Yakumo Mega Image 410 vs. Canon PowerShot A75

Comparison

change cameras »

Yakumo Mega Image 410

Canon PowerShot A75

check price »

Megapixels

4.10

3.10

Max. image resolution

2304 x 1728

2048 x 1536

Sensor

Sensor type

CCD

Sensor size

1/2.5" (~ 5.75 x 4.32 mm)

1/2.7" (~ 5.33 x 4 mm)

Sensor resolution

2335 x 1756

2031 x 1527

Diagonal

7.19 mm

6.66 mm

Sensor size comparison

Sensor size is generally a good indicator of the quality of the camera. Sensors can vary greatly in size. As a general rule, the bigger the sensor, the better the image quality.

Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.

Learn more about sensor sizes »

Actual sensor size

Note: Actual size is set to screen → change »

	vs
1.17	:	1
(ratio)

Yakumo Mega Image 410		Canon PowerShot A75

Surface area:

24.84 mm²

21.32 mm²

Difference: 3.52 mm² (17%)

410 sensor is approx. 1.17x bigger than A75 sensor.

Pixel pitch

2.46 µm

2.62 µm

Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.

The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.

Difference: 0.16 µm (7%)

Pixel pitch of A75 is approx. 7% higher than pixel pitch of 410.

Pixel area

6.05 µm²

6.86 µm²

Pixel or photosite area affects how much light per pixel can be gathered. The larger it is the more light can be collected by a single pixel.

Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.

Relative pixel sizes:

Pixel area difference: 0.81 µm² (13%)

A pixel on Canon A75 sensor is approx. 13% bigger than a pixel on Yakumo 410.

Pixel density

16.49 MP/cm²

14.52 MP/cm²

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor.

Higher pixel density means smaller pixels and lower pixel density means larger pixels.

Difference: 1.97 µm (14%)

Yakumo 410 has approx. 14% higher pixel density than Canon A75.

To learn about the accuracy of these numbers, click here.

Specs

Yakumo 410

Canon A75

Crop factor

6.02

6.5

Total megapixels

3.30

Effective megapixels

3.10

Optical zoom

Yes

Digital zoom

Yes

ISO sensitivity

Auto, 100, 200

Auto, 50, 100, 200, 400

RAW

Manual focus

Normal focus range

30 cm

46 cm

Macro focus range

10 cm

5 cm

Focal length (35mm equiv.)

36 - 288 mm

35 - 105 mm

Aperture priority

Yes

Max. aperture

f3.2 - f3.4

f2.8 - f4.8

Max. aperture (35mm equiv.)

f19.3 - f20.5

f18.2 - f31.2

Metering

Centre weighted

Centre weighted, Evaluative, Spot

Exposure compensation

±2 EV (in 1/3 EV steps)

Shutter priority

Yes

Min. shutter speed

8 sec

15 sec

Max. shutter speed

1/1000 sec

1/2000 sec

Built-in flash

External flash

Viewfinder

Electronic

Optical (tunnel)

White balance presets

Screen size

1.6"

1.8"

Screen resolution

71,760 dots

118,000 dots

Video capture

Max. video resolution

Storage types

Secure Digital

CompactFlash type I

USB

USB 1.1

USB 1.0

HDMI

Wireless

GPS

Battery

4x AAA

AA (4) batteries (NiMH recommended)

Weight

270 g

200 g

Dimensions

123 x 64 x 46 mm

101 x 64 x 32 mm

Year

2005

2004

Choose cameras to compare

Popular comparisons:

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:

Diagonal = √

w² + h²

where w = sensor width and h = sensor height

Yakumo 410 diagonal

The diagonal of 410 sensor is not 1/2.5 or 0.4" (10.2 mm) as you might expect, but approximately two thirds of that value - 7.19 mm. If you want to know why, see sensor sizes.

w = 5.75 mm
h = 4.32 mm

Diagonal = √

5.75² + 4.32²

= 7.19 mm

Canon A75 diagonal

The diagonal of A75 sensor is not 1/2.7 or 0.37" (9.4 mm) as you might expect, but approximately two thirds of that value - 6.66 mm. If you want to know why, see sensor sizes.

w = 5.33 mm
h = 4.00 mm

Diagonal = √

5.33² + 4.00²

= 6.66 mm

Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

410 sensor area

Width = 5.75 mm
Height = 4.32 mm

Surface area = 5.75 × 4.32 = 24.84 mm²

A75 sensor area

Width = 5.33 mm
Height = 4.00 mm

Surface area = 5.33 × 4.00 = 21.32 mm²

Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:

Pixel pitch =	sensor width in mm	× 1000
	sensor resolution width in pixels

410 pixel pitch

Sensor width = 5.75 mm
Sensor resolution width = 2335 pixels

Pixel pitch =	5.75	× 1000	= 2.46 µm
	2335

A75 pixel pitch

Sensor width = 5.33 mm
Sensor resolution width = 2031 pixels

Pixel pitch =	5.33	× 1000	= 2.62 µm
	2031

Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:

Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:

Pixel area =	sensor surface area in mm²
	effective megapixels

410 pixel area

Pixel pitch = 2.46 µm

Pixel area = 2.46² = 6.05 µm²

A75 pixel area

Pixel pitch = 2.62 µm

Pixel area = 2.62² = 6.86 µm²

Pixel density

Pixel density can be calculated with the following formula:

Pixel density = (	sensor resolution width in pixels	)² / 1000000
	sensor width in cm

One could also use this formula:

Pixel density =	effective megapixels × 1000000	/ 10000
	sensor surface area in mm²

410 pixel density

Sensor resolution width = 2335 pixels
Sensor width = 0.575 cm

Pixel density = (2335 / 0.575)² / 1000000 = 16.49 MP/cm²

A75 pixel density

Sensor resolution width = 2031 pixels
Sensor width = 0.533 cm

Pixel density = (2031 / 0.533)² / 1000000 = 14.52 MP/cm²

Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:

(X × r) × X = effective megapixels × 1000000 →

X = √	effective megapixels × 1000000
	r

3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

410 sensor resolution

Sensor width = 5.75 mm
Sensor height = 4.32 mm
Effective megapixels = 4.10

r = 5.75/4.32 = 1.33

X = √	4.10 × 1000000	= 1756
	1.33

Resolution horizontal: X × r = 1756 × 1.33 = 2335
Resolution vertical: X = 1756

Sensor resolution = 2335 x 1756

A75 sensor resolution

Sensor width = 5.33 mm
Sensor height = 4.00 mm
Effective megapixels = 3.10

r = 5.33/4.00 = 1.33

X = √	3.10 × 1000000	= 1527
	1.33

Resolution horizontal: X × r = 1527 × 1.33 = 2031
Resolution vertical: X = 1527

Sensor resolution = 2031 x 1527

Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.

Crop factor =	43.27 mm
	sensor diagonal in mm

410 crop factor

Sensor diagonal in mm = 7.19 mm

Crop factor =	43.27	= 6.02
	7.19

A75 crop factor

Sensor diagonal in mm = 6.66 mm

Crop factor =	43.27	= 6.5
	6.66

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

410 equivalent aperture

Crop factor = 6.02
Aperture = f3.2 - f3.4

35-mm equivalent aperture = (f3.2 - f3.4) × 6.02 = f19.3 - f20.5

A75 equivalent aperture

Crop factor = 6.5
Aperture = f2.8 - f4.8

35-mm equivalent aperture = (f2.8 - f4.8) × 6.5 = f18.2 - f31.2

Enter your screen size (diagonal)

My screen size is inches

Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.