Rollei dr 5100 vs. Rollei dr 5
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Rollei dr 5100 | Rollei dr 5 | ||||
| check price » | check price » | ||||
Megapixels
5.13
5.00
Max. image resolution
2592 x 1944
2560 x 1920
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.53 | : | 1 |
| (ratio) | ||
| Rollei dr 5100 | Rollei dr 5 | |
Surface area:
| 37.90 mm² | vs | 24.84 mm² |
Difference: 13.06 mm² (53%)
dr 5100 sensor is approx. 1.53x bigger than dr 5 sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.43 µm² (49%)
A pixel on Rollei dr 5100 sensor is approx. 49% bigger than a pixel on Rollei dr 5.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Rollei dr 5100
Rollei dr 5
Total megapixels
Effective megapixels
Optical zoom
Yes
Yes
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 64, 100, 200, 400, 800, 1600
Auto, 64, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
30 cm
30 cm
Macro focus range
1 cm
1 cm
Focal length (35mm equiv.)
28 - 85 mm
28 - 135 mm
Aperture priority
Yes
No
Max. aperture
f2.5 - f4.3
f3.3 - f4.8
Metering
256-segment Matrix, Centre weighted, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
No
Min. shutter speed
30 sec
8 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical
White balance presets
7
6
Screen size
1.8"
1.8"
Screen resolution
130,000 dots
110,000 dots
Video capture
Max. video resolution
Storage types
Secure Digital
MultiMedia, Secure Digital
USB
USB 1.1
USB 1.1
HDMI
Wireless
GPS
Battery
2x AA
2x AA, Li-Ion
Weight
205 g
150 g
Dimensions
114 x 58 x 29 mm
100 x 55 x 25 mm
Year
2005
2005
Choose cameras to compare
Popular comparisons:
- Rollei dr 5100 vs. Rollei dr 5
- Rollei dr 5100 vs. Ricoh Caplio GX
- Rollei dr 5100 vs. Ricoh Caplio GX8
- Rollei dr 5100 vs. Rollei RCP-8527X
- Rollei dr 5100 vs. Rollei dk4010
- Rollei dr 5100 vs. Ricoh Caplio GX100
- Rollei dr 5100 vs. Rollei dt 4200
- Rollei dr 5100 vs. Kodak EasyShare LS633
- Rollei dr 5100 vs. Canon Digital IXUS 500
- Rollei dr 5100 vs. Canon Digital IXUS 990 IS
- Rollei dr 5100 vs. Canon Digital IXUS 430
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Rollei dr 5100 diagonal
The diagonal of dr 5100 sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
| Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Rollei dr 5 diagonal
The diagonal of dr 5 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
dr 5100 sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
dr 5 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
dr 5100 pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2612 pixels
Sensor resolution width = 2612 pixels
| Pixel pitch = | 7.11 | × 1000 | = 2.72 µm |
| 2612 |
dr 5 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
| 2579 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
dr 5100 pixel area
Pixel pitch = 2.72 µm
Pixel area = 2.72² = 7.4 µm²
Pixel area = 2.72² = 7.4 µm²
dr 5 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
dr 5100 pixel density
Sensor resolution width = 2612 pixels
Sensor width = 0.711 cm
Pixel density = (2612 / 0.711)² / 1000000 = 13.5 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2612 / 0.711)² / 1000000 = 13.5 MP/cm²
dr 5 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
dr 5100 sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.13
Resolution horizontal: X × r = 1964 × 1.33 = 2612
Resolution vertical: X = 1964
Sensor resolution = 2612 x 1964
Sensor height = 5.33 mm
Effective megapixels = 5.13
| r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1964
Sensor resolution = 2612 x 1964
dr 5 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
dr 5100 crop factor
Sensor diagonal in mm = 8.89 mm
| Crop factor = | 43.27 | = 4.87 |
| 8.89 |
dr 5 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
dr 5100 equivalent aperture
Crop factor = 4.87
Aperture = f2.5 - f4.3
35-mm equivalent aperture = (f2.5 - f4.3) × 4.87 = f12.2 - f20.9
Aperture = f2.5 - f4.3
35-mm equivalent aperture = (f2.5 - f4.3) × 4.87 = f12.2 - f20.9
dr 5 equivalent aperture
Crop factor = 6.02
Aperture = f3.3 - f4.8
35-mm equivalent aperture = (f3.3 - f4.8) × 6.02 = f19.9 - f28.9
Aperture = f3.3 - f4.8
35-mm equivalent aperture = (f3.3 - f4.8) × 6.02 = f19.9 - f28.9
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.