M Edition 60 is 1, the equivalent aperture is aperture.
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.