Sony Alpha DSLR-A200 vs. Canon EOS 1000D
Comparison
change cameras » | |||||
|
vs |
|
|||
Sony Alpha DSLR-A200 | Canon EOS 1000D | ||||
check price » | check price » |
Megapixels
10.20
10.10
Max. image resolution
3872 x 2592
3888 x 2592
Sensor
Sensor type
CCD
CMOS
Sensor size
23.6 x 15.8 mm
22.2 x 14.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1.13 | : | 1 |
(ratio) | ||
Sony Alpha DSLR-A200 | Canon EOS 1000D |
Surface area:
372.88 mm² | vs | 328.56 mm² |
Difference: 44.32 mm² (13%)
Alpha DSLR-A200 sensor is approx. 1.13x bigger than 1000D sensor.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.11 µm² (13%)
A pixel on Sony Alpha DSLR-A200 sensor is approx. 13% bigger than a pixel on Canon 1000D.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony Alpha DSLR-A200
Canon 1000D
Total megapixels
10.80
10.50
Effective megapixels
10.20
10.10
Optical zoom
Digital zoom
No
No
ISO sensitivity
Auto, 100, 200, 400, 800, 1600, 3200
Auto, 100, 200, 400, 800, 1600
RAW
Manual focus
Normal focus range
Macro focus range
Focal length (35mm equiv.)
Aperture priority
Yes
Yes
Max. aperture
Metering
Multi, Center-weighted, Spot
Centre weighted, Evaluative 35-zone SPC
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV, 1/2 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
Bulb+30 sec
Max. shutter speed
1/4000 sec
1/4000 sec
Built-in flash
External flash
Viewfinder
Optical (pentamirror)
Optical (pentamirror)
White balance presets
6
6
Screen size
2.7"
2.5"
Screen resolution
230,000 dots
230,000 dots
Video capture
Max. video resolution
Storage types
Compact Flash
SDHC, Secure Digital
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
Lithium-Ion (NP-BG1)
Lithium-Ion BP-511A rechargeable battery
Weight
572 g
502 g
Dimensions
131 x 99 x 71 mm
126 x 98 x 62 mm
Year
2008
2008
Choose cameras to compare
Popular comparisons:
- Sony Alpha DSLR-A200 vs. Canon EOS 450D
- Sony Alpha DSLR-A200 vs. Nikon D3100
- Sony Alpha DSLR-A200 vs. Canon EOS 400D
- Sony Alpha DSLR-A200 vs. Nokia 808 PureView
- Sony Alpha DSLR-A200 vs. Nikon D3000
- Sony Alpha DSLR-A200 vs. Sony Alpha SLT-A58
- Sony Alpha DSLR-A200 vs. Sony Alpha SLT-A37
- Sony Alpha DSLR-A200 vs. Canon EOS Rebel T3i
- Sony Alpha DSLR-A200 vs. Canon EOS 350D
- Sony Alpha DSLR-A200 vs. Nikon D60
- Sony Alpha DSLR-A200 vs. Canon EOS 1000D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Sony Alpha DSLR-A200 diagonal
w = 23.60 mm
h = 15.80 mm
h = 15.80 mm
Diagonal = √ | 23.60² + 15.80² | = 28.40 mm |
Canon 1000D diagonal
w = 22.20 mm
h = 14.80 mm
h = 14.80 mm
Diagonal = √ | 22.20² + 14.80² | = 26.68 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Alpha DSLR-A200 sensor area
Width = 23.60 mm
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
Height = 15.80 mm
Surface area = 23.60 × 15.80 = 372.88 mm²
1000D sensor area
Width = 22.20 mm
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Height = 14.80 mm
Surface area = 22.20 × 14.80 = 328.56 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Alpha DSLR-A200 pixel pitch
Sensor width = 23.60 mm
Sensor resolution width = 3898 pixels
Sensor resolution width = 3898 pixels
Pixel pitch = | 23.60 | × 1000 | = 6.05 µm |
3898 |
1000D pixel pitch
Sensor width = 22.20 mm
Sensor resolution width = 3893 pixels
Sensor resolution width = 3893 pixels
Pixel pitch = | 22.20 | × 1000 | = 5.7 µm |
3893 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Alpha DSLR-A200 pixel area
Pixel pitch = 6.05 µm
Pixel area = 6.05² = 36.6 µm²
Pixel area = 6.05² = 36.6 µm²
1000D pixel area
Pixel pitch = 5.7 µm
Pixel area = 5.7² = 32.49 µm²
Pixel area = 5.7² = 32.49 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Alpha DSLR-A200 pixel density
Sensor resolution width = 3898 pixels
Sensor width = 2.36 cm
Pixel density = (3898 / 2.36)² / 1000000 = 2.73 MP/cm²
Sensor width = 2.36 cm
Pixel density = (3898 / 2.36)² / 1000000 = 2.73 MP/cm²
1000D pixel density
Sensor resolution width = 3893 pixels
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor width = 2.22 cm
Pixel density = (3893 / 2.22)² / 1000000 = 3.08 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Alpha DSLR-A200 sensor resolution
Sensor width = 23.60 mm
Sensor height = 15.80 mm
Effective megapixels = 10.20
Resolution horizontal: X × r = 2616 × 1.49 = 3898
Resolution vertical: X = 2616
Sensor resolution = 3898 x 2616
Sensor height = 15.80 mm
Effective megapixels = 10.20
r = 23.60/15.80 = 1.49 |
|
Resolution vertical: X = 2616
Sensor resolution = 3898 x 2616
1000D sensor resolution
Sensor width = 22.20 mm
Sensor height = 14.80 mm
Effective megapixels = 10.10
Resolution horizontal: X × r = 2595 × 1.5 = 3893
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Sensor height = 14.80 mm
Effective megapixels = 10.10
r = 22.20/14.80 = 1.5 |
|
Resolution vertical: X = 2595
Sensor resolution = 3893 x 2595
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Alpha DSLR-A200 crop factor
Sensor diagonal in mm = 28.40 mm
Crop factor = | 43.27 | = 1.52 |
28.40 |
1000D crop factor
Sensor diagonal in mm = 26.68 mm
Crop factor = | 43.27 | = 1.62 |
26.68 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Alpha DSLR-A200 equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Sony Alpha DSLR-A200, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Sony Alpha DSLR-A200 is 1.52
Crop factor for Sony Alpha DSLR-A200 is 1.52
1000D equivalent aperture
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Canon 1000D, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Canon 1000D is 1.62
Crop factor for Canon 1000D is 1.62
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.