Epson RD-1s
Specs
Sensor info
Epson RD-1s comes with a
23.7 x 15.6 mm CCD sensor, which has a diagonal of
28.37 mm (1.12") and a surface area of
369.72 mm².
If you want to know about the accuracy of these numbers,
click here.
Actual sensor size
Note: Actual size is set to screen → change »
This is the actual size of the RD-1s sensor: 23.7 x 15.6 mm
The sensor has a surface area of 369.7 mm².
There are approx. 6,100,000 photosites (pixels) on this area.
Pixel pitch, which is a measure of the distance between pixels, is 7.78 µm.
Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next.
Pixel or photosite area is 60.53 µm². The larger the photosite, the more light it can capture and the more information can be recorded.
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Epson RD-1s has a pixel density of 1.65 MP/cm².
These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how RD-1s compares to other cameras, click here.
Pixel or photosite area is 60.53 µm². The larger the photosite, the more light it can capture and the more information can be recorded.
Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Epson RD-1s has a pixel density of 1.65 MP/cm².
These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how RD-1s compares to other cameras, click here.
Specifications
Brand: | Epson |
Model: | RD-1s |
Megapixels: | 6.10 |
Sensor size: | 23.7 x 15.6 mm |
Sensor type: | CCD |
Sensor resolution: | 3045 x 2003 |
Max. image resolution: | 3008 x 2000 |
Crop factor: | 1.53 |
Optical zoom: | |
Digital zoom: | No |
ISO: | 200, 400, 800, 1600 |
RAW support: | |
Manual focus: | |
Normal focus range: | |
Macro focus range: | |
Focal length (35mm equiv.): | |
Aperture priority: | Yes |
Max aperture: | |
Max. aperture (35mm equiv.): | n/a |
Depth of field: | simulate → |
Metering: | |
Exposure Compensation: | ±2 EV (in 1/3 EV steps) |
Shutter priority: | Yes |
Min. shutter speed: | Bulb +1 sec |
Max. shutter speed: | 1/2000 sec |
Built-in flash: | |
External flash: | |
Viewfinder: | Optical |
White balance presets: | 7 |
Screen size: | 2" |
Screen resolution: | 235,000 dots |
Video capture: | |
Storage types: | Secure Digital |
USB: | |
HDMI: | |
Wireless: | |
GPS: | |
Battery: | Li-Ion |
Weight: | 560 g |
Dimensions: | 142 x 89 x 40 mm |
Year: | 2006 |
Compare RD-1s with another camera
Popular comparisons:
- Epson RD-1s vs. Epson R-D1
- Epson RD-1s vs. Ricoh GXR Mount A12
- Epson RD-1s vs. Leica M8
- Epson RD-1s vs. Leica M8.2
- Epson RD-1s vs. Nikon D100
- Epson RD-1s vs. Fujifilm FinePix X100
- Epson RD-1s vs. Fujifilm X100S
- Epson RD-1s vs. Sony Alpha NEX-6
- Epson RD-1s vs. Leica X1
- Epson RD-1s vs. Contax N Digital
- Epson RD-1s vs. Fujifilm X10
Diagonal
Diagonal is calculated by the use of Pythagorean theorem:
where w = sensor width and h = sensor height
Diagonal = √ | w² + h² |
Epson RD-1s diagonal:
w = 23.70 mm
h = 15.60 mm
h = 15.60 mm
Diagonal = √ | 23.70² + 15.60² | = 28.37 mm |
Surface area
Surface area is calculated by multiplying the width and the height of a sensor.
Width = 23.70 mm
Height = 15.60 mm
Surface area = 23.70 × 15.60 = 369.72 mm²
Width = 23.70 mm
Height = 15.60 mm
Surface area = 23.70 × 15.60 = 369.72 mm²
Pixel pitch
Pixel pitch is the distance from the center of one pixel to the center of the
next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch = | sensor width in mm | × 1000 |
sensor resolution width in pixels |
Epson RD-1s pixel pitch:
Sensor width = 23.70 mm
Sensor resolution width = 3045 pixels
Sensor resolution width = 3045 pixels
Pixel pitch = | 23.70 | × 1000 | = 7.78 µm |
3045 |
Pixel area
The area of one pixel can be calculated by simply squaring the pixel pitch:
You could also divide sensor surface area with effective megapixels:
Pixel area = pixel pitch²
You could also divide sensor surface area with effective megapixels:
Pixel area = | sensor surface area in mm² |
effective megapixels |
Epson RD-1s pixel area:
Pixel pitch = 7.78 µm
Pixel area = 7.78² = 60.53 µm²
Pixel area = 7.78² = 60.53 µm²
Pixel density
Pixel density can be calculated with the following formula:
You could also use this formula:
Pixel density = ( | sensor resolution width in pixels | )² / 1000000 |
sensor width in cm |
You could also use this formula:
Pixel density = | effective megapixels × 1000000 | / 10000 |
sensor surface area in mm² |
Epson RD-1s pixel density:
Sensor resolution width = 3045 pixels
Sensor width = 2.37 cm
Pixel density = (3045 / 2.37)² / 1000000 = 1.65 MP/cm²
Sensor width = 2.37 cm
Pixel density = (3045 / 2.37)² / 1000000 = 1.65 MP/cm²
Sensor resolution
Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher
than maximum (not interpolated) image resolution which is usually stated on camera specifications.
Sensor resolution is used in pixel pitch, pixel area, and pixel density formula.
For sake of simplicity, we're going to calculate it in 3 stages.
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
3. To get sensor resolution we then multiply X with the corresponding ratio:
Resolution horizontal: X × r
Resolution vertical: X
1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.
2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000 → |
|
Resolution horizontal: X × r
Resolution vertical: X
Epson RD-1s sensor resolution:
Sensor width = 23.70 mm
Sensor height = 15.60 mm
Effective megapixels = 6.10
Resolution horizontal: X × r = 2003 × 1.52 = 3045
Resolution vertical: X = 2003
Sensor resolution = 3045 x 2003
Sensor height = 15.60 mm
Effective megapixels = 6.10
r = 23.70/15.60 = 1.52 |
|
Resolution vertical: X = 2003
Sensor resolution = 3045 x 2003
Crop factor
Crop factor or focal length multiplier is calculated by dividing the diagonal
of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor = | 43.27 mm |
sensor diagonal in mm |
Epson RD-1s crop factor:
Sensor diagonal = 28.37 mm
Crop factor = | 43.27 | = 1.53 |
28.37 |
35 mm equivalent aperture
Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture
with crop factor (a.k.a. focal length multiplier).
Epson RD-1s equivalent aperture:
Aperture is a lens characteristic, so it's calculated only for
fixed lens cameras. If you want to know the equivalent aperture for
Epson RD-1s, take the aperture of the lens
you're using and multiply it with crop factor.
Crop factor for Epson RD-1s is 1.53
Crop factor for Epson RD-1s is 1.53
Enter your screen size (diagonal)
My screen size is
inches
Actual size is currently adjusted to screen.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.
If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.