Sony Alpha A99 II vs. Nikon D810

Comparison

change cameras »
Alpha A99 II image
vs
D810 image
Sony Alpha A99 II Nikon D810
check price » check price »
Megapixels
42.40
36.30
Max. image resolution
7952 x 5304
7360 x 4912

Sensor

Sensor type
CMOS
CMOS
Sensor size
35.9 x 24 mm
35.9 x 24 mm
Sensor resolution
7976 x 5317
7379 x 4919
Diagonal
43.18 mm
43.18 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1
(ratio)
Sony Alpha A99 II Nikon D810
Surface area:
861.60 mm² vs 861.60 mm²
Difference: 0 mm² (0%)
Alpha A99 II and D810 sensors are the same size.
Note: You are comparing cameras of different generations. There is a 2 year gap between Sony Alpha A99 II (2016) and Nikon D810 (2014). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
4.5 µm
4.87 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.37 µm (8%)
Pixel pitch of D810 is approx. 8% higher than pixel pitch of Alpha A99 II.
Pixel area
20.25 µm²
23.72 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 3.47 µm² (17%)
A pixel on Nikon D810 sensor is approx. 17% bigger than a pixel on Sony Alpha A99 II.
Pixel density
4.94 MP/cm²
4.22 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 0.72 µm (17%)
Sony Alpha A99 II has approx. 17% higher pixel density than Nikon D810.
To learn about the accuracy of these numbers, click here.



Specs

Sony Alpha A99 II
Nikon D810
Crop factor
1
1
Total megapixels
43.60
37.09
Effective megapixels
42.40
36.30
Optical zoom
 
Digital zoom
Yes
ISO sensitivity
Auto, 100-25600 (expandable to 50-102400)
Auto, 64-12800 (expands to 51200)
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Max. aperture (35mm equiv.)
n/a
n/a
Metering
Multi, Center-weighted, Spot
Multi, Center-weighted, Spot, Highlight-weighted
Exposure compensation
±5 EV (in 1/3 EV, 1/2 EV steps)
±5 EV (in 1/3 EV, 1/2 EV, 1 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
30 sec
Max. shutter speed
1/8000 sec
1/8000 sec
Built-in flash
External flash
Viewfinder
Electronic
Optical (pentaprism)
White balance presets
10
12
Screen size
3"
3.2"
Screen resolution
1,228,800 dots
1,228,800 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
1920x1080 (60p/50p/30p/25p/24p)
Storage types
SD/SDHC/SDXC/MS PRO Duo
SD/SDHC/SDXC/Type I CompactFlash
USB
USB 2.0 (480 Mbit/sec)
USB 3.0 (5 GBit/sec)
HDMI
Wireless
GPS
Battery
NP-FM500H lithium-ion battery
EN-EL15 Rechargeable Li-ion Battery
Weight
849 g
980 g
Dimensions
142.6 x 104.2 x 76.1 mm
146 x 123 x 81.5 mm
Year
2016
2014




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Sony Alpha A99 II diagonal

w = 35.90 mm
h = 24.00 mm
Diagonal =  35.90² + 24.00²   = 43.18 mm

Nikon D810 diagonal

w = 35.90 mm
h = 24.00 mm
Diagonal =  35.90² + 24.00²   = 43.18 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

Alpha A99 II sensor area

Width = 35.90 mm
Height = 24.00 mm

Surface area = 35.90 × 24.00 = 861.60 mm²

D810 sensor area

Width = 35.90 mm
Height = 24.00 mm

Surface area = 35.90 × 24.00 = 861.60 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

Alpha A99 II pixel pitch

Sensor width = 35.90 mm
Sensor resolution width = 7976 pixels
Pixel pitch =   35.90  × 1000  = 4.5 µm
7976

D810 pixel pitch

Sensor width = 35.90 mm
Sensor resolution width = 7379 pixels
Pixel pitch =   35.90  × 1000  = 4.87 µm
7379


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

Alpha A99 II pixel area

Pixel pitch = 4.5 µm

Pixel area = 4.5² = 20.25 µm²

D810 pixel area

Pixel pitch = 4.87 µm

Pixel area = 4.87² = 23.72 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

Alpha A99 II pixel density

Sensor resolution width = 7976 pixels
Sensor width = 3.59 cm

Pixel density = (7976 / 3.59)² / 1000000 = 4.94 MP/cm²

D810 pixel density

Sensor resolution width = 7379 pixels
Sensor width = 3.59 cm

Pixel density = (7379 / 3.59)² / 1000000 = 4.22 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

Alpha A99 II sensor resolution

Sensor width = 35.90 mm
Sensor height = 24.00 mm
Effective megapixels = 42.40
r = 35.90/24.00 = 1.5
X =  42.40 × 1000000  = 5317
1.5
Resolution horizontal: X × r = 5317 × 1.5 = 7976
Resolution vertical: X = 5317

Sensor resolution = 7976 x 5317

D810 sensor resolution

Sensor width = 35.90 mm
Sensor height = 24.00 mm
Effective megapixels = 36.30
r = 35.90/24.00 = 1.5
X =  36.30 × 1000000  = 4919
1.5
Resolution horizontal: X × r = 4919 × 1.5 = 7379
Resolution vertical: X = 4919

Sensor resolution = 7379 x 4919


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


Alpha A99 II crop factor

Sensor diagonal in mm = 43.18 mm
Crop factor =   43.27  = 1
43.18

D810 crop factor

Sensor diagonal in mm = 43.18 mm
Crop factor =   43.27  = 1
43.18

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

Alpha A99 II equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Sony Alpha A99 II, take the aperture of the lens you're using and multiply it with crop factor.

Since crop factor for Sony Alpha A99 II is 1, the equivalent aperture is aperture.

D810 equivalent aperture

Aperture is a lens characteristic, so it's calculated only for fixed lens cameras. If you want to know the equivalent aperture for Nikon D810, take the aperture of the lens you're using and multiply it with crop factor.

Since crop factor for Nikon D810 is 1, the equivalent aperture is aperture.

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.