Pentax Optio W80

Specs

Brand: Pentax
Model: Optio W80
Megapixels: 12.10
Sensor: 1/2.3" (~ 6.16 x 4.62 mm)
Price: check here »

Sensor info

Pentax W80 comes with a 1/2.3" (~ 6.16 x 4.62 mm) CCD sensor, which has a diagonal of 7.70 mm (0.3") and a surface area of 28.46 mm².
Diagonal
7.70 mm
Surface area
28.5 mm²
Pixel pitch
1.54 µm
Pixel area
2.37 µm²
Pixel density
42.4 MP/cm²
If you want to know about the accuracy of these numbers, click here.

Actual sensor size

Note: Actual size is set to screen → change »
This is the actual size of the W80 sensor: ~6.16 x 4.62 mm
The sensor has a surface area of 28.5 mm². There are approx. 12,100,000 photosites (pixels) on this area. Pixel pitch, which is a measure of the distance between pixels, is 1.54 µm. Pixel pitch tells you the distance from the center of one pixel (photosite) to the center of the next.

Pixel or photosite area is 2.37 µm². The larger the photosite, the more light it can capture and the more information can be recorded.

Pixel density tells you how many million pixels fit or would fit in one square cm of the sensor. Pentax W80 has a pixel density of 42.4 MP/cm².

These numbers are important in terms of assessing the overall quality of a digital camera. Generally, the bigger (and newer) the sensor, pixel pitch and photosite area, and the smaller the pixel density, the better the camera. If you want to see how W80 compares to other cameras, click here.



Specifications

Brand: Pentax
Model: Optio W80
Effective megapixels: 12.10
Total megapixels: 12.40
Sensor size: 1/2.3" (~ 6.16 x 4.62 mm)
Sensor type: CCD
Sensor resolution: 4011 x 3016
Max. image resolution: 4000 x 3000
Crop factor: 5.62
Optical zoom: 5x
Digital zoom: Yes
ISO: Auto, 64 - 6400
RAW support:
Manual focus:
Normal focus range: 50 cm
Macro focus range: 10 cm
Focal length (35mm equiv.): 28 - 140 mm
Aperture priority: No
Max aperture: f3.5 - f5.5
Max. aperture (35mm equiv.): f19.7 - f30.9
Depth of field: simulate →
Metering: Centre weighted, Multi-segment, Spot
Exposure Compensation: ±2 EV (in 1/3 EV steps)
Shutter priority: No
Min. shutter speed: 4 sec
Max. shutter speed: 1/1500 sec
Built-in flash:
External flash:
Viewfinder: None
White balance presets: 6
Screen size: 2.5"
Screen resolution: 230,000 dots
Video capture:
Storage types: SDHC, Secure Digital
USB: USB 2.0 (480 Mbit/sec)
HDMI:
Wireless:
GPS:
Battery: Lithium-Ion (D-LI78)
Weight: 136 g
Dimensions: 100 x 56 x 25 mm
Year: 2009

Compare W80 with another camera

vs

Diagonal

The diagonal of W80 sensor is not 1/2.3 or 0.43" (11 mm) as you might expect, but approximately two thirds of that value - 0.3" (7.7 mm). If you want to know why, see sensor sizes.

Diagonal is calculated by the use of Pythagorean theorem:
Diagonal =  w² + h²
where w = sensor width and h = sensor height


Pentax W80 diagonal:

w = 6.16 mm
h = 4.62 mm
Diagonal =  6.16² + 4.62²   = 7.70 mm


Surface area

Surface area is calculated by multiplying the width and the height of a sensor.

Width = 6.16 mm
Height = 4.62 mm

Surface area = 6.16 × 4.62 = 28.46 mm²


Pixel pitch

Pixel pitch is the distance from the center of one pixel to the center of the next measured in micrometers (µm). It can be calculated with the following formula:
Pixel pitch =   sensor width in mm  × 1000
sensor resolution width in pixels

Pentax W80 pixel pitch:

Sensor width = 6.16 mm
Sensor resolution width = 4011 pixels
Pixel pitch =   6.16  × 1000  = 1.54 µm
4011


Pixel area

The area of one pixel can be calculated by simply squaring the pixel pitch:
Pixel area = pixel pitch²

You could also divide sensor surface area with effective megapixels:
Pixel area =   sensor surface area in mm²
effective megapixels

Pentax W80 pixel area:

Pixel pitch = 1.54 µm

Pixel area = 1.54² = 2.37 µm²


Pixel density

Pixel density can be calculated with the following formula:
Pixel density =  ( sensor resolution width in pixels )² / 1000000
sensor width in cm

You could also use this formula:
Pixel density =   effective megapixels × 1000000  / 10000
sensor surface area in mm²

Pentax W80 pixel density:

Sensor resolution width = 4011 pixels
Sensor width = 0.616 cm

Pixel density = (4011 / 0.616)² / 1000000 = 42.4 MP/cm²


Sensor resolution

Sensor resolution is calculated from sensor size and effective megapixels. It's slightly higher than maximum (not interpolated) image resolution which is usually stated on camera specifications. Sensor resolution is used in pixel pitch, pixel area, and pixel density formula. For sake of simplicity, we're going to calculate it in 3 stages.

1. First we need to find the ratio between horizontal and vertical length by dividing the former with the latter (aspect ratio). It's usually 1.33 (4:3) or 1.5 (3:2), but not always.

2. With the ratio (r) known we can calculate the X from the formula below, where X is a vertical number of pixels:
(X × r) × X = effective megapixels × 1000000    →   
X =  effective megapixels × 1000000
r
3. To get sensor resolution we then multiply X with the corresponding ratio:

Resolution horizontal: X × r
Resolution vertical: X

Pentax Optio W80 sensor resolution:

Sensor width = 6.16 mm
Sensor height = 4.62 mm
Effective megapixels = 12.10
r = 6.16/4.62 = 1.33
X =  12.10 × 1000000  = 3016
1.33
Resolution horizontal: X × r = 3016 × 1.33 = 4011
Resolution vertical: X = 3016

Sensor resolution = 4011 x 3016


Crop factor

Crop factor or focal length multiplier is calculated by dividing the diagonal of 35 mm film (43.27 mm) with the diagonal of the sensor.
Crop factor =   43.27 mm
sensor diagonal in mm


Pentax W80 crop factor:

Sensor diagonal = 7.70 mm
Crop factor =   43.27  = 5.62
7.70

35 mm equivalent aperture

Equivalent aperture (in 135 film terms) is calculated by multiplying lens aperture with crop factor (a.k.a. focal length multiplier).

Pentax Optio W80 equivalent aperture:

Crop factor = 5.62
Aperture = f3.5 - f5.5

35-mm equivalent aperture = (f3.5 - f5.5) × 5.62 = f19.7 - f30.9


Enter your screen size (diagonal)

My screen size is  inches



Actual size is currently adjusted to screen.

If your screen (phone, tablet, or monitor) is not in diagonal, then the actual size of a sensor won't be shown correctly.