Samsung PL51 vs. Canon Digital IXUS 80 IS
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Samsung PL51 | Canon Digital IXUS 80 IS | ||||
| check price » | check price » | ||||
Megapixels
10.30
8.00
Max. image resolution
3648 x 2736
3264 x 2448
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/2.5" (~ 5.75 x 4.32 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1.15 | : | 1 |
| (ratio) | ||
| Samsung PL51 | Canon Digital IXUS 80 IS | |
Surface area:
| 28.46 mm² | vs | 24.84 mm² |
Difference: 3.62 mm² (15%)
PL51 sensor is approx. 1.15x bigger than IXUS 80 IS sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0.34 µm² (12%)
A pixel on Canon IXUS 80 IS sensor is approx. 12% bigger than a pixel on Samsung PL51.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Samsung PL51
Canon IXUS 80 IS
Total megapixels
8.30
Effective megapixels
8.00
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600
Auto, 80, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
80 cm
30 cm
Macro focus range
5 cm
3 cm
Focal length (35mm equiv.)
35 - 105 mm
38 - 114 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.2
f2.8 - f4.9
Metering
Centre weighted, Multi Spot, Spot
Multi, Center-weighted, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
15 sec
Max. shutter speed
1/1500 sec
1/1500 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
6
5
Screen size
2.7"
2.5"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
SD/SDHC/MMC Card
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Li-Ion
NB-4L Li-ion battery
Weight
116 g
165 g
Dimensions
89 x 56.5 x 21.5 mm
87 x 55 x 22 mm
Year
2009
2008
Choose cameras to compare
Popular comparisons:
- Samsung PL51 vs. Canon Digital IXUS 100 IS
- Samsung PL51 vs. Samsung PL50
- Samsung PL51 vs. Minolta DiMAGE 2300
- Samsung PL51 vs. Samsung PL120
- Samsung PL51 vs. Fujifilm FinePix 1400z
- Samsung PL51 vs. Sony Cyber-shot DSC-W12
- Samsung PL51 vs. Sony Cyber-shot DSC-P200
- Samsung PL51 vs. Canon Digital IXUS 80 IS
- Samsung PL51 vs. Samsung PL20
- Samsung PL51 vs. Samsung WB150F
- Samsung PL51 vs. Canon EOS 650D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Samsung PL51 diagonal
The diagonal of PL51 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Canon IXUS 80 IS diagonal
The diagonal of IXUS 80 IS sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of
that value - 7.19 mm. If you want to know why, see
sensor sizes.
w = 5.75 mm
h = 4.32 mm
w = 5.75 mm
h = 4.32 mm
| Diagonal = √ | 5.75² + 4.32² | = 7.19 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
PL51 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
IXUS 80 IS sensor area
Width = 5.75 mm
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Height = 4.32 mm
Surface area = 5.75 × 4.32 = 24.84 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
PL51 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3701 pixels
Sensor resolution width = 3701 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.66 µm |
| 3701 |
IXUS 80 IS pixel pitch
Sensor width = 5.75 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
| Pixel pitch = | 5.75 | × 1000 | = 1.76 µm |
| 3262 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
PL51 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
IXUS 80 IS pixel area
Pixel pitch = 1.76 µm
Pixel area = 1.76² = 3.1 µm²
Pixel area = 1.76² = 3.1 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
PL51 pixel density
Sensor resolution width = 3701 pixels
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
IXUS 80 IS pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
Sensor width = 0.575 cm
Pixel density = (3262 / 0.575)² / 1000000 = 32.18 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
PL51 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.30
Resolution horizontal: X × r = 2783 × 1.33 = 3701
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
Sensor height = 4.62 mm
Effective megapixels = 10.30
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
IXUS 80 IS sensor resolution
Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 4.32 mm
Effective megapixels = 8.00
| r = 5.75/4.32 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
PL51 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
IXUS 80 IS crop factor
Sensor diagonal in mm = 7.19 mm
| Crop factor = | 43.27 | = 6.02 |
| 7.19 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
PL51 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 5.62 = f15.7 - f29.2
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 5.62 = f15.7 - f29.2
IXUS 80 IS equivalent aperture
Crop factor = 6.02
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Aperture = f2.8 - f4.9
35-mm equivalent aperture = (f2.8 - f4.9) × 6.02 = f16.9 - f29.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.