Sony Cyber-shot DSC-F55v vs. Sony Cyber-shot DSC-F828

Comparison

change cameras »
Cyber-shot DSC-F55v image
vs
Cyber-shot DSC-F828 image
Sony Cyber-shot DSC-F55v Sony Cyber-shot DSC-F828
check price » check price »
Megapixels
3.34
8.00
Max. image resolution
2240 x 1680
3264 x 2448

Sensor

Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
2/3" (~ 8.8 x 6.6 mm)
Sensor resolution
2108 x 1585
3262 x 2453
Diagonal
8.89 mm
11.00 mm
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »
vs
1 : 1.53
(ratio)
Sony Cyber-shot DSC-F55v Sony Cyber-shot DSC-F828
Surface area:
37.90 mm² vs 58.08 mm²
Difference: 20.18 mm² (53%)
F828 sensor is approx. 1.53x bigger than F55v sensor.
Note: You are comparing cameras of different generations. There is a 3 year gap between Sony F55v (2000) and Sony F828 (2003). All things being equal, newer sensor generations generally outperform the older.
Pixel pitch
3.37 µm
2.7 µm
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Difference: 0.67 µm (25%)
Pixel pitch of F55v is approx. 25% higher than pixel pitch of F828.
Pixel area
11.36 µm²
7.29 µm²
Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 4.07 µm² (56%)
A pixel on Sony F55v sensor is approx. 56% bigger than a pixel on Sony F828.
Pixel density
8.79 MP/cm²
13.74 MP/cm²
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Difference: 4.95 µm (56%)
Sony F828 has approx. 56% higher pixel density than Sony F55v.
To learn about the accuracy of these numbers, click here.



Specs

Sony F55v
Sony F828
Crop factor
4.87
3.93
Total megapixels
Effective megapixels
Optical zoom
1x
7.1x
Digital zoom
Yes
Yes
ISO sensitivity
100
Auto, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
25 cm
50 cm
Macro focus range
10 cm
2 cm
Focal length (35mm equiv.)
37 mm
28 - 200 mm
Aperture priority
Yes
Yes
Max. aperture
f2.8
f2.0 - f2.8
Max. aperture (35mm equiv.)
f13.6
f7.9 - f11
Metering
Centre weighted, Spot
Centre weighted, Multi-segment, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
Yes
Yes
Min. shutter speed
8 sec
30 sec
Max. shutter speed
1/1000 sec
1/3200 sec
Built-in flash
External flash
Viewfinder
None
Electronic
White balance presets
5
7
Screen size
2"
1.8"
Screen resolution
123,000 dots
134,000 dots
Video capture
Max. video resolution
Storage types
Memory Stick
CompactFlash type I, CompactFlash type II, Memory Stick, Memory
USB
USB 1.0
USB 2.0 (480 Mbit/sec)
HDMI
Wireless
GPS
Battery
InfoLithium (NP-FS11)
AAA (2) batteries NiMH supplied
Weight
280 g
832 g
Dimensions
103 x 79 x 48 mm
134 x 91 x 156 mm
Year
2000
2003




Choose cameras to compare

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height

Sony F55v diagonal

The diagonal of F55v sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of that value - 8.89 mm. If you want to know why, see sensor sizes.

w = 7.11 mm
h = 5.33 mm
Diagonal =  7.11² + 5.33²   = 8.89 mm

Sony F828 diagonal

The diagonal of F828 sensor is not 2/3 or 0.67" (16.9 mm) as you might expect, but approximately two thirds of that value - 11 mm. If you want to know why, see sensor sizes.

w = 8.80 mm
h = 6.60 mm
Diagonal =  8.80² + 6.60²   = 11.00 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

F55v sensor area

Width = 7.11 mm
Height = 5.33 mm

Surface area = 7.11 × 5.33 = 37.90 mm²

F828 sensor area

Width = 8.80 mm
Height = 6.60 mm

Surface area = 8.80 × 6.60 = 58.08 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

F55v pixel pitch

Sensor width = 7.11 mm
Sensor resolution width = 2108 pixels
Pixel pitch =   7.11  × 1000  = 3.37 µm
2108

F828 pixel pitch

Sensor width = 8.80 mm
Sensor resolution width = 3262 pixels
Pixel pitch =   8.80  × 1000  = 2.7 µm
3262


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

F55v pixel area

Pixel pitch = 3.37 µm

Pixel area = 3.37² = 11.36 µm²

F828 pixel area

Pixel pitch = 2.7 µm

Pixel area = 2.7² = 7.29 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

One could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

F55v pixel density

Sensor resolution width = 2108 pixels
Sensor width = 0.711 cm

Pixel density = (2108 / 0.711)² / 1000000 = 8.79 MP/cm²

F828 pixel density

Sensor resolution width = 3262 pixels
Sensor width = 0.88 cm

Pixel density = (3262 / 0.88)² / 1000000 = 13.74 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

F55v sensor resolution

Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 3.34
r = 7.11/5.33 = 1.33
X =  3.34 × 1000000  = 1585
1.33
Resolution horizontal: X × r = 1585 × 1.33 = 2108
Resolution vertical: X = 1585

Sensor resolution = 2108 x 1585

F828 sensor resolution

Sensor width = 8.80 mm
Sensor height = 6.60 mm
Effective megapixels = 8.00
r = 8.80/6.60 = 1.33
X =  8.00 × 1000000  = 2453
1.33
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453

Sensor resolution = 3262 x 2453


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


F55v crop factor

Sensor diagonal in mm = 8.89 mm
Crop factor =   43.27  = 4.87
8.89

F828 crop factor

Sensor diagonal in mm = 11.00 mm
Crop factor =   43.27  = 3.93
11.00

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

F55v equivalent aperture

Crop factor = 4.87
Aperture = f2.8

35-mm equivalent aperture = (f2.8) × 4.87 = f13.6

F828 equivalent aperture

Crop factor = 3.93
Aperture = f2.0 - f2.8

35-mm equivalent aperture = (f2.0 - f2.8) × 3.93 = f7.9 - f11

Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.