Samsung PL51 vs. Minolta DiMAGE 2300
Comparison
| change cameras » | |||||
|
vs |
|
|||
| Samsung PL51 | Minolta DiMAGE 2300 | ||||
| check price » | check price » | ||||
Megapixels
10.30
2.30
Max. image resolution
3648 x 2736
1792 x 1200
Sensor
Sensor type
CCD
CCD
Sensor size
1/2.3" (~ 6.16 x 4.62 mm)
1/1.7" (~ 7.53 x 5.64 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
|
vs |
|
| 1 | : | 1.49 |
| (ratio) | ||
| Samsung PL51 | Minolta DiMAGE 2300 | |
Surface area:
| 28.46 mm² | vs | 42.47 mm² |
Difference: 14.01 mm² (49%)
DiMAGE 2300 sensor is approx. 1.49x bigger than PL51 sensor.
Note: You are comparing sensors of very different generations.
There is a gap of 9 years between Samsung PL51 (2009) and Minolta DiMAGE 2300 (2000).
Nine years is a lot of time in terms
of technology, meaning newer sensors are overall much more
efficient than the older ones.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 15.64 µm² (567%)
A pixel on Minolta DiMAGE 2300 sensor is approx. 567% bigger than a pixel on Samsung PL51.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Samsung PL51
Minolta DiMAGE 2300
Total megapixels
Effective megapixels
Optical zoom
Yes
1x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 80, 100, 200, 400, 800, 1600
85, 340
RAW
Manual focus
Normal focus range
80 cm
60 cm
Macro focus range
5 cm
30 cm
Focal length (35mm equiv.)
35 - 105 mm
38 mm
Aperture priority
No
No
Max. aperture
f2.8 - f5.2
f3
Metering
Centre weighted, Multi Spot, Spot
Centre weighted
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/2 EV steps)
Shutter priority
No
No
Min. shutter speed
8 sec
2 sec
Max. shutter speed
1/1500 sec
1/500 sec
Built-in flash
External flash
Viewfinder
None
Optical (tunnel)
White balance presets
6
4
Screen size
2.7"
1.8"
Screen resolution
230,000 dots
112,000 dots
Video capture
Max. video resolution
Storage types
SDHC, Secure Digital
CompactFlash type I
USB
USB 2.0 (480 Mbit/sec)
USB 1.0
HDMI
Wireless
GPS
Battery
Li-Ion
AA NiMH (4) batteries (supplied)
Weight
116 g
300 g
Dimensions
89 x 56.5 x 21.5 mm
114 x 65 x 45 mm
Year
2009
2000
Choose cameras to compare
Popular comparisons:
- Samsung PL51 vs. Canon Digital IXUS 100 IS
- Samsung PL51 vs. Samsung PL50
- Samsung PL51 vs. Minolta DiMAGE 2300
- Samsung PL51 vs. Samsung PL120
- Samsung PL51 vs. Fujifilm FinePix 1400z
- Samsung PL51 vs. Sony Cyber-shot DSC-W12
- Samsung PL51 vs. Sony Cyber-shot DSC-P200
- Samsung PL51 vs. Canon Digital IXUS 80 IS
- Samsung PL51 vs. Samsung PL20
- Samsung PL51 vs. Samsung WB150F
- Samsung PL51 vs. Canon EOS 650D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
| Diagonal = √ | w² + h² |
Samsung PL51 diagonal
The diagonal of PL51 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of
that value - 7.7 mm. If you want to know why, see
sensor sizes.
w = 6.16 mm
h = 4.62 mm
w = 6.16 mm
h = 4.62 mm
| Diagonal = √ | 6.16² + 4.62² | = 7.70 mm |
Minolta DiMAGE 2300 diagonal
The diagonal of DiMAGE 2300 sensor is not 1/1.7 or 0.59" (14.9 mm) as you might expect, but approximately two thirds of
that value - 9.41 mm. If you want to know why, see
sensor sizes.
w = 7.53 mm
h = 5.64 mm
w = 7.53 mm
h = 5.64 mm
| Diagonal = √ | 7.53² + 5.64² | = 9.41 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
PL51 sensor area
Width = 6.16 mm
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
Height = 4.62 mm
Surface area = 6.16 × 4.62 = 28.46 mm²
DiMAGE 2300 sensor area
Width = 7.53 mm
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Height = 5.64 mm
Surface area = 7.53 × 5.64 = 42.47 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
| Pixel pitch = | sensor width in mm | × 1000 |
| sensor resolution width in pixels |
PL51 pixel pitch
Sensor width = 6.16 mm
Sensor resolution width = 3701 pixels
Sensor resolution width = 3701 pixels
| Pixel pitch = | 6.16 | × 1000 | = 1.66 µm |
| 3701 |
DiMAGE 2300 pixel pitch
Sensor width = 7.53 mm
Sensor resolution width = 1755 pixels
Sensor resolution width = 1755 pixels
| Pixel pitch = | 7.53 | × 1000 | = 4.29 µm |
| 1755 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
| Pixel area = | sensor surface area in mm² |
| effective megapixels |
PL51 pixel area
Pixel pitch = 1.66 µm
Pixel area = 1.66² = 2.76 µm²
Pixel area = 1.66² = 2.76 µm²
DiMAGE 2300 pixel area
Pixel pitch = 4.29 µm
Pixel area = 4.29² = 18.4 µm²
Pixel area = 4.29² = 18.4 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
| Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
| sensor width in cm |
One could also use this formula:
| Pixel density = | effective megapixels × 1000000 | / 10000 |
| sensor surface area in mm² |
PL51 pixel density
Sensor resolution width = 3701 pixels
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
Sensor width = 0.616 cm
Pixel density = (3701 / 0.616)² / 1000000 = 36.1 MP/cm²
DiMAGE 2300 pixel density
Sensor resolution width = 1755 pixels
Sensor width = 0.753 cm
Pixel density = (1755 / 0.753)² / 1000000 = 5.43 MP/cm²
Sensor width = 0.753 cm
Pixel density = (1755 / 0.753)² / 1000000 = 5.43 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
| (X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
PL51 sensor resolution
Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 10.30
Resolution horizontal: X × r = 2783 × 1.33 = 3701
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
Sensor height = 4.62 mm
Effective megapixels = 10.30
| r = 6.16/4.62 = 1.33 |
|
Resolution vertical: X = 2783
Sensor resolution = 3701 x 2783
DiMAGE 2300 sensor resolution
Sensor width = 7.53 mm
Sensor height = 5.64 mm
Effective megapixels = 2.30
Resolution horizontal: X × r = 1310 × 1.34 = 1755
Resolution vertical: X = 1310
Sensor resolution = 1755 x 1310
Sensor height = 5.64 mm
Effective megapixels = 2.30
| r = 7.53/5.64 = 1.34 |
|
Resolution vertical: X = 1310
Sensor resolution = 1755 x 1310
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
| Crop factor = | 43.27 mm |
| sensor diagonal in mm |
PL51 crop factor
Sensor diagonal in mm = 7.70 mm
| Crop factor = | 43.27 | = 5.62 |
| 7.70 |
DiMAGE 2300 crop factor
Sensor diagonal in mm = 9.41 mm
| Crop factor = | 43.27 | = 4.6 |
| 9.41 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
PL51 equivalent aperture
Crop factor = 5.62
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 5.62 = f15.7 - f29.2
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 5.62 = f15.7 - f29.2
DiMAGE 2300 equivalent aperture
Crop factor = 4.6
Aperture = f3
35-mm equivalent aperture = (f3) × 4.6 = f13.8
Aperture = f3
35-mm equivalent aperture = (f3) × 4.6 = f13.8
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.