Panasonic Lumix DC-LX100 II

Specs

Brand: Panasonic
Model: Lumix DC-LX100 II
Megapixels: 17.00
Sensor: Four Thirds (17.3 x 13 mm)
Price: check here »

Sensor info

Panasonic Lumix DC-LX100 II comes with a Four Thirds (17.3 x 13 mm) CMOS sensor, which has a diagonal of 21.64 mm (0.85") and a surface area of 224.90 mm².
Diagonal
21.64 mm
Surface area
224.9 mm²
Pixel pitch
3.64 µm
Pixel area
13.25 µm²
Pixel density
7.55 MP/cm²
If you want to know about the accuracy of these numbers, click here.

Actual sensor size

Note: Actual size is set to screen → change »
This is the actual size of the Lumix DC-LX100 II sensor: 17.3 x 13 mm
The sensor has a surface area of 224.9 mm². There are approx. 17,000,000 photosites (pixels) on this area. Pixel pitch, which is a measure of the distance between pixels, is 3.64 µm. Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next.

Pixel or photosite area is 13.25 µm². The larger the photosite, the more light it can capture and the more information can be recorded.

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Panasonic Lumix DC-LX100 II has a pixel density of 7.55 MP/cm².

These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how Lumix DC-LX100 II compares to other cameras, click here.



Specifications

Brand: Panasonic
Model: Lumix DC-LX100 II
Effective megapixels: 17.00
Total megapixels: 21.77
Sensor size: Four Thirds (17.3 x 13 mm)
Sensor type: CMOS
Sensor resolution: 4755 x 3575
Max. image resolution: 4736 x 3552
Crop factor: 2
Optical zoom: 3.1x
Digital zoom: Yes
ISO: Auto, 200-25600 (extendable to 100)
RAW support:
Manual focus:
Normal focus range: 50 cm
Macro focus range: 3 cm
Focal length (35mm equiv.): 24 - 75 mm
Aperture priority: Yes
Max aperture: f1.7 - f2.8
Max. aperture (35mm equiv.): f3.4 - f5.6
Depth of field: simulate →
Metering: Multi, Center-weighted, Spot
Exposure Compensation: ±5 EV (in 1/3 EV steps)
Shutter priority: Yes
Min. shutter speed: 60 sec
Max. shutter speed: 1/16000 sec
Built-in flash:
External flash:
Viewfinder: Electronic
White balance presets: 5
Screen size: 3"
Screen resolution: 1,240,000 dots
Video capture:
Max. video resolution: 3840x2160 (30p/24p)
Storage types: SD/SDHC/SDXC
USB: USB 2.0 (480 Mbit/sec)
HDMI:
Wireless:
GPS:
Battery: Li-ion Battery Pack
Weight: 392 g
Dimensions: 115 x 66.2 x 64.2 mm
Year: 2018

Compare Lumix DC-LX100 II with another camera

vs

Diagonal

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height


Panasonic Lumix DC-LX100 II diagonal:

w = 17.30 mm
h = 13.00 mm
Diagonal =  17.30² + 13.00²   = 21.64 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

Width = 17.30 mm
Height = 13.00 mm

Surface area = 17.30 × 13.00 = 224.90 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

Panasonic Lumix DC-LX100 II pixel pitch:

Sensor width = 17.30 mm
Sensor resolution width = 4755 pixels
Pixel pitch =   17.30  × 1000  = 3.64 µm
4755


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

Panasonic Lumix DC-LX100 II pixel area:

Pixel pitch = 3.64 µm

Pixel area = 3.64² = 13.25 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

You could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

Panasonic Lumix DC-LX100 II pixel density:

Sensor resolution width = 4755 pixels
Sensor width = 1.73 cm

Pixel density = (4755 / 1.73)² / 1000000 = 7.55 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

Panasonic Lumix DC-LX100 II sensor resolution:

Sensor width = 17.30 mm
Sensor height = 13.00 mm
Effective megapixels = 17.00
r = 17.30/13.00 = 1.33
X =  17.00 × 1000000  = 3575
1.33
Resolution horizontal: X × r = 3575 × 1.33 = 4755
Resolution vertical: X = 3575

Sensor resolution = 4755 x 3575


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


Panasonic Lumix DC-LX100 II crop factor:

Sensor diagonal = 21.64 mm
Crop factor =   43.27  = 2
21.64

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

Panasonic Lumix DC-LX100 II equivalent aperture:

Crop factor = 2
Aperture = f1.7 - f2.8

35-mm equivalent aperture = (f1.7 - f2.8) × 2 = f3.4 - f5.6


Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.