Epson RD1
Specs
Sensor info
Epson RD1 comes with a
23.7 x 15.6 mm CCD sensor, which has a diagonal of
28.37 mm (1.12") and a surface area of
369.72 mm².
If you want to know about the accuracy of these numbers,
click here.
Actual sensor size
Note: Actual size is set to screen → change »
This is the actual size of the RD1 sensor: 23.7 x 15.6 mm
The sensor has a surface area of 369.7 mm².
There are approx. 6,000,000 photosites (pixels) on this area.
Pixel pitch, which is a measure of the distance between pixels, is 7.85 µm.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next.
Pixel or photosite area is 61.62 µm². The larger the photosite, the more light it can capture and the more information can be recorded.
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Epson RD1 has a pixel density of 1.62 MP/cm².
These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how RD1 compares to other cameras, click here.
Pixel or photosite area is 61.62 µm². The larger the photosite, the more light it can capture and the more information can be recorded.
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Epson RD1 has a pixel density of 1.62 MP/cm².
These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how RD1 compares to other cameras, click here.
Specifications
Brand:  Epson 
Model:  RD1 
Effective megapixels:  6.00 
Total megapixels:  6.20 
Sensor size:  23.7 x 15.6 mm 
Sensor type:  CCD 
Sensor resolution:  3020 x 1987 
Max. image resolution:  3008 x 2000 
Crop factor:  1.53 
Optical zoom:  
Digital zoom:  No 
ISO:  200, 400, 800, 1600 
RAW support:  
Manual focus:  
Normal focus range:  
Macro focus range:  
Focal length (35mm equiv.):  
Aperture priority:  Yes 
Max aperture:  
Max. aperture (35mm equiv.):  n/a 
Depth of field:  simulate → 
Metering:  Centre weighted 
Exposure Compensation:  ±2 EV (in 1/3 EV steps) 
Shutter priority:  No 
Min. shutter speed:  1 sec 
Max. shutter speed:  1/2000 sec 
Builtin flash:  
External flash:  
Viewfinder:  Optical (rangefinder) 
White balance presets:  6 
Screen size:  2" 
Screen resolution:  235,000 dots 
Video capture:  
Storage types:  Secure Digital 
USB:  USB 1.0 
HDMI:  
Wireless:  
GPS:  
Battery:  LithiumIon rechargeable 
Weight:  620 g 
Dimensions:  142 x 88.5 x 39.5 mm 
Year:  2004 
Compare RD1 with another camera
Popular comparisons:
 Epson RD1 vs. Fujifilm XPro1
 Epson RD1 vs. Leica M8
 Epson RD1 vs. Ricoh GXR Mount A12
 Epson RD1 vs. Leica M9
 Epson RD1 vs. Olympus OMD EM5
 Epson RD1 vs. Nikon D100
 Epson RD1 vs. Nikon D50
 Epson RD1 vs. Nikon D60
 Epson RD1 vs. Nikon D40
 Epson RD1 vs. Sigma DP2x
 Epson RD1 vs. Sony Cybershot DSCR1
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √  w² + h² 
Epson RD1 diagonal:
w = 23.70 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √  23.70² + 15.60²  = 28.37 mm 
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Width = 23.70 mm
Height = 15.60 mm
Surface area = 23.70 × 15.60 = 369.72 mm²
Width = 23.70 mm
Height = 15.60 mm
Surface area = 23.70 × 15.60 = 369.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =  sensor width in mm  × 1000 
sensor resolution width in pixels 
Epson RD1 pixel pitch:
Sensor width = 23.70 mm
Sensor resolution width = 3020 pixels
Sensor resolution width = 3020 pixels
Pixel pitch =  23.70  × 1000  = 7.85 µm 
3020 
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area =  sensor surface area in mm² 
effective megapixels 
Epson RD1 pixel area:
Pixel pitch = 7.85 µm
Pixel area = 7.85² = 61.62 µm²
Pixel area = 7.85² = 61.62 µm²
Pixel density
Pixel density can be calculated with the following formula:
You could also use this formula:
Pixel density = (  sensor resolution width in pixels  )² / 1000000 
sensor width in cm 
You could also use this formula:
Pixel density =  effective megapixels × 1000000  / 10000 
sensor surface area in mm² 
Epson RD1 pixel density:
Sensor resolution width = 3020 pixels
Sensor width = 2.37 cm
Pixel density = (3020 / 2.37)² / 1000000 = 1.62 MP/cm²
Sensor width = 2.37 cm
Pixel density = (3020 / 2.37)² / 1000000 = 1.62 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → 

Resolution horizontal: X × r
Resolution vertical: X
Epson RD1 sensor resolution:
Sensor width = 23.70 mm
Sensor height = 15.60 mm
Effective megapixels = 6.00
Resolution horizontal: X × r = 1987 × 1.52 = 3020
Resolution vertical: X = 1987
Sensor resolution = 3020 x 1987
Sensor height = 15.60 mm
Effective megapixels = 6.00
r = 23.70/15.60 = 1.52 

Resolution vertical: X = 1987
Sensor resolution = 3020 x 1987
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =  43.27 mm 
sensor diagonal in mm 
Epson RD1 crop factor:
Sensor diagonal = 28.37 mm
Crop factor =  43.27  = 1.53 
28.37 
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Epson RD1 equivalent aperture:
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Epson RD1, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Epson RD1 is 1.53
Crop factor for Epson RD1 is 1.53
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.