Yakumo Mega Image 811x vs. Kyocera Finecam S5R
Comparison
change cameras » | |||||
|
vs |
|
|||
Yakumo Mega Image 811x | Kyocera Finecam S5R | ||||
check price » | check price » |
Megapixels
8.00
5.00
Max. image resolution
3296 x 2472
2560 x 1920
Sensor
Sensor type
CCD
CCD
Sensor size
1/1.8" (~ 7.11 x 5.33 mm)
1/1.8" (~ 7.11 x 5.33 mm)
Sensor size comparison
Sensor size is generally a good indicator of the quality of the camera.
Sensors can vary greatly in size. As a general rule, the bigger the
sensor, the better the image quality.
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Bigger sensors are more effective because they have more surface area to capture light. An important factor when comparing digital cameras is also camera generation. Generally, newer sensors will outperform the older.
Learn more about sensor sizes »
Actual sensor size
Note: Actual size is set to screen → change »
|
vs |
|
1 | : | 1 |
(ratio) | ||
Yakumo Mega Image 811x | Kyocera Finecam S5R |
Surface area:
37.90 mm² | vs | 37.90 mm² |
Difference: 0 mm² (0%)
811x and S5R sensors are the same size.
Note: You are comparing cameras of different generations.
There is a 3 year gap between Yakumo 811x (2006) and Kyocera S5R (2003).
All things being equal, newer sensor generations generally outperform the older.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next. It tells you how close the pixels are to each other.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
The bigger the pixel pitch, the further apart they are and the bigger each pixel is. Bigger pixels tend to have better signal to noise ratio and greater dynamic range.
Pixel or photosite area affects how much light per pixel can be gathered.
The larger it is the more light can be collected by a single pixel.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Larger pixels have the potential to collect more photons, resulting in greater dynamic range, while smaller pixels provide higher resolutions (more detail) for a given sensor size.
Relative pixel sizes:
vs
Pixel area difference: 2.87 µm² (60%)
A pixel on Kyocera S5R sensor is approx. 60% bigger than a pixel on Yakumo 811x.
Pixel density tells you how many million pixels fit or would fit in one
square cm of the sensor.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
Higher pixel density means smaller pixels and lower pixel density means larger pixels.
To learn about the accuracy of these numbers,
click here.
Specs
Yakumo 811x
Kyocera S5R
Total megapixels
Effective megapixels
Optical zoom
Yes
3x
Digital zoom
Yes
Yes
ISO sensitivity
Auto, 100, 200, 400
Auto, 100, 200, 400, 800
RAW
Manual focus
Normal focus range
40 cm
60 cm
Macro focus range
5 cm
17 cm
Focal length (35mm equiv.)
38 - 114 mm
35 - 105 mm
Aperture priority
No
Yes
Max. aperture
f2.8 - f5.2
f2.8 - f4.8
Metering
Centre weighted, Multi-segment, Spot
Centre weighted, Evaluative, Spot
Exposure compensation
±2 EV (in 1/3 EV steps)
±2 EV (in 1/3 EV steps)
Shutter priority
No
No
Min. shutter speed
2 sec
8 sec
Max. shutter speed
1/2000 sec
1/2000 sec
Built-in flash
External flash
Viewfinder
Optical
Optical (tunnel)
White balance presets
6
6
Screen size
2"
1.6"
Screen resolution
70,000 dots
Video capture
Max. video resolution
Storage types
MultiMedia, Secure Digital
MultiMedia, Secure Digital
USB
USB 1.1
USB 1.0
HDMI
Wireless
GPS
Battery
Li-Ion
Lithium-Ion rechargeable
Weight
180 g
Dimensions
92 x 58 x 33 mm
Year
2006
2003
Choose cameras to compare
Popular comparisons:
- Yakumo Mega Image 811x vs. Yakumo Mega Image XS
- Yakumo Mega Image 811x vs. Kyocera Finecam S5R
- Yakumo Mega Image 811x vs. Canon EOS 200D
- Yakumo Mega Image 811x vs. Canon PowerShot G7 X Mark III
- Canon EOS 200D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 700D
- Canon EOS 600D vs. Canon EOS 1300D
- Canon EOS 800D vs. Canon EOS 750D
- Canon EOS 1300D vs. Canon EOS 1200D
- Canon EOS 200D vs. Canon EOS 700D
- Canon EOS 1300D vs. Canon EOS 750D
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Yakumo 811x diagonal
The diagonal of 811x sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Kyocera S5R diagonal
The diagonal of S5R sensor is not 1/1.8 or 0.56" (14.1 mm) as you might expect, but approximately two thirds of
that value - 8.89 mm. If you want to know why, see
sensor sizes.
w = 7.11 mm
h = 5.33 mm
w = 7.11 mm
h = 5.33 mm
Diagonal = √ | 7.11² + 5.33² | = 8.89 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
811x sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
S5R sensor area
Width = 7.11 mm
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Height = 5.33 mm
Surface area = 7.11 × 5.33 = 37.90 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
811x pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 3262 pixels
Sensor resolution width = 3262 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.18 µm |
3262 |
S5R pixel pitch
Sensor width = 7.11 mm
Sensor resolution width = 2579 pixels
Sensor resolution width = 2579 pixels
Pixel pitch = | 7.11 | × 1000 | = 2.76 µm |
2579 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
811x pixel area
Pixel pitch = 2.18 µm
Pixel area = 2.18² = 4.75 µm²
Pixel area = 2.18² = 4.75 µm²
S5R pixel area
Pixel pitch = 2.76 µm
Pixel area = 2.76² = 7.62 µm²
Pixel area = 2.76² = 7.62 µm²
Pixel density
Pixel density can be calculated with the following formula:
One could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
One could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
811x pixel density
Sensor resolution width = 3262 pixels
Sensor width = 0.711 cm
Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²
Sensor width = 0.711 cm
Pixel density = (3262 / 0.711)² / 1000000 = 21.05 MP/cm²
S5R pixel density
Sensor resolution width = 2579 pixels
Sensor width = 0.711 cm
Pixel density = (2579 / 0.711)² / 1000000 = 13.16 MP/cm²
Sensor width = 0.711 cm
Pixel density = (2579 / 0.711)² / 1000000 = 13.16 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
811x sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 8.00
Resolution horizontal: X × r = 2453 × 1.33 = 3262
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
Sensor height = 5.33 mm
Effective megapixels = 8.00
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 2453
Sensor resolution = 3262 x 2453
S5R sensor resolution
Sensor width = 7.11 mm
Sensor height = 5.33 mm
Effective megapixels = 5.00
Resolution horizontal: X × r = 1939 × 1.33 = 2579
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Sensor height = 5.33 mm
Effective megapixels = 5.00
r = 7.11/5.33 = 1.33 |
|
Resolution vertical: X = 1939
Sensor resolution = 2579 x 1939
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
811x crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
S5R crop factor
Sensor diagonal in mm = 8.89 mm
Crop factor = | 43.27 | = 4.87 |
8.89 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
811x equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 4.87 = f13.6 - f25.3
Aperture = f2.8 - f5.2
35-mm equivalent aperture = (f2.8 - f5.2) × 4.87 = f13.6 - f25.3
S5R equivalent aperture
Crop factor = 4.87
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Aperture = f2.8 - f4.8
35-mm equivalent aperture = (f2.8 - f4.8) × 4.87 = f13.6 - f23.4
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.