Rollei RCP-5324 vs. Sony Cyber-shot DSC-D700
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Rollei RCP-5324 | Sony Cyber-shot DSC-D700 | ||||
| check price » | check price » | ||||
Megapixels
5.00
1.40
Max. image resolution
2560 x 1920
1344 x 1024
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.5" (~ 5.75 x 4.32 mm)
1/2" (~ 6.4 x 4.8 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.24 |
| (ratio) | ||
| Rollei RCP-5324 | Sony Cyber-shot DSC-D700 | |
Surface area:
| 24.84 mm² | vs | 30.72 mm² |
Difference: 5.88 mm² (24%)
D700 sensor is approx. 1.24x bigger than RCP-5324 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 10 years between Rollei RCP-5324 (2008) and Sony D700 (1998).
Ten years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 17.03 µm² (343%)
A pixel on Sony D700 sensor is approx. 343% bigger than a pixel on Rollei RCP-5324.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Rollei RCP-5324
Sony D700
Total megapixels
Effective megapixels
Optical zoom
Yes
5x
Digital zoom
Yes
Yes
ISO sensitivity
Auto
100, 200, 400
RAW
Manual focus
Normal focus range
20 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
36 - 108 mm
28 - 140 mm
Aperture priority
No
Yes
Max. aperture
f2.7 - f4.7
f2.0 - f2.4
Metering
Centre weighted
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/4 EV steps)
Shutter priority
No
Yes
Min. shutter speed
4 sec
Max. shutter speed
1/2000 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
3
Screen size
2.4"
2.5"
Screen resolution
112,300 dots
180,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
PCMCIA (type II), Memory Stick
USB
USB 1.0
HDMI
Wireless
GPS
Battery
2x AA
InfoLithium (NP-F550)
Weight
900 g
Dimensions
89.8 x 61 x 27 mm
130 x 100 x 150 mm
Year
2008
1998
Choose cameras to compare
Popular comparisons:
- Rollei RCP-5324 vs. Rollei Prego dp6000
- Rollei RCP-5324 vs. Sony Cyber-shot DSC-V1
- Rollei RCP-5324 vs. Sony Cyber-shot DSC-D700
- Rollei RCP-5324 vs. Fujifilm FinePix A920
- Rollei RCP-5324 vs. Casio Exilim EX-S10
- Rollei RCP-5324 vs. Panasonic Lumix DMC-TZ18
- Rollei RCP-5324 vs. Canon EOS 4000D
- Rollei RCP-5324 vs. Konica-Minolta DiMAGE Z6
- Rollei RCP-5324 vs. Canon PowerShot A520
- Rollei RCP-5324 vs. Canon PowerShot A540
- Rollei RCP-5324 vs. Canon EOS Rebel T3i
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Rollei RCP-5324 diagonal
The diagonal of RCP-5324 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Sony D700 diagonal
The diagonal of D700 sensor is not 1/2 or 0.5" (12.7 mm) as you might expect, but approximately two thirds of
that value - 8 mm. If you want to know why, see
sensor sizes.
w = 6.40 mm
h = 4.80 mm
w = 6.40 mm
h = 4.80 mm
| Diagonal = √ | 6.40² + 4.80² | = 8.00 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
RCP-5324 sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
D700 sensor area
Width = 6.40 mm
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Height = 4.80 mm
Surface area = 6.40 × 4.80 = 30.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
RCP-5324 pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
| Pixel pitch = | 5.75 | × 1000 | = 2.23 µm |
| 2579 |
D700 pixel pitch
Sensor width = 6.40 mm
Sensor resolution width = 1365 pixels
Sensor resolution width = 1365 pixels
| Pixel pitch = | 6.40 | × 1000 | = 4.69 µm |
| 1365 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
RCP-5324 pixel area
Pixel pitch = 2.23 µm
Pixel area = 2.23² = 4.97 µm²
Pixel area = 2.23² = 4.97 µm²
D700 pixel area
Pixel pitch = 4.69 µm
Pixel area = 4.69² = 22 µm²
Pixel area = 4.69² = 22 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
RCP-5324 pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
Sensor width = 0.575 cm
Pixel density = (2579 / 0.575)² / 1000000 = 20.12 MP/cm²
D700 pixel density
Sensor resolution width = 1365 pixels
Sensor width = 0.64 cm
Pixel density = (1365 / 0.64)² / 1000000 = 4.55 MP/cm²
Sensor width = 0.64 cm
Pixel density = (1365 / 0.64)² / 1000000 = 4.55 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
RCP-5324 sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 4.32 mm
Effective megapixels = 5.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
D700 sensor resolution
Sensor width = 6.40 mm
Sensor height = 4.80 mm
Effective megapixels = 1.40
Resolution horizontal: X × r = 1026 × 1.33 = 1365
Resolution vertical: X = 1026
Sensor resolution = 1365 x 1026
Sensor height = 4.80 mm
Effective megapixels = 1.40
| r = 6.40/4.80 = 1.33 |
|
Resolution vertical: X = 1026
Sensor resolution = 1365 x 1026
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
RCP-5324 crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
D700 crop factor
Sensor diagonal in mm = 8.00 mm
| Crop factor = | 43.27 | = 5.41 |
| 8.00 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
RCP-5324 equivalent aperture
Crop factor = 6.02
Aperture = f2.7 - f4.7
35-mm equivalent aperture = (f2.7 - f4.7) × 6.02 = f16.3 - f28.3
Aperture = f2.7 - f4.7
35-mm equivalent aperture = (f2.7 - f4.7) × 6.02 = f16.3 - f28.3
D700 equivalent aperture
Crop factor = 5.41
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 5.41 = f10.8 - f13
Aperture = f2.0 - f2.4
35-mm equivalent aperture = (f2.0 - f2.4) × 5.41 = f10.8 - f13
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.