Sony Cyber-shot DSC-RX100 VII vs. Panasonic Lumix DC-TZ200
Comparison
change cameras » | |||||
|
vs |
|
|||
Sony Cyber-shot DSC-RX100 VII | Panasonic Lumix DC-TZ200 | ||||
check price » | check price » |
Megapixels
20.10
20.10
Max. image resolution
5472 x 3648
5472 x 3648
Sensor
Sensor type
CMOS
CMOS
Sensor size
13.2 x 8.8 mm
13.2 x 8.8 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Sony Cyber-shot DSC-RX100 VII | Panasonic Lumix DC-TZ200 |
Surface area:
116.16 mm² | vs | 116.16 mm² |
Difference: 0 mm² (0%)
RX100 VII and Lumix DC-TZ200 sensors are the same size.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 0 µm² (0%)
Sony RX100 VII and Panasonic Lumix DC-TZ200 have the same pixel area.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Sony RX100 VII
Panasonic Lumix DC-TZ200
Total megapixels
20.90
Effective megapixels
20.10
20.10
Optical zoom
8x
15x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 125-12800 (extends to 64-25600)
Auto, 125-12800 (extends to 80-25600)
RAW
Manual focus
Normal focus range
8 cm
50 cm
Macro focus range
3 cm
Focal length (35mm equiv.)
24 - 200 mm
24 - 360 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8 - f4.5
f3.3 - f6.4
Metering
Multi, Center-weighted, Highlight-weighted, Average, Spot
Multi, Center-weighted, Spot
Exposure compensation
±3 EV (in 1/3 EV steps)
±5 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
30 sec
60 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Electronic
Electronic
White balance presets
8
5
Screen size
3"
3"
Screen resolution
921,600 dots
1,240,000 dots
Video capture
Max. video resolution
3840x2160 (30p/25p/24p)
3840x2160 (30p/24p)
Storage types
SD/ SDHC/SDXC, MS Pro Duo
SD/SDHC/SDXC
USB
USB 2.0 (480 Mbit/sec)
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
NP-BX1 lithium-ion battery
Lithium-ion battery
Weight
302 g
340 g
Dimensions
101.6 x 58.1 x 42.8 mm
111.2 x 66.4 x 45.2 mm
Year
2019
2018
Choose cameras to compare
Popular comparisons:
- Sony Cyber-shot DSC-RX100 VII vs. Panasonic Lumix DC-TZ200
- Sony Cyber-shot DSC-RX100 VII vs. Panasonic Lumix DC-LX100 II
- Sony Cyber-shot DSC-RX100 VII vs. Canon PowerShot G5 X Mark II
- Sony Cyber-shot DSC-RX100 VII vs. Sony Alpha a6400
- Sony Cyber-shot DSC-RX100 VII vs. Sony Cyber-shot DSC-HX99
- Sony Cyber-shot DSC-RX100 VII vs. Panasonic Lumix DC-ZS200
- Sony Cyber-shot DSC-RX100 VII vs. Sony Cyber-shot DSC-RX10 IV
- Sony Cyber-shot DSC-RX100 VII vs. Canon PowerShot G7 X Mark II
- Sony Cyber-shot DSC-RX100 VII vs. Panasonic Lumix DMC-LX15
- Sony Cyber-shot DSC-RX100 VII vs. Canon PowerShot G7 X Mark III
- Sony Cyber-shot DSC-RX100 VII vs. Canon PowerShot SX740 HS
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Sony RX100 VII diagonal
w = 13.20 mm
h = 8.80 mm
h = 8.80 mm
Diagonal = √ | 13.20² + 8.80² | = 15.86 mm |
Panasonic Lumix DC-TZ200 diagonal
w = 13.20 mm
h = 8.80 mm
h = 8.80 mm
Diagonal = √ | 13.20² + 8.80² | = 15.86 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
RX100 VII sensor area
Width = 13.20 mm
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Lumix DC-TZ200 sensor area
Width = 13.20 mm
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Height = 8.80 mm
Surface area = 13.20 × 8.80 = 116.16 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
RX100 VII pixel pitch
Sensor width = 13.20 mm
Sensor resolution width = 5492 pixels
Sensor resolution width = 5492 pixels
Pixel pitch = | 13.20 | × 1000 | = 2.4 µm |
5492 |
Lumix DC-TZ200 pixel pitch
Sensor width = 13.20 mm
Sensor resolution width = 5492 pixels
Sensor resolution width = 5492 pixels
Pixel pitch = | 13.20 | × 1000 | = 2.4 µm |
5492 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
RX100 VII pixel area
Pixel pitch = 2.4 µm
Pixel area = 2.4² = 5.76 µm²
Pixel area = 2.4² = 5.76 µm²
Lumix DC-TZ200 pixel area
Pixel pitch = 2.4 µm
Pixel area = 2.4² = 5.76 µm²
Pixel area = 2.4² = 5.76 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
RX100 VII pixel density
Sensor resolution width = 5492 pixels
Sensor width = 1.32 cm
Pixel density = (5492 / 1.32)² / 1000000 = 17.31 MP/cm²
Sensor width = 1.32 cm
Pixel density = (5492 / 1.32)² / 1000000 = 17.31 MP/cm²
Lumix DC-TZ200 pixel density
Sensor resolution width = 5492 pixels
Sensor width = 1.32 cm
Pixel density = (5492 / 1.32)² / 1000000 = 17.31 MP/cm²
Sensor width = 1.32 cm
Pixel density = (5492 / 1.32)² / 1000000 = 17.31 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
RX100 VII sensor resolution
Sensor width = 13.20 mm
Sensor height = 8.80 mm
Effective megapixels = 20.10
Resolution horizontal: X × r = 3661 × 1.5 = 5492
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Sensor height = 8.80 mm
Effective megapixels = 20.10
r = 13.20/8.80 = 1.5 |
|
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Lumix DC-TZ200 sensor resolution
Sensor width = 13.20 mm
Sensor height = 8.80 mm
Effective megapixels = 20.10
Resolution horizontal: X × r = 3661 × 1.5 = 5492
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Sensor height = 8.80 mm
Effective megapixels = 20.10
r = 13.20/8.80 = 1.5 |
|
Resolution vertical: X = 3661
Sensor resolution = 5492 x 3661
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
RX100 VII crop factor
Sensor diagonal in mm = 15.86 mm
Crop factor = | 43.27 | = 2.73 |
15.86 |
Lumix DC-TZ200 crop factor
Sensor diagonal in mm = 15.86 mm
Crop factor = | 43.27 | = 2.73 |
15.86 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
RX100 VII equivalent aperture
Crop factor = 2.73
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 2.73 = f7.6 - f12.3
Aperture = f2.8 - f4.5
35-mm equivalent aperture = (f2.8 - f4.5) × 2.73 = f7.6 - f12.3
Lumix DC-TZ200 equivalent aperture
Crop factor = 2.73
Aperture = f3.3 - f6.4
35-mm equivalent aperture = (f3.3 - f6.4) × 2.73 = f9 - f17.5
Aperture = f3.3 - f6.4
35-mm equivalent aperture = (f3.3 - f6.4) × 2.73 = f9 - f17.5
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.